{"path":"01-Documentation/SIEMENS & WINCC/TIA Portal/adjuntos/System-Highlights-TiaPortal-V20.pdf","text":"TIA Portal V20 Technical slides Release version 1.1 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant TIA Portal V20 Table of contents Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics Page 2 SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. TIA Portal V20 SIMATIC WinCC Unified Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 4 Performance (ES & compile & RT) • Improve Delta compile capability for connections • ES Resource Monitor Overview of Multiplex Tags • Enhanced performance in runtime • Optimized Tag Multiplexing • Optimize high resolution graphics in ES Engineering Efficiency • Corporate Designer • Version matching custom styles • Target device version for custom styles • Graphic handling • Improvements for display dynamic SVG graphics in preview • Editing SVG images with external application • New set of dynamic widget • Library • Disable use of faceplate types • Create library types: Text lists, Graphics & Scripts • Identify cross references for PLC UDT in faceplates • Identify and filter Unified library types • Faceplates • Popup events • Preview static interface values (WBSE) • Formatted Texts for Text Properties in Faceplates • Property interface with expression and conversion functions • Text list types in Faceplates and Screens (*) • Identify and filter Unified library types • Standardized Engineering • SIMATIC Control Function Library (CFL) Central Color palette • Color palettes in library (*) • Assign color via scripting and via object picker Connectivity • Support nesting depth up to 26 • Native communication channel LOGO! • Indirect addressing 1200/1500- multiplex DB Name (*) • Read/Write a block of data via scripting • Using umlaut in the address of an OPC UA • OPC UA Client – Methods (*) • OPC UA Client – LInt64 & ULInt64 Datatype Support 10001011 10010001 00010000 WinCC Unified V20 (outlook) Engineering Enhancements • Dynamization overview • Enhanced expressions • Rename layer on screen/faceplate level • Activate Control Toolbar Buttons via HMI Screen Item or Script (*) • Display of value scaling / measurement unit conversion • Enhanced Screen Item Navigation and Crosshair Button (*) • System functions • Activate / Deactivate event logger • Start /stop logging (alarms, tag, audit) (*) • change user (via alias, name/pwd) (*) • Trigger • Script is triggered only on tag value change • Tag triggers for Screens and Scheduled Tasks (*) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 5 Alarm Control enhancements • Multiline display • Paging for reading of alarm archives • Filtering for all columns Runtime persistency (PC RT) • On demand persistency and auto persistency for global and personalized settings for alarm control, trend controls, f(x) Unified Data Hub (PC RT) • Access to data from offline UDH clients • Automatic backup and restore • 3rd party access via GraphQL Parameter Control • Extended number of parameter sets (4000 Elements) • Control Usability • Definition of sorting the parameter sets at ES • Search parameter set at RT • Numeric keyboard support for PaCo • Audit support of PaCo • Use of single Tags Others • Numeric keyboard for Unified UxP • Limit a zoom level • Debugging of JavaScript via VS Code (*), Simatic Unified Air app (*) • New access to online documentation Specific start screen (PC RT) • User specific start screen • Role specific start screen Redundancy (PC RT) • Data redundancy of • Current and logged process values • Pending and logged alarms • Audit trail, Parameter sets • Supporting S7-300, S7-400, S7-1200, S7-1500 • Base UI redundancy Module Type Package (MTP) • SIMATIC MTP Integrator for WinCC Unified Process Diagnostics • Change Graph sequence of Graph & ProDiag Overview Control during Runtime (*) • PLC Code View – Tooltip texts for abbreviated texts WinCC Unified V20 (outlook) User Management • Authentification via system function • ChangeUser (Username & PWD) • Secure login without password (Alias) • Support of RFID in Central User Management (PC) • Global search for RT rightsAudit • Audit of Parameter sets • Audit for alarm operations (shelve, hide) • Configurable ESig procedure (*) • Manipulation detection on audit files (*) WinCC Unified V20 - Scalability New device versions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 6 New device version for ✓ PC Runtime ✓ Unified Comfort Panels ✓ Unified Basic Panels New features are available in the corresponding device version only ➢ Upgrade the Unified devices ➢ Upgrade Faceplates in library (if necessary) ➢ Upgrade Custom Web Controls in projects (if necessary) Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Performance Compile Performance Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 7 Compile performance has been improved in certain scenarios Rebuild should be around 20% - 40% faster compared to V18 depending on the project contents (already V19 Update 1) Delta Compile improvements are visible when ➢ Compiling screens ➢ Compiling small changes in JavaScripts Delta Compile is the preferable compile method! Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Performance Optimize high resolution graphics in ES during configuration Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 8 Optimize high resolution graphics in ES during configuration Bitmap images are resized during compilation to improved runtime performance due to optimized graphics ➢ Resize is based on the usages of the images e.g., high-resolution bitmap used for a button image is resized automatically to the necessary dimension ➢ No recognizable quality change visible in runtime SVG-files are not resized, only bitmap graphics can be resizedNew checkbox Unified Comfort Panel WinCC Unified PCUnified Basic Panel WinCC Unified V20 - Performance Optimized Tag Multiplexing Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 9 Tag multiplexing is optimized for a reduced screen load time ➢ Multiplexing only on demand for subscribed tags ➢ Displaying Warning for count over limits. ➢ Performance hint in engineering (resource monitor) The Resource Monitor can calculate • Number of Multiplex Tags (Index and DBName) with more than 200 Child members • Warning Message for user in Overview with HMI Tag Names when there are more tags configured than the limit • Device Limits : UBP : 5, UCP : 10, UPC : 20 Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Engineering Enhancements Dynamization overview Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 10 Get a fast overview of dynamized objects on screen or faceplate level ➢ Display the dynamized objects: Script, expressions, trigger ➢ Available for screens and faceplates and nested faceplates ➢ Jump directly to the dynamized object Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Engineering Enhancements New possibilities with Expression Dynamization Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 11 Functionality of expressions was extended: ➢ Support of ➢ Mathematical operators ➢ Relational operators ➢ Bitwise functions ➢ Text property dynamization in Expressions ➢ Usability improvements ➢ Copy, paste, delete, reorder ➢ validation of expression condition during engineering ➢ Copy expression from one screen item to another screen item Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 - Engineering Enhancements System function for start / stop logging Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 12 Start and stop the logging in WinCC Unified Stop and start the logging, if necessary, e.g. ➢ Only log over dedicated time ➢ Start log on a dedicated occurrence (Error on plant floor, Product category) ➢ Logging service for different production operation modes (log for Production, log for maintenance) Start and stop is available for.. ➢ Tag Logging ➢ Alarm Logging ➢ Audit Trail Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 - Engineering Enhancements Rename layers at screens and faceplates & Jump to highlighted object in huge screens Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 13 Rename layers at screens and at faceplates individually Individual and central renaming of layers can support the structure of your projects! ➢ Layers of screens can be central renamed in the runtime settings ➢ Layers of individual screens or faceplates can be renamed separately ➢ Full script support accessing renamed layers Unified Basic Panel Unified Comfort Panel WinCC Unified PC Jump to highlighted object in huge screens Enhanced functionality when navigating screen items on a huge screen ➢ Crosshair button to center and zoom the selected screen item when working on the editor WinCC Unified V20 - Engineering Efficiency Improvements for dynamic SVG graphics & editing SVG images with external program Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 14 Improved thumbnail preview for dynamic widgets ➢ Dynamic widgets are displayed with the colors predefined in the SVGHMI • Same rendering for SVG types in Preview – window for dynamic SVG types as in screen editor • Drag & Drop new dynamic widget from the Toolbox into the editor of a dynamic SVG type inside the library Unified Comfort Panel WinCC Unified PCUnified Basic Panel Editing SVG with external program ➢ External editor for SVG files can be used for editing directly from TIA Portal ➢ 'Edit' is available on the context menu for SVG objects in Graphics, Graphic Lists, and Graphic types (Library) WinCC Unified V20 - Engineering Efficiency Widgets - new dynamic widgets available Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 15 New set of Dynamic Widgets (Dynamic SVGs) ➢ New Dynamic Widgets delivered with TIA V20 to organize, analyze and visualize information by showing relationships and categories • Circular bar charts • Bar charts • Stacked bar charts • Bubble charts • Pie charts Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Engineering Efficiency Library – Disable use of Faceplate Types Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 16 Unified Comfort Panel WinCC Unified PCUnified Basic Panel Faceplate can be set with a “Do not Use” Flag Disable the instantiation of faceplates in the Global Library for a further use in a project Mark a faceplate not to be used as it is “obsolete” or should be a “template” faceplate. ➢ If flag is set the instantiation of faceplate in screen is not possible ➢ Only duplicate, modify and instantiate the duplicate Info: Valid only for Unified devices WinCC Unified V20 - Engineering Efficiency Library – Create library types from project & use text list types in faceplates and screens Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 17 Creating library types out of existing project items like text lists to save time and manage a workflow Create library types from your project via context menu with single- and multi-selection support of ➢ Text lists ➢ Graphics ➢ Script Modules Unified Comfort Panel WinCC Unified PCUnified Basic Panel Configure a text list from your project library in faceplates or screens Two steps are necessary at a text property: 1. Select Resource list as the Dynamization 2. In the Setting select a Tag as an index and pick the version of the resource list WinCC Unified V20 - Engineering Efficiency Library - identify cross references Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 18 Cross Reference for PLC UDT in Unified Faceplates ➢ Cross reference shows PLC UDT used at interface tag in Unified Faceplates ➢ PLC UDT used in tag or script dynamization, or on at event function lists and event scripts are shown in cross reference views ➢ Screen items of Unified Faceplates which are using PLC UDT member are shown in cross reference view Using cross reference for PLC UDT and Unified Faceplates saves a lot of time! Unified Comfort Panel WinCC Unified PCUnified Basic Panel WinCC Unified V20 - Engineering Efficiency Library - Identify and filter Unified library types (Faceplates) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 19 Immediately identify Unified Faceplate from non-Unified Faceplates Fast distinguish between different device types, if you configure or migrate ➢ Unified Faceplates are displayed with the icon ➢ Non Unified Faceplates are displayed with the icon Unified Basic Panel Unified Comfort Panel WinCC Unified PC The library view can be filtered between Unified types and Adv/Prof types ➢ See only types which can be use on a Unified device ➢ See only types for an Adv/Prof device ➢ See all WinCC Unified V20 - Engineering Efficiency Faceplates - Formatted Texts for Text Properties of Screen Items in Faceplates Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 20 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Format Texts inside faceplates with parameter tags via context menu ➢ Static texts can be formatted now as usual in screens ➢ Insert parameter fields with Tags value support ➢ No support for textlist based parameter fields Format texts supports efficient engineering without the need of scripts in faceplates WinCC Unified V20 - Engineering Enhancements Standardization | Central color palette – as library object Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 21 Define and update colors centrally 1 Color Palette as new Library type ➢ 500 named colors can be configured ➢ Works as a standard library type Configuration for a device ➢ Assign to a device in Runtime settings Unified Basic Panel Unified Comfort Panel WinCC Unified PC 1 Since V19 Update 2 the feature is available in scripts including faceplates. WinCC Unified V20 - Engineering Enhancements Standardization | Central color palette – usage via scripting including faceplates Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 22 Define and update colors centrally 1 Configuration for a Faceplate ➢ Assign to a Faceplate Type Hint: Works as a preview. Color Configuration in scripts ➢ Configure colors by index from the assigned Color Palette via NEW object picker Hint: There is a tooltip to display Color Palette and detailed color information as well. Unified Basic Panel Unified Comfort Panel WinCC Unified PC 1 Since V19 Update 2 the feature is available in scripts including faceplates. New with V20 WinCC Unified V20 - Engineering Enhancements Standardization | Central color palette – usage for screens/screen items including faceplates Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 23 Configure colors via object picker for color properties ➢ Static properties (Top level and Embedded) ➢ Dynamics (Tag and Flashing) ➢ Expressions ➢ Interface properties o Custom properties of Dynamic SVG's (incl. Library) o Faceplate interface properties of a Faceplate instance o Custom control properties o Collected properties of contained items of a Group ➢ Faceplate properties (All properties from above) Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Engineering Efficiency Corporate Designer – Target device version for custom styles Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 24 Corporate Designer – Target device version for custom styles ➢ Multiple versions of custom styles can be created .cd19 for V19 devices .cd19_0_0_2 for V19 Upd2 devices .cd20 for V20 devices ➢ The version of existing custom styles can be changed ➢ If a non-matching style remains selected after a project upgrade, the user is informed by a corresponding compile error ➢ The version matching custom styles are automatically selected after device change → Available via SIOS #109824234 Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Connectivity Multiplexing - Data Block Name Multiplexing Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 25 Extends the Address Multiplexing capabilities by making the Data Block Name selectable A new way to access identical structured PLC Data ➢ HMI Tag needs to reference a PLC tag of one Data Block only ➢ Support for Data Blocks inherited from FBs or PLC UDTs with symbolic access ➢ Use a System Function to change the Data Block Name of the tag in Runtime ➢ Additional electronic record for Audit Trail ➢ Starting from V20 the configuration can be done via Excel or Openness import Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 - Connectivity OPC UA - Using umlaut in the address of an OPC UA Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 26 Customer can use a Tag with special characters as umlaut (Ä, Ö, Ü) in the address from an OPC UA Server easily access tags with umlauts in their nodled address names without having to edit the name of each affected tag. ➢ Supported are all Unicode Characters, except the Unicode Control Characters. Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 - Connectivity OPC UA Client - LInt64 and ULInt64 Datatype Support for OPC-UA Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 27 Unified Basic Panel Unified Comfort Panel WinCC Unified PC OPC UA Client – Data Access ➢ OPC-UA Client DA now supports LInt64 and ULInt64 datatypes for communication in V20 and above devices only. ➢ These datatypes can also be imported/exported for OPC- UA Communication Driver via Excel or via Openness for V20 devices WinCC Unified V20 - Connectivity OPC UA Client - Methods Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 28 Unified Basic Panel Unified Comfort Panel WinCC Unified PC OPC UA Client - Methods You have the option of reading or writing tags from the OPC UA server, now even complex function sequences can be started via OPC UA ➢ Method calls are a fundamental part of the OPC UA specification. Methods are comparable to the Remote Procedure Calls (RPC) long known in computer science. They offer the possibility of efficiently executing RPC calls in the automation world and thus reduces the classic handshake patterns for communication between devices. as of V19 Update 2 WinCC Unified V20 - Analysis & Operations Process Diagnostics – change connection of overview controls Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 29 Change Connection of Process Diagnostic Overview Ctrls Overview Control connection can be changed at runtime to view information of another PLC / Instance DB instead of static configuration only. ➢ Supported for Overview Controls • Graph overview • ProDiag overview ➢ Dynamize the connection for the overview controls via JavaScript • PLC name • DB name to be visualized Unified Basic Panel Unified Comfort Panel WinCC Unified PC In ES static connection configuration is no longer enforced. In RT change connection via Script. Change connection for ProDiag Overview and GRAPH Overview dynamically in RT. as of V19 Update 2 WinCC Unified V20 - Analysis & Operations Process Diagnostics – PLC Code View – Tooltip texts for abbreviated texts Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 30 Tooltip texts for abbreviated texts in PLC Code View To see full text of abbreviated texts in PLC Code View, mouse hover and long touch press show full text in a tool tip text. Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 - Engineering Enhancements Alarm Control enhancements – multiline of alarms Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 31 Alarm Control - support of automatic multiline text Alarm texts that are too long to be displayed in its column are automatically wrapped, so that the entire text can be read ➢ Text wrapping is supported for the following columns of Alarm - Information, Alarm Text & Additional Text 1 to 9 ➢ In TIA Engineering while selection mode is set to \"Single.\" ➢ When column with Alarm text configured with lengthy text is selected, Alarm text will be wrapped to fit in the increased row height. Unified Basic Panel Unified Comfort Panel WinCC Unified PC Alarm control before automatic line break Alarm control after automatic line break as of V19 Update 2 WinCC Unified V20 – Option Audit Audit – Support for PaCo Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 32 Enhanced Parameter Control to support Audit functionality to record all paco operations Track changes of the parameter control in order to support GMP requirements ➢ Control operation being tracked: Create Save SaveAs Rename Delete WritePLC ReadPLC Import Export ➢ System functions operation being tracked: ReadAndSaveParameterSet LoadAndWriteParameterSet ImportParameterSets ExportParameterSets ReadParameterSet WriteParameterSet CreateParameterSet SaveParameterSet LoadParameterSet DeleteParameterSet RenameParameterSet ReadAndSave LoadAndWrite Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 – Option Audit Audit – Electronic records for user related alarm changes Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 33 Generation of electronic records for user related alarm operations Discrete and Analog alarms can be configured for GMP relevant operation changes: acknowlege, shelve, unshelve. ➢ Configuration based on Audit classes to reduce engineering effort ➢ Alarm control operations related to GMP relevant alarms are managed by Audit: suporting tracking, confirmation and ESIG. Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 – Option Audit Audit – Manipulation detection on audit files Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 34 Export/Import of audit files are checked against manipulation Exported files from Audit Viewer contains a manipulation check based on generated Audit certificate ➢ On import audit files into the Audit Viewer, electronic records are validated against the corresponding Audit certificate to identify potential manipulations Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 – Option Parameter Control Parameter Control – Extended number of Parameter Set Type elements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 35 Enhanced ParameterSet functionality with support from 1,000 to 4,000 elements All the PaCo operation are extended to support for 4000 elements ➢ Parameter control view ➢ System Function ➢ Scripting ➢ Control Tag Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 – Option Parameter Control Parameter Control – Search / Filter Support for PaCo Control Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 36 Enhanced Parameter Control view to easy user of find elements and performing operation in the view better Search parameter set elements of a recipe to find easily specific elements in a huge parameter set ➢ Display or hide the search field via a separate toolbar button ➢ Search for elements in nested UDT structures Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 – Option Parameter Control Parameter Control – Sort support for PaCo Control Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 37 Enhanced Parameter Control to support Parameter Set Type and Parameter Set level sorting based on the ID and Name Sort parameter set types or parameter sets ➢ Pre-defined in Engineering • Sort criteria: Name or ID of parameter set / type • Sorting direction: Ascending or Descending ➢ Sorting can be changed at runtime • Change sorting during runtime via SystemFct “SetPropertyValue” or via Enumeration in Scripting: HMIRuntime.UI.Enums.HmiSortDirection.Ascending Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 – Option Parameter Control Parameter Control – Audit Support for PaCo Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 38 Enhanced Parameter Control to support Audit functionality to record all paco operations Track changes of the parameter control in order to support GMP requirements ➢ Control operation being tracked: Create Save SaveAs Rename Delete WritePLC ReadPLC Import Export ➢ System functions operation being tracked: ReadAndSaveParameterSet LoadAndWriteParameterSet ImportParameterSets ExportParameterSets ReadParameterSet WriteParameterSet CreateParameterSet SaveParameterSet LoadParameterSet DeleteParameterSet RenameParameterSet ReadAndSave LoadAndWrite Unified Basic Panel Unified Comfort Panel WinCC Unified PC WinCC Unified V20 – Personalized UI Persistency of control settings Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 39 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Retain of changed controls settings while switching the screens during runtime and session over spanning ➢ User specific personalization of controls in a screen ➢ Enable the persistency of changed Control settings (Alarm Control, Trend Control and Function Trend Control) at TIA portal on device level ➢ Persistency can be set Automatically • Save the current personalized setting on screen change • Discard the user settings on screen change ➢ Persistency can be stored • Personalized by every user • Globally (as new default) by users with a selectable role ➢ Persistency can be reset as defined at engineering On screen change, the control settings are persistent automatically On screen change, the control settings are withdrawn Users with the selected role are able to set new default settings for controls WinCC Unified V20 – Personalized UI Persistency of control settings at screen change – persistency on screen change Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 40 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Enable retain of changed settings while switching the screens during runtime for controls within a screen ➢ Enable / disable the persistency “on screen change” at TIA portal on device level ➢ At runtime, a change of a control setting as positioning, size and control specific setting are kept after switching the screens and going back • The settings are stored user specific • Available for Alarm Control, Trend Control and Function Trend Control • The setting is “stored” for the control within this screen Changes in the control are discarded with screen change Default after upgrading to a V20 device Changes in the control are persisted with screen change WinCC Unified V20 – Personalized UI Persistency of control settings at screen change – define a new default setting Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 41 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Define new global or user specific control settings ➢ Manual definition of changed setting of a control (Alarm Control, Trend Control and Function Trend Control) by executing a control function (user profile settings) ➢ Definition of new user specific control setting available for users without certain rights ➢ Definition of new global control settings available for users with pre-defined function rights User with assigned right is able to save a new global or user specific setting by pressing User without assigned right is able to save a user specific setting by pressing A reset to default pre-engineered settings is possible WinCC Unified V20 – Personalized UI Unified Station Configurator – User and Role specific Start screen Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 42 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Define a start screen regarding a user or on a user role Define a specific start screen to a fast access to the tasks at Runtime ➢ for dedicated user ➢ for different user roles ➢ Different user roles can be prioritized User is logged on → is a user specific start screen available? → is user assigned to a role with a specific start screen? Use of start screen with “highest priority” The definition of start screen is accessible via the “my WinCC Unified” web page or via the Unified Station Configurator WinCC Unified V20 - Redundancy Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 43 Keep the operation running even on hardware failure ➢ Automatic switch-over to a hot stand-by server on failure to enable the continuation of production ➢ No loss of archived data on switch-over • Archived tags • Archived alarms • Audit trail • Paco ➢ Attached clients switch over to the new primary server in case on server failure Primary server Secondary server Unified Basic Panel Unified Comfort Panel WinCC Unified PC as of V19 Update 2 WinCC Unified V20 - Redundancy Functional scope V20 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 44 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Data redundancy: ➢ Logging of process values and alarms ➢ Pending alarms and current process values (external and internal tags) ➢ Audit trails ➢ Parameter Control Communication: ➢ S7-1200, S7-1500, S7-300, S7-400 UI Redundancy ➢ Base UI Redundancy Status and diagnosis of redundant stations Secure communication between the redundant partners Prerequirements ➢ Database Logging (MS SQL) ➢ Both PCs • need to be time synchronized • same hardware and operating system installation • configured identical ➢ Automated client switchover only with central user management available Limitations – what`s not support: ➢ OPC UA and 3rd party connections ➢ System and Process Diagnostics ➢ Options: Report Execution, Collaboration, PI Options ➢ Unified Data Hub must not run in parallel WinCC Unified V20 - Engineering Efficiency SIMATIC Control Function Library (CFL) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 45 WinCC Unified SIMATIC TIA Portal Control Module M Local Operation symbols & faceplates CFL function blocks S7-1xxx HW / SW controller Unified Basic Panel Unified Comfort Panel WinCC Unified PC Standardized module engineering with a modular and memory optimized library, offering: ➢ TIA Portal STEP 7 (S7-1xxx HW / SW controller ) and WinCC Unified Objects with optimized footprint & performance, (Industry-specific blocks like Aggr8, TimeSwitch, SetCrv, …) ➢ State of the art TIA Portal Engineering based on PLCOpen ➢ Supports virtual commissioning based on PLCSIM Advanced and SIMIT with ready to use templates tailored to CFL CFL can be used in MTP and Non-MTP Use Cases ➢ Faceplates aligned to WinCC Unified Look & Feel (HMI Design based on HMI Template Suite) ➢ Corporate Design via SIMATIC WinCC Unified Corporate Designer / TIA Portal Standardized Operation Latest Version on : Simatic MTP SIOS Landing Page WinCC Unified V20 - Engineering Efficiency SIMATIC Control Function Library (CFL) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 46 Control • PIDCtrl • Aggr8 • TimeSwitch8 • SetCrv • Polygon Interlock • LockView4 • LockView8 Drives • MonBinDrv • MonAnaDrv • MonBinVlv • MonAnaVlv Monitor • AnaMon • BinMon • DIntMon • StringView Operate • AnaManInt • BinManInt • DIntManInt Common Blocks • Maintenance • DriveInterconnector FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP MTP Service Framework • Service • Procedure • Config Parameter • Procedure Parameter FP New Unified Basic Panel Unified Comfort Panel WinCC Unified PC CFL - Industry-specific blocks Optimized footprint & performance for S7-1xxx HW / SW controller & WinCC Unified Latest Version on : Simatic MTP SIOS Landing Page Hydrogen TIA Portal Application Examples based on CFL Rectifier WinCC Unified V20 - Process Orchestration Modular automation - MTP Integrator for WinCC Unified Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 47 No. of Package Units / Machines : Unified PC RT: 10 // Unified Comfort Panel: 3 MTP Import & Integration in WinCC Unified Process Equipment Assemblies SIMATIC WinCC Unified PC WinCC Unified ES + MTP Integrator Import Integrate standardized MTP package units / machines in WinCC Unified, including PLC and HMI components ➢ Standardized, line operation of package units / machines Use MTP files (Siemens or 3rd party) to integrate (cross- vendor ) machines automatically ➢ By instantiating the machine type within your project, the OPC UA connections, PLC tags and HMI components are created with just one click. Controlling complete units / machines in an abstract way ➢ Operators can focus on the production without needing to understand details of each multi-vendor machine. ➢ Maximized operational efficiency, reduced training effort and consistency regarding operation, even if new modules are added modified due to changing market demands. Latest Version on : Simatic MTP SIOS Landing Page Control and Operate for Discrete IndustriesEnd customer & System IntegratorsProcess Orchestration Layer (POL) Unified Basic Panel Unified Comfort Panel WinCC Unified PC Module Type Package (MTP) WinCC Unified V20 - Process Orchestration Reduce engineering effort by -70% 1) and Increase flexibility by +80% 1) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 48 1) Source: ZVEI, 2022 2) Implementation compliant to the noted parts of the MTP Specification (VDI/VDE/NAMUR 2658) 3) Concepts for runtime interoperability (part 5/5.1) and alarming (part 6/7) are not fully specified, yet ➢ MTP Import in WinCC Unified Engineering2) ➢ Type management incl. full versioning for your MTP files ➢ PEA instance management ➢ Static and dynamic HMI Integration (MTP Part 2 + 3) ➢ Monitoring and control via Faceplate (blockicons and detailed views) Orchestration of plantwide HMI (part 3) ➢ Manual operation of MTP Services via HMI (part 4) ➢ MTP Multilanguage Support ➢ Native OPC UA communication with configurable levels of security mechanisms (draft part 5/5.1) 3) ➢ POL-based alarms (draft part 6/7) 3) New New Unified Basic Panel Unified Comfort Panel WinCC Unified PC Latest Version on : Simatic MTP SIOS Landing Page Control and Operate for Discrete Industries Module Type Package (MTP)End customer & System IntegratorsProcess Orchestration Layer (POL)End customer & System IntegratorsProcess Orchestration Layer (POL) WinCC Unified V20 - Process Orchestration SIMATIC MTP Integrator for WinCC Unified Trial – Simply try it out Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 49 MTP trial – Simply try it out Try our 30-day rapid line automation engineering with MTP trial. No installation is required. Start exploring in minutes. (Chrome/Firefox/Edge/Safari recommended) Easily adapt production lines to fast-changing consumer demands with a module based standardized approach ➢ Adding new equipment or modifying an existing and running production line is typically complex, time consuming and risky ➢ Cell or line visualization required for better overview and central operation needs, if manually engineered, consumes substantial time and effort and is error prone ➢ With the standardized Module Type Package (MTP) approach, you can reduce risk, engineering effort and downtime, as well as shorten the time to easily integrate new equipment into an existing production line ➢ MTP is a widely standardized and market-proven technology that can be purchased off-the-shelf Unified Basic Panel Unified Comfort Panel WinCC Unified PC Module Type Package (MTP) TIA Portal V20 SIMATIC WinCC Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 50 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. WinCC Innovations V20 Highlights WinCC RT Advanced Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 51 WinCC ES ➢ WinCC RT Advanced can be engineered with TIA V20 ➢ Library enhancement filter library types for RT Advanced No new RT Advanced version Ensured Compatibility of WinCC Advanced ➢ Newest update of stable V17 version of RT Advanced available ➢ No new licenses necessary for WinCC RT Advanced V17 necessary WinCC Innovations V20 Highlights WinCC RT Professional Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 52 Maintainabilty Support of MS SQL 2022 Communication UDT support - Max char 127 (depth 26) Up to 8 S7 connections are included in the WinCC RT prof basic license TIA Library Enhancement filter library types for RT Professional SVGHMI Library Embedding SVGHMI Graphics in WinCC RT Professional Screens Same Library as WinCC V8 or WinCC Unified WebUX – Deep link Direct access to specific screens or functions within the application WebUX – Recipe Support of recipe control WebUX – AR APP Support for SIMATIC Unified AR App for iOS WebUX – License New licenses for WebUX max clients TIA Portal V20 SIMATIC STEP 7 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 53 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. STEP 7 – Innovations SIMATIC Source Documents: New export format for LAD blocks, DBs & UDTs RUNG wire#powerrail Contact( a ) Contact( b ) c.Ctud{ dint }( cd := wire#w1 , r := g , ld := , pv := , qd := , cv := ) END_RUNG RUNG wire#powerrail Contact( d ) contact( e ) END_RUNG wire#w1 a b d e CTUD DINT cu r pv qu cv c cd ld qd g 1 Code Build Test of component Release component Build machine project Identify