35 lines
1.3 KiB
Markdown
35 lines
1.3 KiB
Markdown
|
|
||
|
|
The sofware to setup the GSD for the gateway is here: [Micromeccanica](file:///C:%5CTrabajo%5CManuales%5CMicromeccanica)
|
||
|
|
|
||
|
|
### GSD generator:
|
||
|
|
[HMS PROFINET GSD Generator Tool.exe](file:///C:%5CProgram%20Files%20(x86)%5CHMS%5CPROFINET%20GSD%20Generator%20Tool%5CHMS%20PROFINET%20GSD%20Generator%20Tool.exe)
|
||
|
|
|
||
|
|
The GSD generator must be used connected to the gateway and must have set the correct number of box on the P1 and on the P2 ports.
|
||
|
|
|
||
|
|
This GSD then must be imported on the Tia project.
|
||
|
|
|
||
|
|
|
||
|
|
### Line setup:
|
||
|
|
![[Pasted image 20240715132835.png]]
|
||
|
|
* First setup the Line data.
|
||
|
|
|
||
|
|
### Set the boxes:
|
||
|
|
![[Pasted image 20240715135308.png]]
|
||
|
|
* Here it is possibile to set all the connection on every box.
|
||
|
|
* Every time you ==disconnect one connection here it is taken out form the zone that was previously connected==
|
||
|
|
### Zone setup:
|
||
|
|
***
|
||
|
|
![[Pasted image 20240715135803.png]]
|
||
|
|
|
||
|
|
* Set the number of motor in each area
|
||
|
|
* The type of setup:
|
||
|
|
* Laterally
|
||
|
|
* From the center
|
||
|
|
|
||
|
|
* After set the boxes setup it is allowed to indicate that this motors are available to the zones.
|
||
|
|
* To set the new motor to the zone it must be blinking in blue and are `P0-B0-A0`
|
||
|
|
|
||
|
|
![[Pasted image 20240715135955.png]]
|
||
|
|
|
||
|
|
* On this page can be assinged from any motor that was not previously assigned.
|
||
|
|
* In the case that the motor was wrongly assigned, must be disabled the port on the box setup and re-eabled.
|