improvement Simulate & test machine project Monitor Deploy Operate Generalize Standardize components Customize machine project Operate machine/line/plant Plan DevOps 4 Automation Features • Human readable representation of graphical code • Source code only - no internal meta information • Version independent syntax • Including multilingual comments • Works for LAD and F-LAD & DBs & UDTs • Accessible via Openness and VCI* Benefits • Human-readable representation ensures easy use with external tools (e.g. GIT, Beyond Compare, …) and code generators • Version-independent syntax simplifies compatibility when sharing source code across various TIA Portal versions • Easy tracking of safety block changes in external code repositories Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 54 *With a V20 Update STEP 7 – Innovations Named value data types within Software Units – Online improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Speaking names for named values Since V19 user can create within Software Units data types with named values (NVTs). Now during online actions like monitoring and trace, we display the values such as the defined and meaningful names. New Features • Online displaying speaking names for NVTs at • Code block editor (SCL, LAD/FBD, Graph) • DB interface editor • Watch- and force table editor • Trace • Applying Namespace of Software Unit to underlying NVTs • Openness Import/Export of NVTs Page 55 Improved commissioning and maintenance efficiency STEP 7 – Innovations Named value data types – Textual Interface & Library improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides New Features • Textual interfaces are supporting NVTs • NVTs as library types • Safety blocks in type library can utilize NVTs • NVTs can be part of typed knowhow protected blocks Page 56 STEP 7 – Innovations Named value data types – tracing with PLC Trace Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Tracing Named Value Tags The trace recognizes NVTs directly in trace definition. Recorded values in the diagram are automatically resolved to NVT definition and displayed accordingly. Benefits • Automatic representation of tag names, instead of numerical representation • Tags can be used as trigger • Undefined states are also visible in diagram • NVTs are supported in all traces ((long-term) trace, (long-term) project trace) Page 57 STEP 7 – Innovations General Improvements Increased nesting depth for structures • For S7-1500 >= 4.0 the nesting depth for PLC data types, STRUCT tags, and ARRAY of STRUCT/UDT tags has been increased from 8 to max. 26 elements • Using an ARRAY of STRUCT/UDT, which requires 3 hierarchical levels each, reduces the maximum nesting depth accordingly Font adoption for title & comments • Font type can be changed for block and network title and comments via Global setting • Using monospace fonts comments can be easier structured • Network titles & comments can be zoomed in / out Is_Array / Count- & TypeOfElements for ResolvedSymbol • These functions can now also be used for resolved symbols: • Is_Array • CountOfElements • TypeOfElements • Allows appropriately handling of arrays from a resolved symbol Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 58 STEP 7 – Innovations General Improvements Tagtable: Sort by value • Natural sorting of user and system constants in the filter view of the tag table editor Hide Download Preview & Sync Dialog • Hide Download Preview / Finished & Synchronize before loading dialogs • Only shown, when user interaction necessary Go To Definition – Improved behavior in Textual Interface Editor • Enhanced the Textual Interface Editor (SCL only) for improved navigation to complex declarations of UDTs, Blocks, and NVTs. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 59 STEP 7 – Innovations General Improvements Search Replace improvements • In the Project Navigator Overview now search & replace in the details view is possible • Local search can now be directly continued for the rest of the block. Improved Software Unit download behavior • Before download, the relations between the Software Units are checked more thoroughly. • Loading dependent Software Units is only necessary if components of the other Software Unit are actually used F7 block open improvements • Search scope of dialog is now always the complete PLC (context independent) • Increased size of drop-down box for better readability • Adjusted size of drop-down box is stored Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 60 A B BA TIA Portal V20 SIMATIC Motion Control Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 61 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. New Hardware S7-1500 T/TF with FW V4.0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 62 • CPU S7-1516T-3 PN • CPU S7-1516TF-3 PN • CPU S7-1517T-3 PN • CPU S7-1517TF-3 PN • CPU S7-1518T-3 PN • CPU S7-1518TF-3 PN Program Memory Data Memory PLC Program Performance (bit instr. ns) New Hardware S7-1500 T/TF S7-1500 1516T / 1517 / 1518 CPUs • Support for standardization that requires more memory for more code and the reliability on performance to new amount of code • Higher communication performance to address the IT/OT communication use case • More Motion Control Performance to meet high end applications 3 3 3 9 3 3 6 18 0% +100% +100% • New hardware for S7-1500 1516T(F) / 1517T(F) / 1518T(F) CPUs: More memory, More Performance, Higher communication performance, second IRT Interface, 64 IO-Devices per IRT Interface or 256 IO-Devices per IRT Interface with DFP, G-Bit Interface, secure boot, functional compatible to previous CPU generation 1516F 1516T(F) 1517T(F) 1518T(F) 7,5 7,5 12 60 7,5 25 50 150 +233% +317% +150% 1516F V3.1 – for comparison (no changes) 1516 +200% 1517T(F) +233% 1518T(F)1516T(F) +400% Page 63 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides X1 X3X2 CPU 1517/ CPU 1518 New Hardware S7-1500 T/TF S7-1500 1516T / 1517 / 1518 CPUs • Significant PLC program performance increase ➢ Easier controller selection ➢ More customer use cases can be realized • Retain Memory increase 1511/1513 1515/1516 1517 15181516T(F) +233% +400% 0,3 ns 0,6 ns 1,2 ns 6 ns6 ns +300% +200% PLC Program performance 1511/1513 1515/1516 1517 +186% +486% 4.500 2.200 512 128 768768 128 512 15181516T(F) 5121.024 +100% Retain memory in kByte Page 64 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides • Motion Control Resources increase up to +100% New Hardware S7-1500 T/TF S7-1500 1516T / 1517 / 1518 CPUs 1511 1515 1516T 1517 1518 1120 2400 6400 10240 15360 1120 2400 12800 20480 30720 +100% +100% +100% • Extended Motion Control Resources increase up to +200% 1511T 1515T 1516T 1517T 1518T 90 120 192 256 520 90 120 540 720 1560 +181% +181% +200% 1511 1515 1516T 1517 1518 11 11 55 70 140 11 11 115 125 205 +109%+109% +79% +46% Motion Control Performance Positioning Axes / Servo/IPO 4 ms / CPU Load 35% MC * 1511T / 1515T V3.1 – for comparison (no changes with FW V4.0) * Depending on the application Page 65 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides FW V3.1 (current article no.) FW V4.0 (new article no.) New Hardware S7-1500 T/TF S7-1500 1516T / 1517 / 1518 CPUs New mechanical design • The display is now integrated into the CPU like in the new 1515/1516 CPUs • Installation dimensions remain identical • RUN/STOP switch is replaced with RUN/STOP buttons • No more \"cancelling\" of the RUN/STOP switch • \"STOP ACTIVE\" indicates that the CPU was switched to STOP via the STOP button • Memory reset/Reset operation: Identical as before • Display can now be read – even when the cover is open • Mechanical manipulation protection is retained • New Display implementation • No separate Display FW needed Page 66 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides New Hardware S7-1500 T/TF Compatibility of CPU 1516T / 1517 / 1518 with new HW • FW V4.0 only for new article numbers • No PROFIBUS Interface on board → No spare part compatibility • Fully functional compatible (except PROFIBUS DP). STEP 7 project can be used in the new CPU after “change device” in HW config. • Parallel delivery of the old and new HW for 6-12 month: TIA Portal V20 6-12 month Current HW / FW ≤ V3.1 New HW / FW V4.0 New HW FW V4.0 current HW FW ≤ V3.1 ╳ Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 67 New SIMATIC Software Controller T(F) with FW V40.0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 68 New SIMATIC Software Controller 1508S T(F) Software Controller evolution with new hardware Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 69 SIMATIC Software Controller T(F) for high-end Motion Control Will be released based on TIA V20 in CY-2025 T • IPC BX-59A (i7) • High performance IPC with Intel Raptor Lake CPU • Platform designed for high modularity and flexibility • CP 1625-2 (PCIe) • PCIe card for PROFINET IO IRT • 2 IRT interfaces (4 ports) • Increased quantity structure • Software Controller V40.0: • Latest S7-1500 firmware (e.g. 64 Bit) • Increased number of (Extended) Motion Control ResourcesSIMATIC BX-59A with Intel core i7 13th generation SIMATIC CP1625-2 (PCIe card for PROFINET IO IRT) Software Controller CPU 1508S T/TF (V40.0) Motion Control Innovations FW V4.0 (TIA Portal V20) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 70 Motion Control – Innovations New Single Axis Operations Axis • Improved FB MC_Halt: New mode to halt only the basic movement. The superimposed movement is continued. • Change effectiveness of TO-DB tag “.Actor.RemoveEnableReaction” • Improved FBs MC_MoveAbsolute / MC_MoveRelative: Append movement without blending (step 1) Execution system / Acyclic tasks • Improvement of reaction time for acyclic tasks (e.g. MC_InterpolateCam) Page 71 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides t 0 v_B v_A v position_A position_B xx Motion Control – Innovations New Synchronous Operations Cams • New TO types TO Cam_6kSeg / TO Cam_600Seg with 6000 / 600 polynomial segments and 50 points • New TO-DB tags at TOs Cam_* for the following values at start and end of a cam • Improvement of FBs MC_GetCamFollowingValue(Cyclic): Select mode and read third derivative from a cam Synchronizing • Improvement of FB MC_CamIn: Direct synchronous setting at specified leading value position • Improvement of FB MC_GearInPos: Subsequent synchronization with specified MasterSyncDistance • New TO-DB tags at TO SynchronousAxis for the actual gear ratio numerator and denominator • Toleration of a leading value reversal during synchronization and desynchronization Cross-Project synchronous operation • Distributed synchronous operation between several CPUs programmed in different projects using new PN/PN-Coupler that synchronize two IRT domains and support isochronous data transfer between domains. Page 72 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Motion Control – Innovations Support of second PROFINET IRT Interface Page 73 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Interfaces in “Coupled” mode Interfaces in “Synchronized” mode SIMATIC S7-1516T / 1517 / 1518 MC_IPO MC_Servo X1 X2 SINAMICS SINAMICS 1 ms1 ms SIMATIC S7-1516T / 1517 / 1518 MC_IPO MC_Servo X1 X2 SIMATIC ET200MP / ET200SP SINAMICS 4 ms1 ms OB6x Motion Control – Innovations Cross-PLC synchronous operation using PN/PN Coupler Page 74 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Project A Project B SIMATIC S7-1516T / 1517T / 1518T MC_IPO MC_Servo X1 X2 SINAMICS SINAMICS 4 ms4 ms SIMATIC S7-1500T MC_IPO MC_Servo X1 2 ms PN/PN Coupler SINAMICS SyMSyM SyS SyS SyM = Sync master LA = Leading axis SyS = Sync slave FA = Following axis LA LAFA FA SyM Motion Control – Innovations Kinematics Kinematics • Conveyor Tracking: Individual dynamic reserve per OCS for dynamic adaption • New TO-DB tag StatusPath.DynamicLimit for motion commands • Accept negative length D1 at all Deltapicker 3D Interpreter • MCL Language Extensions • waitEvent() instruction supports expressions • New constant “NULL_POS” for circAbs() and circRel() instructions • Debugging of MCL programs • Breakpoint in Interpreter program editor • Toolbar extensions for debugging • Debug extensions in the basic online view • New Motion Control FBs • MC_InterruptProgram and MC_ContinueProgram Page 75 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Motion Control – Innovations Named value data types – tracing with PLC Trace Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Tracing Named Value Tags The trace recognizes NVTs directly in trace definition. Recorded values in the diagram are automatically resolved to NVT definition and displayed accordingly. Benefits • Automatic representation of tag names, instead of numerical representation • Tags can be used as trigger • Undefined states are also visible in diagram • NVTs are supported in all traces ((long-term) trace, (long-term) project trace) Page 76 TIA Portal V20 SINAMICS Startdrive & DCC Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 77 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. SINAMICS Startdrive & DCC – Innovations Highlight overview Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 78 New SINAMICS features + OPC UA server + EPOS extensions + Unit switching + System Component Trace and Trace at fault Safety Validation Assistant • Test Safety functions from sensor to actor on TIA Portal project level • Successor for Safety Activation Test SINAMICS DCC + Support of DCC for G220 + Indexing of publish PINs for G220 + Up to 250µs cycle time for G220 New engineering efficiency features + Export backup file + Trace templates + Drive parameter compare + Extended signal (BiCo) handling + Filter parameters + Synchronized parameter / function view + Improved topology error diagnosis + Openness extensions Highlights Startdrive & DCC V20 SINAMICS Startdrive Innovations Export backup file Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 79 Export backup file – new in V20 • Available for all drives as of V6.x • Uses Card Reader function of TIA Portal • “download” drive configuration directly to SD card or to local storage location on your PC for later reuse Same backup file format – doesn’t matter if it was created… ✓ via backup function of online drive configuration (Webserver / Startdrive) ✓ via export backup function of offline drive configuration (Startdrive) Can be restored… ✓ via Webserver / Startdrive restore function ✓ via SD card plugged to the drive Export backup file functionality is part of the SINAMICS Startdrive Advanced license. SINAMICS Startdrive Innovations Compare drives Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 80 Compare drives – new in V20 • Available for all drives as of V6.x and CU3x0-2 based drives • Comparison of single axis drives or drive objects of multi axes devices • “Compare” action creates snapshot of current values • Compare online or offline configurations • Filter for equal/unequal and r-/p-/c-parameters • Change parameter values directly within compare result • “Update view” for new filters or after parameter was changed by user (e.g. to make it equal) • Export compare result as .csv file or User-defined list (UDL – with or without values from target or reference object) SINAMICS Startdrive Innovations Unit switching Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 81 Unit switching SI/US units – new in V20 • Available for ✓ CU3x0-2 based drives ✓ G220 SINAMICS Startdrive Innovations NEW Safety Validation Assistant Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 82 Safety Activation Test on project level – NEW in V20 • Safety Activation Test was introduced in V17 to test and document the Safety control chain from sensor through PLC program to actuator. It had to be performed separately for each drive • NEW in V20: Test on project level • Advantage: Only one test case needed to check one Safety function for all devices in the project Safety Activation Test on project level is available with the newly introduced Engineering license Safety Validation Assistant. SINAMICS DCC Innovations Support of DCC for G220 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 83 SINAMICS Drive Control Chart (DCC) now available for G220 as of V6.4. • Support of indexed parameters • Up to 250µs cycle time for G220 • Additional block type available Note: For drives as of V6.x there is no DCC engineering license needed anymore for programming. DCC functionality will be licensed as Runtime licenses depending on number of blocks and used functionality. TIA Portal V20 TIA Cloud Services Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 84 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. TIA Cloud Services TIA Portal Cloud TIA Portal Cloud is an efficient SaaS offering, that enables you to work anywhere at any time! What is new? TIA Portal Cloud V5.0 (12/2024) • Integration of TIA Portal V20 • Keep TIA Portal V15.1 and V16 as legacy versions TIA Portal Cloud V4.6 (08/2024) • Extended hibernation support for your instances TIA Portal Cloud V4.3 (05/2024) • Improved WebUI with uniform navigation, clear selection and efficient use • Basic hibernation support TIA Portal Cloud V4.2 (03/2024) • Support of TIA Project-Server Cloud TIA Portal Cloud V4.1 (01/2024) • Authentication via Siemens ID • Updated instance toolbar design Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 85 TIA Portal Cloud V5.0 More information about TIA Portal Cloud is available at Industry Support page ID 109794456. TIA Cloud Services TIA Portal Cloud Connector The TIA Portal Cloud Connector enables full access to SIMATIC hardware, if the TIA Portal is located in a different subnet or in a cloud environment. Features ❖ Access to all online functionalities ❖ High-performant download to devices ❖ Secure connection via https ❖ Easy integration as Industrial Edge App ❖ Integrated access management for TIA Portal Cloud users More information and the setup of the latest version are available at Industry Support page ID 109780755. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 86 TIA Portal Cloud Connector V2.0 TIA Cloud Services TIA Project-Server Cloud Page 87 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Make your TIA Portal projects available in the cloud. Enables efficient team engineering of projects with the TIA Portal or TIA Portal Cloud - anywhere, anytime. For more information on TIA Project-Server Cloud, please follow the link: TIA Project-Server Cloud With the TIA Project-Server Cloud you have access to your TIA Portal projects and libraries from different locations for collaborative work across company boundaries. Benefit • Project storage and user management provided by the TIA Project-Server in the Industry Premium Portal. • Direct access to data storage from the TIA Portal, no time-consuming sending of data or coordination of changes. • Access from TIA Portal engineering stations as well as from the TIA Portal Cloud. • Dedicated resources for performance and data security. • Easy integration of suppliers, without opening the own IT structures. • Management of the Server and the TIA Portal projects via a comfortable web interface. Cooperative engineering for TIA Portal Projects and Libraries in the TIA Portal Cloud TIA Cloud Services Added values from TIA Project-Server Cloud Page 88 Availability Available from everywhere at any time • use with on-premise TIA Portal and TIA Portal cloud • Stable accessibility of the colocation center • High giga bit network bandwidth Reliability Guaranteed service level • Average annual availability of at least 99.9% • 24/7 monitoring service Efficiency Secure and fast environment • Dedicated server with own resources for each order • High level of data security with full control of the data Portability Zero IT effort and easy entry • no installation, maintenance or update effort • no hardware, no Windows server license needed Functionality Managed service • Server fully managed by Siemens • No shared virtual machines, each user gets their own virtual machine. • Virtual machines with the latest security patches ensures that system software and server services function properly Usability User experience • Simple administration via Web GUI • Same known experience for the users from TIA Portal point of view with seamless integration • Usability • Efficiency • Reliability • Availability • Portability • Functionality TIA Project- Server Cloud Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Use Case: Work together effortlessly, regardless of company boundaries. TIA Project-Server Cloud How to get access Different offerings for different demands Page 89 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides 365-day certificate 365-day certificate with 250GB project Memory. No auto-renewal. → As Certificate of Contract via Industry Mall: 6ES7804-0PP01-1YA8 10-hours certificate Non-self-extended 10-hours credit with 100 GB project memory. Interruptible can be combined into one credit period term (e.g. 4x10h = 40h). → As Certificate of License via Industry Mall: 6ES7804-0PP01-3YA8 (in preparation) 31-days certificate Non-self-extended 31-day certificate with 100GB project memory. → As Certificate of License via Industry Mall: 6ES7804-0PP01-2YA8 (in preparation) Annual subscription Self-renewing annual subscription with unlimited access and 250GB project storage. → As Certificate of Contract via Industry Mall: 6ES7804-0PP01-1YA0 Monthly subscription Self-renewing monthly subscription with unlimited access and 100GB project storage. → As Certificate of License via Industry Mall: 6ES7804-0PP01-2YA0 TIA Portal V20 SIMATIC Hardware Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 90 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. S7-1200 G2 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 91 S7-1200 G2 Overview Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 92 Seamless Scalability • Cost-optimized standard and fail-safe hardware portfolio • HW: ~25% space reduction • Fail-safe integrated • Memory expansion Flexible Machine Safety • Integrated in the complete range • Improved F-IO Portfolio with F- SBs and mixed I/O modules • Integrated in STEP 7 Basic Increased Performance • PROFINET: 31 devices with IRT • 8 High-Speed-Counter • Near Field Communication (NFC) and App Efficient Motion Control Kinematics, Multi Axis Control, and Single Axis Control Scalable, powerful portfolio for the basic automation segment 8/16ch SM 30mm 33% Less Din Rail S7-1200 G2 Overview Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 93 CPU 1212C CPU 1214C 8/16ch SM 70mm 22% Less Din Rail 80mm 27% – 38% Less Din Rail 30mm 33% Less Din Rail125mm New HW design Increased performance and seamless scalability Efficient motion control EM RAM Data RAM Program CPU 1212C 6 in total therein 3 CM/CP 500 k 150 k CPU 1212FC 500 k 200 k CPU 1214C 10 in total therein 3 CM/CP 750 k 250 k CPU 1214FC 750 k 300 k Expansion • Enhanced processing power, dedicated communication performance and more memory • Up to 31 PROFINET devices and synchronized program execution with PROFINET IRT • Near Field Communication (NFC) for commissioning and diagnostics support • Optimized scalable hardware portfolio and seamless scalability across all SIMATIC controllers Flexible Machine Safety • Fail-safe integrated in the complete range (PROFIsafe communication, I/Os) • Improved F-I/O portfolio (fail-safe signal boards, fail-safe signal modules with mixed I/Os) • Fail-safe & Motion Engineering integrated in TIA Portal Basic​ • Kinematics • Multi Axis control • Single Axis control Technology Objects Fail-safe SIMATIC S7-1200 (G2): No more separate Safety license from V20 onwards STEP 7 Safety Basic will be discontinued from V20 onwards Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides SIMATIC S7-1200 (G2) Hints • V18/V19 Safety Basic licenses will still be available • Future S7-1200 (G2) Hardware will use similar principles • SUS contracts for Safety Basic will be discontinued end of 2024 Until TIA Portal V19 Starting with TIA Portal V20 Hardware: S7-1200 F-CPU/F-DI/F-DQ Software: • STEP 7 V19 Basic (or Advanced) • STEP 7 V19 Safety Basic Hardware: S7-1200 (G2) F-CPU/F-DI/F-DQ Software: STEP 7 V20 Basic (or Advanced) SIMATIC S7-1200 Scalable automation solutions Scalable portfolio for standard and machine safety functions. Seamless system integration Seamlessly integrated in STEP 7 without need for separate license. Reduce license costs • Reduce entry costs • Especially customers requiring just few F-PLCs SIMATIC S7-1200 G2 Page 94 S7-1200 G2 Design and Handling Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Memory Card access, 2xPN Ports and improved signal board concept (up to two SBs). Removable high(er) density terminal blocks with push-in wiring for ease of use → non-contact pre-wiring position. DIN rail footprint reduced by ~ 25%. Single, reliable bus connection system for both SMs and CMs. -25% Page 95 S7-1200 G2 NFC function Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 96 Near Field Communication (NFC) • Gather Information without having to power the Device • Read/Write Application and Diagnostic Data (based on configuration) Is CPU Powered? Is NFC enabled in TIA Portal? Is CPU configured? Is CPU configured? Is NFC enabled in TIA Portal? Check hardware setting (of TIA Portal project) • Device Type • MLFB • HW • Serial Nr • Firmware • … • Device Type • MLFB • HW • Serial Nr • Firmware • … • Device Type • MLFB • Device Type • MLFB • HW • Serial Nr • Firmware Version • … NFC EEPROM and I2C are Disabled. No NFC Actions Possible No (Default) Yes Yes Yes No Yes Yes No (Default) Allow Read/Write • … No SIMATIC Controller S7-1500 standard & F Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 97 SIMATIC S7-1500 1517(F)/1518(F) CPUs New Hardware, Performance & Memory with FW V4.0 and TIA Portal V20 Program Memory (Mbyte) • 100% more program memory Data Memory (Mbyte) • 150% more data memory for 1518 CPU • 500% more data memory for 1517 CPU Security Integrated • Secure boot • User management and access control • Recording Security events (Syslog) • Protection functions • Secure communication • Certificate management Communication Performance • Up to 200% higher communication performance Interfaces • Two PROFINET IRT Interfaces (X1 & X2), each with two RJ45 Ports * • 512 RT or 64 IRT IO-Devices or 256 IRT IO-Devices with DFP via each interface * • G-Bit Interface (X3) for both CPUs Page 98 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Program Performance • More than 200% performance increase X 1 X 3 X 2 CPU 1517/ CPU 1518 *except H and HF CPUs SIMATIC Hardware New Hardware for S7-1500 1517(F)/1518(F) CPUs New mechanical design • The display is now integrated into the CPU like in the new 1515/1516 CPUs • Installation dimensions remain identical • RUN/STOP switch is replaced with RUN/STOP buttons • No more \"cancelling\" of the RUN/STOP switch • \"STOP ACTIVE\" indicates that the CPU was switched to STOP via the STOP button • Memory reset/Reset operation: Identical as before • Display can now be read – even when the cover is open • Mechanical manipulation protection is retained • New Display implementation • No separate Display FW needed Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 99 SIMATIC Hardware New Hardware for S7-1500 1517(F)/1518(F) CPUs +100% more program- and data memory 2 3 6 9 4 6 12 18 0 5 10 15 20 MByte 1517 1517F 1518 1518F +100% +100% +100% +100% FW V3.1 (current article no.) FW V4.0 (new article no.) 8 8 60 60 50 50 150 150 0 50 100 150 MByte 1517 1517F 1518 1518F +525% +525% +150% +150% Program memory Data memory • more resources for future customer application extensions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 100 SIMATIC Hardware New Hardware for S7-1500 1517(F)/1518(F) CPUs • Program performance increase up to +200% • Easier controller selection • More customer use cases can be realized • Retain Memory increase 1511/1513 1515/1516 1517 1518 +240% +140% +200% FW V3.1 (current article no.) FW V4.0 (new article no.) *** Boost Mode (<=50°C) Program performance 768 768 128 512 2.304 4.608 1511/1513 1515/1516 1517* 1518** 0 0 +200% +500% Retain memory in kByte * 50 MB with PS 60W 24/48/60V DC HF ** 100 MB with PS 60W 24/48/60V DC HF *** measured values Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 101 SIMATIC Hardware Additional performance boost for 1518(F, T, TF)-3 PN CPU Configuration in HW Config MountingUser Program performance Performance boost • 25% additional performance increase • At ≤ 50°C ambient temperature • Configurable in TIA Portal • Horizontal mounting only Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides 1518-4 PN/DP 1518-3 PN (60°C) 1518-3 PN (50°C) +200% +140% +25% ✓  Page 102 SIMATIC Hardware Communication performance of the new 1517(F)/1518(F) CPUs S7 & (secure) OUC communication performance • up to +80% performance increase OPC UA • Up to +200% performance increase Web-API (Read/Write) • Up to +200% performance increase S7 & OUC Com. OPC UA Web API +80% +200% +200% FW V3.0 (current article no.) FW V4.0 (new article no.) S7-Com. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 103 SIMATIC Hardware Usable IO-Devices with the new 1517(F)/1518(F) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Max. count of RT IO-Devices: 1024 (512 on X1 + 512 on X2) RT Device 513 RT Device 1024 … RT Device 1 RT Device 512 … X2X1 Max. count of IRT IO-Devices: 128 (64 on X1 + 64 on X2) IRT Device 65 IRT Device 128 … IRT Device 1 IRT Device 64 … X2X1 Max. count of IRT IO-Devices with DFP: 512 (256 on X1 + 256 on X2) DFP IRT Device 257 DFP IRT Device 512 … DFP IRT Device 1 DFP IRT Device 256 … X2X1 X1 X2 P1 P2 P1 P2 PROFINET IO-System 1 PROFINET IO-System 2 MRP-Ring 1 MRP-Ring 2 Page 104 SIMATIC Hardware Increase of quantity structure Max. number of blocks (DB+OB+FC+FB) • CPU 1517 from 12.000 → 20.000 • CPU 1518 from 20.000 → 40.000 • Better modularization of customer projects • Efficient use of increased program memory Max alarming instances loadable in RUN • CPU 1517/1518 from 10.000 to 20.000 • Higher number of alarms can be configured and loaded in RUN of the CPU Size of the Textlist Container (Mbyte) • CPU 1517/1518 from 7,5 (10*) to 50 Number of available Motion Control resources for technology objects • CPU 1517 from 10.240 → 20.480 • CPU 1518 from 10.240 → 30.720 • Higher amount of alarm messages in three languages can be loaded in the CPU • More axes can be controlled by the CPU with high performance • More complex motion applications can be realized * With FW V3.1 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 105 CPU 1518-3 PN SIMATIC Hardware Compatibility of CPU 1517(F)/1518(F) with new HW • FW V4.0 only for new article numbers • No PROFIBUS Interface on board, additional PROFINET Interfaces (Second RJ45 port for X2 and G-Bit X3) → No spare part compatibility • To connect PROFIBUS devices a CM 1542-5 or CP 1542-5 can be used • Fully functional compatible (except PROFIBUS DP). Step7 project can be used in the new CPU after “change device” in HW config. • Parallel delivery of the old and new HW for more as 1 Year: TIA Portal V20 > 1 Year Current HW / FW ≤ V3.1 New HW / FW V4.0 New HW FW V4.0 current HW FW ≤ V3.1 ╳ 6ES7 518-3AP10-0AB0 Standard CPU with display; work memory 18 MB code and 150 MB data; 0,3 ns bit operation time, 1st interface: PROFINET RT/IRT with 2 ports; 2nd interface: PROFINET RT/IRT with 2 ports; 3rd interface: Gigabit Ethernet; firmware V4.0 V4.0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 106 SIMATIC Hardware Spare parts compatibility S7-1500 (>= 1517(F)) – FW 4.0 with older TIA Portal versions TIA Portal V13 - TIA Portal V19 6ES751x-xyy10-0AB0 Firmware V4.0 V17/18/19 Project with 6ES751x-xyy00/1-0AB0 FW V2.9/3.0/3.1 V15/V15.1/V16 Project with 6ES751x-xyy00-0AB0 FW V2.5/V2.6/V2.8 V13/V13 SP1 Project with 6ES751x-xyy00-0AB0 FW V1.5 - FW V1.8 V13 SP1 UPD3/V14/V14 SP1 Project with 6ES751x-xyy00-0AB0 FW V1.8/V2.0/V2.1 6ES751x-xyy00/1-0AB0 Firmware V3.1 V20 Project with 6ES751x-xyy10-0AB0 FW V4.0 Full spare part compatible functionality beginning with TIA V13 up to TIA V19 New HW and functionality can be used with TIA Portal V20 and Firmware V4.0 TIA Portal V20 ╳ V20 Project with 6ES751x-xyy00/1-0AB0 FW V1.5 - V3.1 0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 107 SIMATIC Hardware S7-1500 1510SP(F) – 1513(F) CPUs – Performance increase with FW V4.0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides • TIA V18 and new HW for S7-1500 CPUs ≤ 1516: Increase of the performance with simultaneous reduction of performance levels from 6 to 2 • TIA V20 and new FW V4.0 : performance increase for S7-1500 CPUs ≤ 1513 • No new Article number (MLFB)! • Performance increase after FW update to V4.0 Bit performance in ns 25 25 25 25 6 6 66 6 6 6 6 6 6 1510SP 1511(C) 1512SP(C) 1513 1514SP 1515 1516 +317% FW V3.1 FW V4.0 • One Performance – Level for all S7-1500 CPUs ≤ 1516 • Positioning via memory, interfaces, quantity structure … Page 108 Redundant Controller S7-1500R/H Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 109 Scalable availability Single Mode for R-CPUs for easy upgrade from a Single- to a Redundant System Redundant Controller S7-1500R/H What’s new with Firmware Version 4.0 Hardware Update for H-CPUs Increased Performance / More Memory / Additional Interface for CPU 1517H / Integrated Display Single Redundant Avoid communication loss Move System-IP address to Backup PLC in case of network interrupt to Primary Controller System IP BP Extended retentive data Support of HF System Power Supply allows extension of retentive memory of R/H CPUs Additional standard features Missing features of standard CPUs can now also be used on R/H controller: • Profiling • Additional System Functions • Extension of Web-API Feature A Feature B Feature C Feature D Feature A Feature B Feature C Feature D Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 110 SIMATIC ET 200SP Open Controller 3 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 111 The new SIMATIC ET 200SP Open Controller 3 (OC3) - the new features at a glance! Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 112 Bundles with WinCC Unified together with Software Controller (F) USB 3.2 Interfaces for faster transfer rates Additional IE/PN-RT interface can be assigned to OS or Software Controller (F/T/TF) Wider temperature range enables new areas of application: -30°C..60°C Higher Performance for Windows/Industrial OS and Software Controller (F/T/TF) SIMATIC Industrial Edge together with Software Controller (F) Intel® Atom x6416RE, 1,7 GHz, 4 Cores, 8 GB RAM ET 200SP Open Controller 3 – Open for your applications! Configurable with TIA Portal V20. Release planned for Q2/2025. SIMATIC ET 200SP Open Controller 3 (OC3) Variants Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides With TIA V20 Planned Q2-2025 Software Controller CPU 1505SP (V40.0) Open Controller 3 variants General Purpose Operating Systems WinCC Unified Bundle Version – Windows LTSC 2021 CPU 1515SP PC3 CPU 1515SP PC3 F CPU 1515SP PC3 T CPU 1515SP PC3 TF Bundle Version – Industrial OS V4.x CPU 1515SP PC3 - IndOS CPU 1515SP PC3 F - IndOS Bundle Version - Industrial Edge CPU 1515SP PC3 - IndEdge CPU 1515SP PC3 F - IndEdge Page 113 Bundle Version – Windows LTSC 2021 CPU 1515SP PC3 + WinCC Unified PC RT CPU 1515SP PC3 F + WinCC Unified PC RT CPU 1515SP PC2 (OC2) CPU 1515SP PC3 (OC3) Processor Intel Atom® E3940, 1,6 GHz, 4 Cores Intel Atom® x6416RE, 1,7 GHz, 4 Cores Mass storage 128 GB CFast Card (changeable) 128 GB SSD (changeable) Working Memory 8 Gigabyte RAM 8 Gigabyte RAM Graphic interface 1x DisplayPort DPP 1x DisplayPort DPP USB interfaces 2x USB 3.0; 2x USB 2.0 3x USB 3.2 (type A) PN-Interfaces for Software-Controller (RT/IRT) 1x SIMATIC BusAdapter; 2 Ports (RJ45, SCRJ, LC) 1x SIMATIC BusAdapter; 2 Ports (RJ45, SCRJ, LC, LD-LC*) IE-Interfaces for OS 1x 1000 Mbps Ethernet interface 1x 2500 Mbps Ethernet interface Interfaces configurable for OS or Software-Controller - 1 x Ethernet-Interface RJ45 (Gbit for OS, PN-RT support for Software-Controller) Central SP Bus for usage of ET 200SP I/O modules directly with Software- Controller Pre-installed operating system Windows 10 Enterprise IoT 2021 LTSC Industrial OS V3.x Windows 10 Enterprise IoT 2021 LTSC Industrial OS V4.x Industrial Edge Available S7-1500 Software-Controller (pre-installed) Windows: Standard/F/T/TF; Industrial OS: Standard/F Windows: Standard/F/T/TF; Industrial OS: Standard/F Industrial Edge: Standard/F Ambient temperature during operation -20°C … 55°C / 60°C with restrictions -30 .. 60°C Dimensions (w/h/d) 160/117/75 160/117/75 SIMATIC ET 200SP Open Controller 3 (OC3) Comparison with OC2 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 114 *LD-LC: Support via later firmware update SIMATIC ET 200SP Open Controller 3 (OC3) performance and quantity structures Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 115 2 33 4,5 Standard F/T/TF +50% +50% Program Memory (MB) 120 300 T / TF +150% Extended Motion Control Resources 7,5 10 all types +33% Data Memory (MB) all types +150%Motion Control Resources 2.400 6.000 179 425 304 709 0 200 400 600 800 Singlecore Multicore Geekbench OC2 OC3 167 296 0 100 200 300 400 MotionMark V1.3.1 OC2 (45fps) OC3 (60fps) Benchmarks (executed under Microsoft Windows 10 IoT Enterprise LTSC 2021) Quantity structures of the Software Controller (F/T/TF) Test Focus Geekbench generic Benchmark MotionMark V1.3.1 measures a browser’s capability to animate complex scenes at a target frame rate → WinCC Unified relevant Note: At the time of creation (10/2024), no measured values were available for the Software Controller on OC3 SIMATIC S7-1500V Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 116 SIEMENS Industrial (virtual) Edge Docker Virtual S7-1500 PLC Industrial Realtime Linux SIMATIC S7-1500V Virtual controller Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 117 Edge App The basic idea … we bring SIMATIC on the Industrial Edge! Highlights TIA V20 • Release of Version 2.0 • Failsafe Support for vPLC • AX - “IT Like” Engineering • Improved communication • Licensing SIEMENS Industrial (virtual) Edge Docker Virtual S7-1500 PLC S7-1500 PLC Software Stack Industrial Realtime Linux Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides S7-1500 PLC Edge App S7-1500V F Virtual SIMATIC PLC S7-1500 PLC Software Stack SIMATIC S7-1500V F Safety Virtual controller Page 118 The basic idea … we bring SIMATIC on the Industrial Edge! • Virtual Failsafe SIMATIC S7-1500 PLC • Hardware independence • TIA Portal compatible • App Management over IT/Edge Time Service App assigned Network card SIMATIC S7-1500V Big picture virtual Edge Device Failsafe Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 119 Industrial Edge – Virtual Device (IEVD) Optional other VMs … VMWare ESXi / other Hypervisor solutions Generic Hardware CPU 1517V F Time Service App Failsafe requires Time redundancy • 2nd independent Timer, distributed via Time Service App • Utilizing PTP from Network Infrastructure • Time Service-App is using at least one NIC / PN-Interface (For Maintenance more than one PN-Interface configurable) • Time Service-App is providing the 2nd Timer to various F-vPLC HMI App Other Edge Apps S7-Web Server Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 120 S7-Web Server – Development of Custom Web Pages New state of the art technology (JSON Web API) replace AWP Unrestricted | © Siemens 2024 | TIA Portal V20 Technical slides121 Creation of HTML page in a standard Editor Configuration of “WWW-SFC99” command in OB1 and symbolic name DB in STEP7 / TIA Open Web page via a Web browserJSON based Webpage Compile and download code to the PLC IMPROVEMENTS ✓ Fast & easy creation of Web Pages using JSON Web API ✓ Reduction of development complexity • No longer use of \"WWW\" (SFC99) and System DBs for storage • No need to compile and download code to the PLC (STOP-RUN) • Complete independence from web development and PLC Logic ✓ Web pages editing and testing without process interruption ✓ Access to more data types and parameters of the PLC than only process variables ✓ Higher S7-CPU performance due to lower memory consumption and communication load ✓ Faster Web browser response time due to improved caching ✓ Embed PLC Web Pages in an HTML Frames with new Trusted Client (e.g. in WinCC Unified Screens) ✓ Secure encrypted communication via “https://”NOT NEEDED ANY LONGER NEW JSON Web API vs old AWP S7-1500 FW V4.0 S7-1200 G2 FW V1.0 ET 200SP V4.0 Virtual Controller V2.0 Software Controller V40.0 Page 122 NEW Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Support of trusted client methods for Unified Panels Support of Local and Central User Management (UMC) Client-side password change capability Faster Web page loading and reduction in communication load S7-Web Server – New Standard System Web Pages Modern System Web Pages based on HTML5 / JSON Web API Interoperability with custom Web pages for consistent session handling, time, language, and theme definition Context sensitive options for download, rename, move, or delete files User friendly alarms control and diagnostic buffer viewer Easy access to Data Logs, User Files and Recipes HTML5 File Browser and tree view for an easy navigation through folders Status Information on every page (e.g. alarms) Support for S7 Product Family: ET 200SP V4.0, Virtual Controller V2.0 Software Controller V40.0, S7-1500 FW V4.0 (Except R/H) Light or Dark Theme S7-Web Server – Development of IT Applications using JSON Web API Access to a wide range of OT informationJSON Web API Edge / IT Tablet or smart Phone Laptop Web Clients Web Servers S7-1500 FW V4.0 S7-1200 G2 FW V1.0 ET 200SP V4.0 Virtual Controller V2.0 Software Controller V40.0 Standard lightweight data-interchange format, easy to read and write, supported by many standard programming languages (Phyton, C++, JavaScript, HTML) Support of security mechanisms like encrypted communication • Trusted client configuration • Password change OT / IT Link access via JSON-RPC Web API Secure OT / IT Communication Access to a wide range of OT information Access to the complete JSON Web API library on the S7-CPU • User program (reading & writing of process data, profiling, data logs) • Diagnostic information (alarms, diagnostic buffer, syslog) • Monitoring of safety status, parameter and runtime groups • Maintenance (File Management) Support of commissioning activities without need of using TIA • Monitoring and change of operating mode • Backup and restore Commissioning Support via Scripts NEW Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides123 Safety Integrated Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 124 SIMATIC F-IOs Page 125 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides ET 200SP ET 200MP • F-DI 8x24VDC HF • New Firmware V3.0 – only with new FS • Compatible successor • New Feature 1x24V Counter SIL3 • Standstill monitoring • Overspeed detection • Counting up and down • 500Hz counting frequence • 32bit signed value - +/- 2 000 000 000 • High counting limit, low counting limit and start value are parameterizable • Planned release: Q1/2025 with HSP for V20 • F-AI 8x 0(4)..20mA HF • New Firmware V2.0 – only with new FS • New Feature: • HART communication support acc. Rev 5 up to 7 for HART field devices • Support MSI • Planned release: Q3/2024 with HSP for V19 • F-DQ 4x24VDC/2A PM HF • New article number: 6ES7136-6DB01-0CA0 • Compatible successor • Reduction of power consumption up to 50% • Less self operation temperature • New function LVV acc. EN 54 • Planned release: Q1/2025 with HSP for V20 ET 200ecoPN M12-L Fail-safe F-DI 4x/F-DQ 2x/DIQ 4x/IO-Link Class B 4x F-DI channels, 2x F-DQ channels, 4x DIQ channel, 1x IO-Link Class B port • Separate sensor supply for each F-DI channel, allows parallel use of electronic and electro mechanical sensors. Support of safety mats. • Each F-DQ channels (2A) with additional Us: 1L+ and 1M as power power supply for ,e.g. ET 200AL. F-DQ channels operates as 2L+/2M for safety shutdown (SIL2) of ET 200AL outputs. • 4x DIQ standard channels, that can be assigned individually as DI or DQ (0.5-2A) • 1x IO-Link Class B port, incl. safety shutdown of 2L+/2M (2A) (SIL2) on pin 2 and 5 for , e.g., valve islands. Note: Pin 2 and 5, can be used as third F-DQ in SIL3/PLe quality as well. • Embedded E-Stop and Enabling functions, assignable in HW configuration of TIA Portal. • Market Entry Q1 2025 / TIA V20 HSP Page 126 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Fail-safe SIMATIC S7-1200 (G2): No more separate Safety license from V20 onwards STEP 7 Safety Basic will be discontinued from V20 onwards Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides SIMATIC S7-1200 (G2) Hints • V18/V19 Safety Basic licenses will still be available • Future S7-1200 (G2) Hardware will use similar principles • SUS contracts for Safety Basic will be discontinued end of 2024 Until TIA Portal V19 Starting with TIA Portal V20 Hardware: S7-1200 F-CPU/F-DI/F-DQ Software: • STEP 7 V19 Basic (or Advanced) • STEP 7 V19 Safety Basic Hardware: S7-1200 (G2) F-CPU/F-DI/F-DQ Software: STEP 7 V20 Basic (or Advanced) SIMATIC S7-1200 Scalable automation solutions Scalable portfolio for standard and machine safety functions. Seamless system integration Seamlessly integrated in STEP 7 without need for separate license. Reduce license costs • Reduce entry costs • Especially customers requiring just few F-PLCs SIMATIC S7-1200 G2 Page 127 8/16ch SM 30mm 33% Less Din Rail Overview Higher competence Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 128 CPU 1212C CPU 1214C 8/16ch SM 70mm 22% Less Din Rail 80mm 27% – 38% Less Din Rail 30mm 33% Less Din Rail125mm New HW design Increased performance and seamless scalability Efficient motion control EM RAM Data RAM Program CPU 1212C 6 in total therein 3 CM/CP 500 k 150 k CPU 1212FC 500 k 200 k CPU 1214C 10 in total therein 3 CM/CP 750 k 250 k CPU 1214FC 750 k 300 k Expansion • Enhanced processing power, dedicated communication performance and more memory • Up to 31 PROFINET devices and synchronized program execution with PROFINET IRT • Near Field Communication (NFC) for commissioning and diagnostics support • Optimized scalable hardware portfolio and seamless scalability across all SIMATIC controllers Flexible Machine Safety • Fail-safe integrated in the complete range (PROFIsafe communication, I/Os) • Improved F-I/O portfolio (fail-safe signal boards, fail-safe signal modules with mixed I/Os) • Fail-safe & Motion Engineering integrated in TIA Portal Basic​ • Kinematics • Multi Axis control • Single Axis control Technology Objects Overview Fail-safe: signal boards and signal modules Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 129 SBs SMs 4x F-DI(1oo1) / 2x F-DI(1oo2), 4-Vs* 8x F-DI(1oo1) / 4x F-DI(1oo2), 8-Vs* 2x F-DQ, PP-PM* 4x F-DQ, PP-PM* 2x F-DI(1oo1) / 1x F-DI (1oo2), 1x F-DQ. PP-PM* 4x F-DI(1oo1) / 2x F-DI (1oo2), 2x F-DQ. PP-PM, 2x DI 1oo1 (One out of One): 1oo1 as simple redundancy, a single input connected to a fail-safe digital input 1oo2 (One out of Two): Redundancy with cross-diagnosis: There are two independent sensors, each connected to an F-DI. Both sensors provide signals to the F-DI. The F-DI monitors the signals and makes decisions based on both inputs. This configuration is normally used in safety-critical applications Vs: Integrated Sensor supply, allows to detect short-circuit or overload scenarios, and react accordingly *Not within initial failsafe Portfolio release TIA Portal V20 System functions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 130 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. Upgrading TIA Portal projects Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 131 Upgrading TIA Portal projects Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal V20TIA Portal > V13TIA Portal V13 SP1/SP2 V13 SP1 project Project upgrade to V20 Project upgrade to V13 SP1 ≤ V13 project V20 project> V13 project Side-by-side installation of V13 SP1/SP2 up to V20 allows access to all project versions. The V20 license can be used for all available versions from V11. Page 132 Upgrading TIA Portal projects Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Project Upgrader based on TIA Portal Openness • Upgrade multiple TIA Portal projects from previous versions (> V13) to the current TIA Portal version at once • Fully automate the upgrade process • Options to automatically upgrade hardware and firmware • Options to automatically compile project and to start SiVArc generation after upgrade • Generate Safety documentation (Safety printout) Free download at SiePortal: 109811744 Page 133 Enhanced PROFINET IRT features (for advanced motion control) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 134 Multi project motion applications to create modular machine units Even more devices/axis with secondary PROFINET IRT Interface Increased amount of devices/axis with Dynamic Frame Packing (DFP) TIA Portal V20 - Enhanced PROFINET IRT features for advanced motion control Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 135 … … … … Data is sent in summation frames Resulting in up to 256 DFP IRT devices per interface *: simplified illustrations Doubled PROFINET IRT quantity structure (512 DFP IRT devices) Interface clocks can be synced or coupled … … … … … … … … … … … … … Independent configuration of multiple machine parts Coupling of IRT clock with PN/PN Couplers across multiple projects These three features enable limitless quantity structures in PROFINET IRT PN/PN Coupler PN/PN Coupler TIA Portal V20 - Enhanced PROFINET IRT features for advanced motion control Increased amount of devices/axis with Dynamic Frame Packing (DFP) Features PROFINET Dynamic Frame Packing (DFP) can now also be used for high quantity structure applications with low cycle times Benefits The maximum amount of PROFINET IRT devices increases from 64 to 256 (per PN IRT interface) Target markets Machines with high performance motion tasks Supported hardware • SIMATIC S7-1500 CPU 1517-3 PN, CPU 1518-3 PN, CPU 1517F-3 PN, CPU 1518F-3 PN CPU 1516T-3 PN, CPU 1517T-3 PN, CPU 1518T-3 PN CPU 1516TF-3 PN, CPU 1517TF-3 PN, CPU 1518TF-3 PN Software Controllers + CP 1625 • SIMATIC ET 200SP HS • SINAMICS G220, S200, S210 • Several third-party PROFINET IRT devices Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 136 … … … … … … … … … … … … PROFINET IRT Switch PROFINET IRT Switch *: simplified illustrations TIA Portal V20 - Enhanced PROFINET IRT features for advanced motion control Even more devices/axis with secondary PROFINET IRT Interface Features A secondary PROFINET IRT Interface doubles the PLCs capabilities Benefits The maximum amount of PROFINET IRT devices increases from 64 to 128 (with only DFP device up to 512) The PLC can operate two PROFINET IRT systems with synchronized or coupled bus cycles Target markets • Machines with high performance motion tasks • Machines which require multiple bus cycles (e.g. out of efficiency or device capability reasons) Supported controllers • SIMATIC S7-1500 CPU 1517-3 PN, CPU 1518-3 PN, CPU 1517F-3 PN, CPU 1518F-3 PN CPU 1516T-3 PN, CPU 1517T-3 PN, CPU 1518T-3 PN CPU 1516TF-3 PN, CPU 1517TF-3 PN, CPU 1518TF-3 PN Software Controllers + CP 1625-2 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 137 *: simplified illustrations Synced OB6x OB6x 4ms 1ms Coupled OB6x 1ms TIA Portal V20 - Enhanced PROFINET IRT features for advanced motion control Multi project motion applications to create modular machine units Features Clock synchronization across multiple TIA Portal projects by use of PN/PN Couplers Benefits Independently engineer machine units by multiple OEMs Increase quantity structure with multi controller applications Target markets • Machines with high performance motion tasks • Machines with independently engineered units Supported hardware • System Integrator: PN/PN Coupler with FW V6.0 and TIA V20 (6ES7 158-3AD10-0XA0) • OEM: Any PN IRT Controller with any TIA Portal version Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 138 … … … … … … … System Integrator OEM1 OEM2 OEM3 *: simplified illustrations PN/PN Coupler PN/PN Coupler PN/PN CouplerTIA Portal Documentation Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 139 TIA Portal Documentation (Online view) Everything you want to know about V20 - and more! The web-hosted TIA Documentation Portal provides central access to information on Totally Integrated Automation: • Software documentation • Hardware documentation • Additional video tutorials, user guides, application examples, and other resources to learn more about the TIA Portal. Easy to find – Easy to use • Accessible without TIA Portal installation on your PC. • High-performance search allows you to find topics in just a few moments. • Content can easily be shared using URLs Start the TIA documentation portal here - and remember to set a bookmark in your browser: docs.tia.siemens.cloud Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 140 TIA Portal Documentation (Offline view) TIA Portal information system Users who want to work offline with the locally installed TIA Portal information system, can continue to do so. They will benefit from an innovated design of the offline information system Modern design and improved navigation The web view offers modern functionality, such as: • Modern web design • Modern search function and filters • Bookmarks and tab handling in the web browser Switch between web view and legacy view Switch between the new offline view and the legacy offline view with the setting: “Tools > Settings > General > Information System” Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 141 Setting TIA Portal Openness Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 142 TIA Portal Openness Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Openness is our API for automating your engineering workflows Highlighted API innovations in TIA Portal Openness V20: • Long-term support and compatibility • APIs for Continuous Integration support such as new document-based formats for import/export, library type management/creation, Multiuser workflows and Continuous Testing (option package Test Suite Advanced) • Extended access to hardware configuration and module parameters • Innovations in additional option packages: SiVArc, SINAMICS Startdrive, SINAMICS DCC and WinCC Unified For a list of all new features, refer to the TIA Portal Openness system manual, chapter “What’s new”. SiePortal: 109792902 Page 143 Openness application based on V17 Openness application based on V17 TIA Portal Openness Long-term support and compatibility Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Openness application based on V16 Openness application based on V16 TIA Portal V20V20 APIV19 APIV18 APIV17 API TIA Portal V19V19 APIV18 APIV17 APIV16 API TIA Portal V18V18 APIV17 APIV16 APIV15.1 API Openness application based on V20 TIA Portal V17V17 APIV16 APIV16.1 APIV15 API Update of application necessary Long-term support applications Page 144 TIA Portal V16V16 APIV15.1 APIV15 APIV14 SP1 API Existing New/Extended in V20 Long-term support (LTS) • Existing Openness applications since V17 will continue working. • TIA Portal V20 delivers the LTS APIs for V17, V18 and V19. New API version • TIA Portal V20 delivers the new API version V20 to use the latest Openness features. Discontinuation of oldest API version • TIA Portal V20 no longer delivers the oldest API version V16. • An update of applications using this version is necessary. SimaticML file format compatibility • New stable ordering of multilingual texts in SimaticML for comparing/versioning use-cases. • Each API version in TIA Portal V20 creates SimaticML files of engineering version V20. • Each API version in TIA Portal V20 supports importing SimaticML files from engineering versions V17, V18, V19 and V20. .NET SDK version • TIA Portal and TIA Portal Openness rely on .NET Framework 4.8 as a mature software framework as part of the operating system to build long-running enterprise-grade industrial-suited applications complying the needed long-term support. TIA Portal Openness New general features Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides General • Find device items faster by classification, name or position number • Multiple ways for different use-cases for fast navigation through the hardware • Get all attributes of any object faster by access option • No need to first call GetAttributeInfos() and/or to iterate through individual attributes • Unique object identifiers for objects in a project • Supported by these classes: Device, DeviceItem, PlcUnit, PlcSafetyUnit, PlcBlock, PlcType, TechnologicalInstanceDB, PlcTagTable, PlcTag, PlcUserConstant, PlcSystemConstant • The unique identifier is stable within the same project • No need to recursively scan the full project tree twice • Use the unique identifier to find the same object again when reopening a project at a later point of time • Use the unique identifier to hand over and find objects across process boundaries, e.g. between Openness applications and Add-Ins Page 145 // Get the identifier of an object: PlcBlock currentPlcBlock = ...; ObjectIdentifierProvider objectIdentifier = project.GetService(); string identifier = objectIdentifier.GetIdentifier(currentPlcBlock); // Find the same object later again: string identifier = \"w1WdYM/ppEi6iPW1sFJmHQ==\"; ObjectIdentifierProvider objectIdentifier = project.GetService(); PlcBlock foundPlcBlock = objectIdentifier.Find(identifier) as PlcBlock; // Get name and value of all attributes with Read & Write access: IReadOnlyList> attributes = plc.GetAttributes(AttributeAccessOptions.ReadWrite); Device stationDevice = project.Devices.Find(\"S7-1500R/H system_1\"); // Find all PLCs of a nesting level by classification (CPU) IList plcs = stationDevice.DeviceItems.Find(DeviceItemClassifications.CPU); // Find second PLC by name (Rail_1, PLC_2) DeviceItem plcByName = stationDevice.Items.Find(\"Rail_1\").Items.Find(\"PLC_2\"); // Find first PLC by position number (Rack 0, Slot 1) DeviceItem plcByPosition = stationDevice.Items.Find(0).Items.Find(1); Additional parameters support Read and write hardware parameters* for additional module families for automated hardware configuration or checks: • ET 200pro TM • ET 200clean • SCALANCE XC-200 (>= V.4.2), XP-200 (>= V4.3), SC-600 (>= V2.3), S615 (>= V7.1), XM-400 (>= V6.2) Parameters* support for the following module families is already provided with previous TIA Portal versions: • GSDML devices (generic approach for all) • S7-1500 PLC (Standard + Safety) • ET 200MP (Standard + Safety, except communication modules) • ET 200SP (Standard + Safety) • ET 200AL (Standard + Safety) • ET 200pro (Standard + Safety) • ET 200eco PN (Standard + Safety) • Push Buttons • HMI Extension Units (Standard) • SCALANCE XC-200 / XP-200 (≥ V4.3), SC-600 (≥ V2.3) TIA Portal Openness Extended access to hardware devices Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Openness Read and write module and channel parameters Configure and check hardware configuration automaticallyET 200SPET 200proET 200eco PNET 200MPPush ButtonsHMI Extension UnitsS7-1500 PLCET 200AL *The detailed list of supported modules, channels and parameters is part of the system manual (appendix) and next to the API: C:\\Program Files\\Siemens\\Automation\\Portal V20\\PublicAPI\\V20\\HW Parameter description\\SCALANCEGSDML devices Page 146 Existing New/Extended in V20ET 200clean TIA Portal Openness Extended access to hardware configuration & networks and security settings Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides PLC configuration • New PLC access control configuration for central user management (UMAC) • New PLC account locking at runtime (UMAC) • New system web pages configuration for web server • New advanced multilingual support configuration for project texts being downloaded to PLC • Download View of Things (VoT) applications to PLC Module configuration • Uniformed port label without whitespace • Read PROFINET (sub)slot number attribute of modules • MRP ring configuration for SCALANCE • Import/export Telecontrol configuration (CP IRC / TIM IRC) Security & UMAC • New syslog server configuration on project level • Create and manage device function rights, UMC users and user groups Page 147 TIA Portal Openness New APIs for PLC user program generation and Continuous Integration support Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal libraries • Get all information from libraries, types and versions • Create new library types and versions from files • Export library type versions as files • Set into edit mode, release and discard library type versions • Handle conflicts when inserting library type versions or master copies into project PLC user programs • New text-based file exchange format for PLC blocks for programming language LAD and Safety-LAD: Easy external text-based editing and comparison • Browse PLC documents (e.g. named value types) • Export and import PLC blocks, technology objects, PLC types and PLC documents in new SIMATIC documents • Rename PLC tags and PLC tag tables • Read checksums of PLC software and text lists Multiuser engineering • Mark and unmark objects via marking service • Access groups for server projects on TIA Project-Server Page 148 New SIMATIC documents formatProject library and Global library featuresPLC user program and Multiuser features Test Suite Advanced Programming style checks, application tests and system tests can be automatically created, configured, and executed periodically and reports created for Standard PLCs and Safety PLCs via TIA Portal Openness. For automated project verification • Extended TIA Portal Openness support for configuration of system test cases. • New application test sets configuration and execution. Continuous Testing & Integration Rapid program changes require Continuous Testing. This is one essential part of Continuous Integration. Benefits of Continuous Testing and Continuous Integration: • Accelerate the development process • Lower risk of faults • Increase transparency of processes • Save time through automated processes TIA Portal Openness New API features in additional option packages: Test Suite Advanced Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Automated Build and Test via TIA Portal Openness Page 149 TIA Portal Openness New API features in additional option packages Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides WinCC Unified TIA Portal Openness innovations: • Configure further dynamizations, expressions for dynamizations • Configure further HMI runtime settings • Support DB name multiplexing on HMI tags • Support central color palette • Import/Export of text lists (without formatted text) Page 150 SINAMICS Startdrive / DCC TIA Portal Openness innovations: • Activate/Deactivate “functions in use” for 3rd generation drives (EPOS / PID) • Read all parameters on drives • Get telegram size in bytes • Get drive object number • Support Edge telegram SIMATIC Visualization Architect TIA Portal Openness innovations: • Advanced tags rules • SiVArc expression resolver TIA Portal Add-Ins Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 151 TIA Portal Add-Ins Language-aware Add-Ins Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal User interface language-aware Add-Ins • Add-In authors can create multilingual Add-Ins which follow the TIA Portal User interface language. • Multilanguage texts can be provided for a context menu entry of an Add-In, Add-In UI and for feedback messages logged from Add-In to TIA Portal output view. • If the TIA Portal language is changed after activation of the Add-In, then the Add-In needs to be reactivated to adapt to this new language. Page 152 TIA Portal Add-Ins Icon support for Add-Ins Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Icon support for context menu Add-Ins • Add-In authors can show their own custom icons for context menu entries of Add-Ins. • Icons can be shown for all kinds of context menu entries except checkbox and radio button style context menus. • This enables users with clear and faster recognition of menu entries. It enhances the user experience of Add-Ins, aligning it with TIA Portal UI standards. Page 153 Performance Improvement in Add-Ins • Improved performance of context menu Add-In display, no display timeout issues. • Add-Ins are stateful from V20 onwards. Version Control Interface (VCI) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 154 Version Control Interface (VCI) HMI Global Script Modules available in VCI Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Export/Import of HMI Global Script Modules through VCI • Possible to export and import HMI Global Script Modules using VCI. • User can now export/import JavaScript files via VCI, thus allowing better mergeability and easy exchange with source control. • HMI Global Script Modules exports as multiple documents, thus allowing clear segregation of master module file and individual JavaScript files. • User can source control HMI Global Script Modules through VCI. Page 155 CAx: AutomationML & Publication Tools Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 156 CAx AutomationML data exchange in TIA Portal V20 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal CAx • The CAx interface provides you with the option of exchanging hardware information in AutomationML format between TIA Portal and ECAD systems in accordance with the Application Recommendation Automation Project Configuration (AR APC) standard. • In addition to exchanging devices, modules and networks, selected parameters can also be exchanged with ECAD systems. • The definitions of the available parameters can be easily determined using the CAx Publication Tools and can then be imported into other tools. Innovations in V20 • CAx Import supports automatic opening of referred global libraries if the AutomationML file contains library references which are in ‘preview’ state in TIA Portal. • Import of AutomationML files containing library references which are created from modules connected to master controller is supported with some limitations. • For communication objects (interfaces, ports), the exchange of multilingual comment attributes is available using AutomationML. • Support for CAx Add-In template is available which allows the users to create their own Add-Ins to perform custom actions during CAx Export/Import. Benefits • Consistent data exchange for hardware configuration across systems, e.g. from TIA Selection Tool to EPLAN Electric P8 to TIA Portal • Extended reuse of hardware configuration created outside TIA Portal • Optional exchange of module and channel parameters by enabling “custom attributes” Page 157 CAx TIA Portal CAx Publication Tools V3.0 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal CAx Publication Tools • ​The ​GSD(ML) Publication Tool​ can be used via GUI or Command Line to open device description files, display the device data they contain and select device attributes. These attributes can be exported with the tool as metadata. • The ​Hardware Publication Tool​ can be used via GUI or Command Line to open TIA Portal projects, display the module data they contain and select module attributes. Module and channel attributes can be selected separately. These attributes can be exported with the tool as metadata. Innovations in Version 3.0 • The exchangeable attributes can be determined for modules that are described using GSD or GSDX and made available for partner systems such as ECAD systems. • An option to filter possible values for hardware parameters is available (preview feature) Benefits • Easy retrieval of available custom attributes via CAx Publication Tools • Reuse the definition of available hardware parameter data for • EPLAN master data base (for custom attributes in EPLAN macros) • Openness applications (e.g. hardware project generators) • further more tools using the “Neutral” or “PcPm” formats Order details • The tools are part of the TIA Portal V20 installation and require an own license: • Version 3.0: 6ES7823-1JE03-0EA5 • Upgrade to version V3.0: 6ES7823-1JE03-0EE5 • Software Update Service (SUS): 6ES7823-1JE03-0EL5 Page 158 User Management & Access Control (UMAC) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 159 System functions User Management & Access Control (UMAC) At the import dialog for central users and groups a filter header is added. → This helps finding specific users and groups much faster. In the table header of runtime rights, the sort order can be defined as ascending or descending. → Sorting the list of function rights increase clearness when choosing the required entries. Rename of to and to . → Consistent user terminology with UMC and UMAC supported devices. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides The TIA Portal project offers integrated user administration and access protection. For consistent access protection, user roles can be configured with function rights for engineering and runtime. Users and user groups can also be managed centrally by connecting TIA Portal to a UMC domain. Adapted user type terminologyNewSort runtime function rightsNewFilter central users and groupsNew Page 160 #1 CREATE System functions User Management & Access Control (UMAC) Configure UMAC without UMC connection Use case • Create and manage UMC users and groups without the need to connect to a UMC domain. Feature workflow 1. creates now by default a local user. 2. Now able to change user type from local user to central user (offline). 3. Configure access control by assigning roles for this user. 4. [Move project to place of use] 5. Use the UMC synchronize function to merge central users and groups in the TIA Portal project with the connected UMC domain. 6. Users and groups that are not available in the UMC domain stay in the TIA Portal project as disabled users. Benefit • Able to completely preconfigure TIA Portal projects and the UMAC configuration without a connection to a UMC domain server. This reduces the integration and commissioning effort dramatically. Page 161 Project A Factory UMC domain server move Project A* OFFLINE Central Users & Groups (offline) #2 INTEGRATE Central Users & Groups (synchronized) Configure UMAC Synchronize with UMC Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides New UMAC for SIMATIC PLCs for S7-1200 / S7-1200 G2 CPUs Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Flexible access control for multiple users, based on individual rights with unified user management: • Unique user accounts with individual access rights for suitable access configuration according to user's tasks • Single user account usable for different PLC services (e.g. engineering access, Webserver, OPC UA access) • Roles / Rights concept for different PLC functionality integrated into existing TIA Portal UMAC configuration • System defined PLC roles for easy configuration • Improved security wizard for quick UMAC setup TIA Portal OPC ClientWeb browser PLC Roles / Rights Local Userslogin Page 162 Central UMAC support for SIMATIC PLCs for S7-1500 CPUs Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Flexible access control for multiple users, based on individual rights now also for larger environments: • Unique user accounts with individual access rights for suitable access configuration according to user's tasks • Roles / Rights concept for different PLC functionality integrated into existing TIA Portal UMAC configuration • Support of UMC for Central User Management • System defined PLC roles for easy configuration • Improved security wizard for quick UMAC setup • Available for S7-1500 CPUs incl. F, T, TF, R and H variants TIA Portal OPC ClientWeb browser PLC Roles / Rights Local Userslogin Page 163 UMC Server … Central Users & Groupsverification Central Users & Groups TIA Portal Library Workflows Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 164 Update only existing types from a TIA Portal global library Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Update only existing types from a TIA Portal global library • User can perform update operation which will update only types which exist in target (project library or global library). • This option can be accessed in update library and update project from global library dialog box. Page 165 TIA Portal Library types marking “Do not use” Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal Library types support “Do not use” marking • New marking can be used to indicate e.g. a template usage of the type or mark a type as obsolete. • Users can set “Do not use” via the context menu to apply the marking to library types. • There are two additional library consistency settings to specify the consistency result when “Do not use” types are used in the library and / or the project. • It is possible to filter types by using the status column. Page 166 Adjust setting for library type consistency state. Mark type as “Do not use”TIA Portal Usability Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 167 Open read-only TIA Portal projects Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Open read-only TIA Portal projects • If a project folder (and its contents) is read- only in Windows file system, TIA Portal will now open the project as a reference project. • Before TIA Portal V20, the opening was canceled. • Such TIA Portal projects can be opened • via “Open reference project” • via “Project” → “Open…” menu (new) • via Windows file explorer (new) Page 168 Filter for PLC diagnostics buffer Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Filter for PLC diagnostics buffer • Filter diagnostics buffer entries to simplify finding relevant events • Filter for free text Page 169 Persistent configuration of user-defined card reader Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Persistent configuration of user- defined card reader • The card reader configuration is saved under TIA Portal Settings “General”. • The configured card reader will be automatically shown in the project tree after a TIA Portal restart. Page 170 Project Navigator Overview – Search in Details View Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Find & Replace in Overview Editor – Details View • Local “Find and Replace” functionality is available in Overview Editor – Details View for all columns. • Search options “Whole Word” and “Match Case” are supported. • “Replace” and “Replace all” is possible. Page 171 TIA Portal Editor Handling – Resource Management Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal improved editor resource management • The improved editor resource management allows the user to open more editors in TIA Portal without any restrictions. • The setting “Maximum number of active editors” defines the number of latest editors kept in active state during a TIA Portal session. The editors that have not been used recently, go into a hibernated state. • Changing the value of the setting will affect the number of active editors. • Accessing a hibernated editor can take the same time as opening it. Page 172 Link to AI Powered Support Chat (Online) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides New help menu entry to start AI Powered Support Chat • By pressing the button you will be directly linked to the SiePortal web page • Multilingual Query Capability • Comprehensive Response Delivery • Receive a detailed answer • Get a direct link to the specific file containing the information you need Page 173 TIA Portal V20 SIMATIC AX Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 174 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. SIMATIC AX in a nutshell Source Control Management via GIT Package Management Unit Testing Object-Oriented Programming (OOP) with Structured Text Cloud Connection Community approach with Open Source Human-readable plain-text code Continuous Integration Pipelines Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 175 SIMATIC AX Engineering Workflows From TIAX to IT-like PLC engineering TIAX direct application loadingTIAX library development IT-like PLC engineering NEW 11/2022 11/2023 06/2024 • Library development • Library testing • Library conversion into TIAP • Technology objects • Hardware configuration • Safety • User-program • HW & SW download STEP 7 TIAPSIMATIC AX • User-program development • Library usage • Software download • Monitor & Debug • Technology objects • Hardware configuration • Hardware download STEP 7 TIAPSIMATIC AX Initial configuration 1 • First PLC configuration + download • User-program development • Library usage • Software download • Monitor & Debug SIMATIC AX Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 176 Supported Hardware (as of 11/2024) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Supported Hardware CPU 1511-1 PN (6ES7 511-1AL03-0AB0, V3.0 and V3.1)​ CPU 1513-1 PN (6ES7 513-1AM03-0AB0, V3.0 and V3.1)​ CPU 1515-2 PN (6ES7 515-2AN03-0AB0, V3.0 and V3.1)​ CPU 1516-3 PN/DP (6ES7 516-3AP03-0AB0, V3.0 and V3.1)​ CPU 1517-3 PN/DP (6ES7 517-3AP00-0AB0, V3.0 and V3.1)​ CPU 1518-4 PN/DP (6ES7 518-4AP00-0AB0, V3.0 and V3.1)​ all PROFINET-devices (incl. drives) for which GSDML files are provided, regardless of manufacturer​ this includes the complete SIEMENS ET200SP, ET200MP and even legacy systems S7-1500V Page 177 NEW Rollout & Availability Limited Sales Release1 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides 1 No free market access of SIMATIC AX. All SIMATIC AX projects must be aligned with DI FA according to the defined process. Please contact your local DI FA SSP. Europe • Germany • France • Netherlands • Belgium • Italy • Spain • Portugal • UK • Austria • Ireland • Bulgaria • Czech Republic • Poland • Sweden • Switzerland America • USA Asia • China (mainland)• Denmark • Finland • Norway • Croatia • Hungary Page 178 Want to know more? Visit the SIMATIC AX website on Siemens.com Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Visit SIMATIC AX www.siemens.com/simatic-ax Visit SIMATIC AX www.siemens.com/simatic-ax Click here Page 179 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 180 TIA Portal Options • SIMATIC STEP 7 Safety • SIMATIC Safe Kinematics • TIA Portal Multiuser • SIMATIC Robot Library • OPC UA • SIMATIC S7-PLCSIM / S7-PLCSIM Advanced • SIMATIC Target for Simulink • TIA Portal Test Suite • SIMATIC Visualization Architect (SiVArc) • SIMATIC Modular Automation (MTP) • SIMATIC Energy Suite • Central User Management (UMC) • Modular Application Creator • SIMATIC ProDiag / SysDiag • TIA Portal Teamcenter Gateway • TIA Package Manager • TIA Portal Safety Validation Assistant SINAMICS Startdrive & DCC – Innovations • Export backup file • Drive parameter compare • Unit switching • Support of new drive firmware functions SIMATIC STEP 7 – Innovations • Continuous Integration: new LAD export/import format • Online features for named value data types • Named value types used by safety blocks and in type libraries SIMATIC Hardware • S7-1200 G2 • SIMATIC Controller S7-1500 Standard & F • Redundant Controller S7-1500 R/H • SIMATIC ET 200SP Open Controller 3 • SIMATIC S7-1500V • S7-Web Server • Safety Integrated System functions • Upgrading TIA Portal projects • PROFINET IRT features • TIA Portal Documentation • TIA Portal Openness • TIA Portal Add-Ins • Version Control Interface (VCI) • CAx: AutomationML & Publication Tools • TIA Portal User Management & Access Control (UMAC) • TIA Portal Library Workflows • TIA Portal Usability SIMATIC AX - Automation Xpansion • IT-like PLC engineering workflow (without TIA Portal): Textual hardware configuration • Support of SIMATIC S7-1500V • Limited Sales release in USA TIA Cloud Services • TIA Portal Cloud & TIA Portal Cloud Connector • TIA Project-Server Cloud SIMATIC Motion Control – Innovations • New Hardware S7-1500 T/TF • New Single Axis Operations / New Synchronous Operations • Support of second PROFINET IRT interface • Cross-PLC synchronous operation using PN/PN Coupler • Kinematics SIMATIC WinCC Unified – Innovations • Enhanced compile time and RT performance • Engineering enhancements (system functions, dynamization overview, control toolbar buttons available via scripting,..) • Improved Engineering efficiency (Corporate Designer, Graphic handling, library, faceplates, CFL, …) • Connectivity (LOGO!, multiplex DB-Name, ..) • Improvements in options (PaCo, Audit) • User and role specific start screens • Redundancy • Process Orchestration (MTP) SIMATIC WinCC – Innovations • Engineering of Professional, Advanced and Unified on one PC • WinCC Advanced: no new RT Advanced V20 Version • WinCC Professional: Support of dynamic SVG, WebUX (deep link, recipe control),.. TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety Content 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) Page 181 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 182 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant SIMATIC STEP 7 Safety Page 183 Integrated shared (I-) device User management access control CI-Support for F-LAD • Configuring of maximum 4 IO-Controller in one TIA-Project possible (instead of 2 based on V19) • Upload in one TIA-Project possible for shared device & shared I-device • The communication module CM1542-1 can be used as IO-Controller in Shared Device configurations • Support for runtime authentication via UMC server for all S7-1500 Failsafe PLCs • Support for local UMAC authentication for S7-1200 Failsafe PLCs • With UMC user groups changes of runtime failsafe user configuration without download are possible • Active directory integration via UMC possible for runtime authentication on S7-1500 Shared Device Shared I-Device • Human readable representation of graphical code • Source code only – no internal meta information • Version independent syntax • Works for F-LAD, LAD & DBs & UDTs • Accessible via Openness Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides SIMATIC STEP 7 Safety Page 184 New PLCs (151xVF and 1200G2) STEP 7 Safety Basic license Named value types (NVT)-support for safety Virtual Failsafe SIMATIC S7-1500F PLC • Hardware independence​ • TIA Portal compatible​ • App Management over IT/Edge S7-1200F G2 • Integrated in the complete range​ • Improved F-IO Portfolio with F-SBs and mixed F-I/O modules​ • Integrated in STEP 7 Basic • S7-1200F seamlessly integrated in STEP 7 • No separate Safety license required from V20 onwards for S7-1200F • Reduce entry costs • STEP 7 Safety Basic will be discontinued from V20 onwards • Know-how protection for Safety blocks utilizing NVTs • Safety blocks utilizing NVTs may be used in type library (when not know-how protected) Time Service App Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides OPC UA Safety Applications requiring a peer-to-peer safety communication Page 185 Third party PLC • Fail-safe Controller-to-Controller (C2C) communication based on OPC UA for S7-1500F CPUs • Vendor independent failsafe communication • Flexible failsafe communication: • Changing communication partners during runtime • Not limited to layer 2 networks • Global Unique Identifier (BaseID) for safety addressing • Dedicated application example for OPC UA Safety will be provided • Focus applications: • Infrastructure / AGVs / Remote control / Oil&Gas / Chemical • Limitations due to non deterministic nature of OPC UA • Varying response times of typically >= ~500ms (increased safety timeout necessary) • Response times are CPU dependent and influenced by encryption and other communication Will be delivered with V20 update (exp. Q2/CY2025) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 186 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant SIMATIC Safe Kinematics and SIMATIC Safe Kinematics for SPU New Safety function for User-defined Kinematics Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Monitor too fast and too slow • The Function block LSafeKin_UserDefined monitors not only if a velocity limit was exceeded but now additionally, if a minimum velocity is maintained at the TCP • In case the velocity is below the limit, the user program can react accordingly Benefit • In applications like laser cutting, a violation of minimum velocity can be handled safely in the User program for example by turning off the laser. Page 187 . TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 188 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Portal Multiuser Engineering Enhanced functions and improved workflows Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Benefit in V20 • Integration of the Kerberos network authentication. • Expansion of the Synchronous Commissioning Mode to include both Exclusive Session and Exclusive Multiuser Mode within the Multiuser Session. • Enhancement of Openness functions to allow marking and unmarking of Multiuser objects and to facilitate collaboration with project server groups. • Improved performance for project server connections, as well as during the creation and check-in of workflows. • Automatic return to online mode following a successful check-in and refresh. • Overall performance enhancements. Page 189 TIA Project-Server Exclusive session Single user Multiple users Local session Local session Local session Server project(-s) Multiuser engineering in TIA Portal enables simple collaboration on TIA Portal projects or libraries in engineering and commissioning. Working together on TIA Portal projects significantly shortens configuration times and enables faster commissioning. You avoid time-consuming sending of data or coordination of changes. TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 190 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant SIMATIC Robot Library Supporting manufacturers Available In progress Pending Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 191 SIMATIC Robot Simulator Trial: Free of charge with Limited Functionality Siemens Smart Robotics Now making robot simulation more accessible Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 192 The Robot Simulator helps you to start with the Robot Library in the easiest way possible while enabling you to set up your entire cell virtuallySIMATIC Robot Library • Trial: Free of charge for 8h • Single Runtime license • One license per robot arm SMART Robotics Offerings Robot vendor A Robot vendor B Robot vendor C SIMATIC Robot Integrator Free of charge SIMATIC Robot Simulator Functions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 193 Functions • SRCI based, cross vendor, virtual robot controller • Seamless integration with existing SIMATIC portfolio • Validation of robot paths incl. their sequence in early stage of the project regarding • Cycle time analysis • Singularity detection • Reachability analysis Products & Solutions • SIMATIC Robot Simulator • SIMATIC Robot Library • SIMATIC S7-PLCSIM Advanced • SIMATIC Robot Integrator Use the SIMATIC Robot Simulator to increase the value of the SIMATIC Robot Library significantly SIMATIC Robot Simulator Demonstration of SIMATIC Robot Simulator Discover how easy and quick the setup with SRS is Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 194 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 195 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant OPC UA – improvement with V20 / FW V4.0 Overview of all new OPC UA features for S7-1500 PLCs Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 196 Quantity structures & Performance *) • Increased number of nodes for user-defined server interfaces • Increased number of possible server methods • Higher performance for Read, Write and Subscriptions Access control • Support of access rights for individual OPC UA user • High flexibility to make data available to authorized users only Alarms & Conditions ▪ Alarms & events in individual language by different OPC UA users ▪ subscribe to 1 out of 3 languages, selectable by the OPC UA client ▪ subscribe all 3 languages at ones in parallel (to be consistent) Subscription Handling • Load balancing between different clients • Subscription can be transferred to other available OPC UA clients Interface modeling • TIA Portal Add-In for fast & easy creation of user-defined interfaces • Replacement of generic SIMATIC server interface with user-defined interfaces OPC UA Highlights *) new S7-1517/1518 HW only OPC UA improvements V20 / FW 4.0 Higher performance & increased quantity structures Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 197 CPU 1517 CPU 1517 (new) CPU 1518 CPU 1518 (new) Improvements quantity structures User-defined server Interface No. of server interfaces 10 10 10 10 No. of nodes for user-defined server interfaces 30,000 100,000 30,000 / 50,000 (V19) 200,000 Subscriptions No. of subscriptions per session 50 50 50 50 No. of monitored items, total 50,000 50,000 50,000 60,000 Methods No. of server methods 100 4,000 100 8,000 No. of parallel running server methods, max 20 100 20 200 No. of in/outputs per server method 20 20 20 20 Improvements performance Read, Write up to factor 4 faster up to factor 3 faster No. of monitored items (with 1s sampling/publish interval) 10,000 50,000 10,000 / 24,000 (V18) 60,000 OPC UA – User & Roles Defined access to variables by different OPC UA users Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 198 Client Client OPC UA server End customer data OEM data user x, y, … user a Client user b…n Definition of access rights at the OPC UA server • for each OPC UA client / role individual • based on node set or interfaces • pre-defined in user information model (e.g. Companion specs, using SiOME) Benefits • High flexibility to make data available to authorized users only • Quick & easy engineering within TIA Portal • Access management based on UMAC concept (local and central user management) Support of access rights for individual OPC UA userOEM End customer OPC UA – A&C multi language support Alarms & events in individual language by different OPC UA users Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 199 Client Client OPC UA server Alarms & Events A) plant & machine control get information about any issues and production stops or periodical alarms and maintenance • subscribe to 1 out of 3 languages, selectable by the OPC UA client B) predictive maintenance user would like to collect all alarms & events in a central data system for investigations • subscribe all 3 languages at ones in parallel (to be consistent) Use Cases HMI Cloud Active languages: Language 1 Language 2 Language 3 OPC UA – Transfer Subscription Handling of subscription by the external clients Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 200 Client Client OPC UA server Load balancing between different clients • An OPC UA client with running subscription gets performance issues • Subscription can be transferred to other available OPC UA clients Use Cases Client A Client B active subscriptions with monitored items Client will run in performance issues Subscription with monitored items will be taken over from Client B OPC UA – TIA Portal Add-In for user-defined interfaces Fast & easy creation of user-defined interfaces Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 201 Enhanced performance • Replacement of generic SIMATIC server interface with user-defined interfaces that offers improved performance Automatic interface generation • Create server interfaces for S7-1200 and S7-1500 R/H PLCs which do not support the generic SIMATIC server interface Customization to fit project needs • Provide flexibility by allowing customization of the server interface to meet specific project requirements OPC UA server user-defined interface Generic interface TIA Portal Add-In has been published on GitHub: https://github.com/tia-portal-applications/tia-addin-opc-ua-modelled-interface Download New TIA Portal Add-In creates a user-defined interface for OPC UA server OPC UA – TIA Portal Add-In for user-defined interfaces (2) Fast & easy creation of user-defined interfaces Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 202 New TIA Portal Add-In creates a user-defined interfaces for OPC UA servers, based on all variables that are accessible via OPC UA • arranges nodes in a structured manner • eliminating the need for manual configuration • significantly reducing time and effort OPC UA server user-defined interface Generic interface Switch off TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 203 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant S7-PLCSIM V20 Enhanced new User Interface support Standard and Advanced Customers Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Key Enhancements SIMATIC S7- PLCSIM V20: • Expanded Hardware Support: Now compatible with the latest S7-1200 G2 and new S7-1500 PLC variants, ensuring seamless integration with the most recent hardware. • Updated Firmware Compatibility: Full support for the latest firmware versions in both S7-1200 and S7-1500 controllers. • Improved Migration: Easily import sequences from older PLCSIM versions to maintain continuity in your projects. • Efficiency with Shortcuts: Boost your productivity with newly introduced keyboard shortcuts for faster navigation and control. • Improved User Interface: A refreshed interface provides a more intuitive experience, with both S7-PLCSIM Standard and Advanced* functionalities integrated. * S7-PLCSIM Advanced license required Page 204 Improved Workflow: Save time with a more streamlined startup process. PLCSIM can now be launched directly without the need to create or save a workspace, simplifying your workflow. Essentials View: Focus on what matters most with the new Essentials View. Minimize the UI to display only the list of PLC instances, and keep it pinned for quick access. Creation of new instances can be done here directly. This new view can be used as PLCSIM Advanced Control Panel. Even, once a PLC instance in Advanced mode is started, this instance is shown on the Essential View. S7-PLCSIM-Advanced V7.0 Key enhancements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 205 With SIMATIC S7-PLCSIM Advanced, virtual controllers for simulating S7-1500 based controllers can be created and used for extensive simulation of functions. Key Enhancements SIMATIC S7-PLCSIM Advanced V7.0 • Expanded Hardware Support: Compatible with the latest innovated S7-1500 Hardware PLCs 1516T / 1517 / 1518 CPUs with their bigger quantity structures in program and data memory - ensuring seamless integration with the most recent hardware. • More precise simulation through feature configuration support. Any new PLC instance behaves after the first project download in terms of PLC memory and other specific resources like tags as the corresponding real PLC. No bigger program can be downloaded anymore to the simulation as to a real PLC. Behaving as a real PLC includes that overloading with another PLC type is not possible. • Extended Compatibility: TIA Portal projects from versions V14 to V20 as well as CPU firmware versions V1.8 to V4.0 are now supported. • Streamline API Versions: Supporting the API versions from V3.0 to V7.0 by carving out the earliest legacy variants. S7-PLCSIM-Advanced V7.0 More precise simulation 1/2 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Previous behavior New behavior Start PLCSIM specific instance S7-1511 6ES7511-1AL03-0AB0 Always Maximum memory allocated Start PLCSIM specific instance S7-1511 6ES7511-1AL03-0AB0 Exact memory allocated for selected CPU Page 206 Previous behavior S7-PLCSIM Advanced allocates for any PLC type the maximum quantity structure. Means starting up a new instance reserves more memory of the PC as needed and a download to a to smaller PLC type was possible despite of a to big project size. New behavior The original quantity structure is adjusted during download of any PLC type. Means that the PLC instance using less memory on a PC if downloaded PLC is smaller than the previous biggest PLC. A download is only possible if the project is within defined resources for that specific PLC type. S7-PLCSIM-Advanced V7.0 More precise simulation 2/2 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Download of incompatible PLC is possible e.g. 1516 6ES7516-3AP03-0AB0 Download of incompatible PLC is forbidden e.g. 1516 6ES7 516-3AP03-0AB0 Page 207 Previous behavior S7-PLCSIM Advanced always accepts the overloading of different PLC types in a long existing simulation instance in case the PLC family is the same. This is not the behavior of a real PLC and this of course can run in trouble scenarios over time. New behavior Overloading with compatible PLC is possible but not with different PLC types anymore. The instance is after first download PLC type specific and behaves like real PLC in all download scenarios. Previous behavior New behavior Start PLCSIM specific instance S7-1511 6ES7511-1AL03-0AB0 Start PLCSIM specific instance S7-1511 6ES7511-1AL03-0AB0 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 208 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant SIMATIC Target for Simulink® V6.0 SP2 General Improvements Improvements to Simulink Target Toolstrip New controls in the Target Toolstrip: • Control Panel: Navigates to External Mode Control Panel • Tune Parameters: Navigates to Model Data Editor to inspect and edit data items like 6202 signals and parameters Secure External Mode for LiveTwin Target • All external mode communication between LiveTwin Runtime and Simulink is now encrypted User group handling for generated blocks Proper handling of user groups in the TIA Portal PLC program: • All re-generated program blocks will be stored in their original location Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 209 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 210 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant Test Suite V20 Application Test improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Run test case and debug PLC program in parallel If a test case fails, the “Execute test case in background” option helps with troubleshooting during test execution by using debugging mechanisms of TIA Portal, such as: • Block monitoring and watch tables • Breakpoints in SCL / STL code • Signal traces Benefits • Identifying programming errors becomes easier as the user can now monitor blocks, set breakpoints or watch trace records during test execution. • During test execution, the user can proceed with other engineering tasks, such as e.g. HMI engineering. Page 211 RUN test case in background Test Suite S7-PLCSIM Adv. API S7-PLCSIM Adv. Test Suite V20 Application Test improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Test Set – Organize test cases • Arrange and specify the execution sequence of test cases using the new \"Test Set\" concept. • Import and export of test sets in a text format. • Automate the execution of test sets within pipelines using the provided Openness APIs. Benefits • Provide quick feedback by executing only the relevant test cases. • Minimize redundancy. • Enhance test coverage and ensure traceability between the program and tests. • Categorize test cases based on their relevance. Page 212 Test Suite S7-PLCSIM Adv. API S7-PLCSIM Adv. Test Suite V20 General Improvements Application test • Support of SIPLUS S7-1500 PLCs • Verification of data types DATE , TOD , LTOD and LTIME signals are supported now • Summary of Passed/Failed/Inconclusive test cases System test • Openness APIs to delete and rename a test cases • Summary of Passed/Failed/Inconclusive test cases • Optional parameter for Wait statement to specify condition (Equal or In range​): ➢ Supported data types : Binary numbers and Integers ➢ Intuitive feedback message about test completion is based condition met or time out specified Style guide check • Timers and Counters can be considered as block instances ➢ Common rules for block instance rules inclusive Timers and Counters can be used Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 213 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 214 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant WinCC Unified V20 - SiVArc SiVArc with enhanced Trial mode (without license) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 215 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Limited functionality without license ➢ The Trial mode is no longer limited to 21 days ➢ SiVArc can be used with limited number of rules without purchasing a license: ➢ Generate function will be enabled for supported mode & rule set ➢ Corresponding warning is provided, if mode and rule requirements are not met Rule table Maximum Number of rules configurable Screen rule table 5 Text list rule table 3 Alarm rule table 1 Tag rule table 1 Advanced tag rule table Not allowed in Trial mode Copy rule table Not allowed in Trial mode Panel RT Advanced RT Professional WinCC Unified V20 - SiVArc SiVArc supported all standard Unified Screen Objects Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 216 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Following additional screen Objects can be generated via SiVArc on Unified HMIs Basic Objects: ➢ Circle, Ellipse, Line, Polyline, Polygon, Circular arc, Elliptical arc, Circle Segment & Ellipse Segment Elements ➢ Check box, Radio button, List box, Touch area & Clock Controls ➢ Screen window, Faceplate container, Trend companion, Alarm control, Parameter set control, System diagnostic control, Criteria analysis control Web control & Media player Panel RT Advanced RT Professional WinCC Unified V20 - SiVArc Advanced tag rule enhancements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 217 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Advanced tag rule-based generation supports following ➢ Acquisition cycle & Acquisition mode properties can be set via tag template ➢ HMI internal (Local) tags can be generated via advanced tag rules ➢ User can generate only used tags on target HMI devices ➢ HMI tags based on PLC Tag tables can be generated Panel RT Advanced RT Professional SIMATIC Visualization Architect V20 New SiVArc expressions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 218 Unified Basic Panel Unified Comfort Panel WinCC Unified PC New SiVArc expressions ➢ The expressions “LayoutField.Width” and “LayoutField.Height” can be used to generate image objects based on the size of the layout fields ➢ With the following expressions, the user can read the PLC variable columns “Accessible…”, “Visible…” and “Writable…”: • S7Variable.HmiAccessible • S7Variable.HmiWritable • S7Variable.HmiVisible e.g.: To control the generation of the HMI variables via the Visible setting in HMI engineering Panel RT Advanced RT Professional WinCC Unified V20 - SiVArc Multi user engineering support Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 219 Unified Basic Panel Unified Comfort Panel WinCC Unified PC SiVArc rule tables as multiuser objects ➢ SiVArc rule tables can be used in Multiuser Engineering, there by significantly reducing the configuration time The rule tables supported are: • Screen rule table • Tag rule table • Alarm rule table • Text list rule table • Copy rule table • Expression tale ➢ On inconsistency respective messages are displayed to user Panel RT Advanced RT Professional WinCC Unified V20 - SiVArc Usability improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 220 Unified Basic Panel Unified Comfort Panel WinCC Unified PC Improvements in usability ➢ Clearing the generation data for multiple devices is possible ➢ Troubleshooting SiVArc expressions is possible at expression tables ➢ Layout screens are automatically generated from user configured screens, reducing the effort for manual engineering ➢ SiVArc log is enhanced to display HMI tags by name Panel RT Advanced RT Professional WinCC Unified V20 - SiVArc General improvements Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 221 Unified Basic Panel Unified Comfort Panel WinCC Unified PC General improvements ➢ User can decide to generate HMI tags for variables or parameters of technology objects via Project setting ➢ Expression resolver additionally supports Program block/block instance, HMI device, Library object as source object ➢ Configuring the Start screen in Runtime settings via SiVArc generation ➢ Generation support of alarm logs via copy rules and alarm rules Panel RT Advanced RT Professional TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 222 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant MTP as driver for flexible production and package unit integration Core concepts: Standardized interfaces and application-level description Module Type Package (MTP) MTP is a standardized, non-proprietary, application-level description of autonomous equipment assemblies Process Orchestration Layer (POL) Flexible, modular plants are built out of intelligent, autonomous Process Equipment Assemblies (PEAs) with standardized1) interfaces described in Module Type Package (MTP) Process Equipment Assemblies (PEAs) Formula  + + Procedure Connectivity non-modular / brownfield sub plant      Page 223 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides hosted by: Based on: 1) MTP standard 2658 hosted by PI Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 224 Modular Automation is a cross-industry trend: with our existing MTP-portfolio we can actively address the market! Chemicals Pharma F&B Batteries Hydrogen W&WW Marine Intralogistics No reprogramming or new installation, just plug & produce We enable our customers to implement MTP based on our standard portfolio (PLCs, HMIs, TIA Portal, …): ➢ Benefit for OEMs: Completion of our portfolio to enable the delivery of MTP-compliant module / process equipment ➢ Benefit for End customers & System Integrators: Completion of our HMI and SCADA portfolio to monitor and control modular plants (Process Orchestration)End customer & System IntegratorsProcess Orchestration Layer (POL)OEMProcess Equipment Assembly (PEA) TIA Portal - MTP Portfolio Modular automation Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 225 Option 1: MTP based on SIMATIC PLC and HMI Option 2: MTP based on Edge for brownfield OR Machine Proxy SIMATIC S7   SIMATIC MTP Integrator for WinCC Unified SIMATIC MTP Creator Control Function Library (CFL) Process Function Library (PFL) TIA Portal libraries: OEM’s Libraries WinCC Unified SCADA Supervisory Control and Data AcquisitionOEMProcess Equipment Assembly (PEA) TIA Portal - Engineering Efficiency for Modules Modular automation – SIMATIC Control Function Library (CFL) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 226 WinCC Unified SIMATIC TIA Portal Control Module M Local Operation symbols & faceplates CFL function blocks S7-1xxx HW / SW controller Unified Basic Panel Unified Comfort Panel WinCC Unified PC Standardized module engineering with a modular and memory optimized library, offering: ➢ TIA Portal Step 7 (S7-1xxx HW / SW controller ) and WinCC Unified Objects with optimized footprint & performance, (Industry-specific blocks like Aggr8, TimeSwitch, SetCrv, …) ➢ State of the art TIA Portal Engineering based on PLCOpen ➢ Supports virtual commissioning based on PLCSIM Advanced and SIMIT with ready to use templates tailored to CFL CFL can be used in MTP and Non-MTP Use Cases ➢ Faceplates aligned to WinCC Unified Look & Feel (HMI Design based on HMI Template Suite) ➢ Corporate Design via SIMATIC WinCC Unified Corporate Designer / TIA Portal Standardized Operation Latest Version on : Simatic MTP SIOS Landing Page Module Type Package (MTP)OEMProcess Equipment Assembly (PEA) TIA Portal - Engineering Efficiency for Modules Modular automation – SIMATIC Control Function Library (CFL) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 227 Control • PIDCtrl • Aggr8 • TimeSwitch8 • SetCrv • Polygon Interlock • LockView4 • LockView8 Drives • MonBinDrv • MonAnaDrv • MonBinVlv • MonAnaVlv Monitor • AnaMon • BinMon • DIntMon • StringView Operate • AnaManInt • BinManInt • DIntManInt Common Blocks • Maintenance • DriveInterconnector FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP FP MTP Service Framework • Service • Procedure • Config Parameter • Procedure Parameter FP New Unified Basic Panel Unified Comfort Panel WinCC Unified PC CFL - Industry-specific blocks Optimized footprint & performance for S7-1xxx HW / SW controller & WinCC Unified Latest Version on : Simatic MTP SIOS Landing Page Module Type Package (MTP) Hydrogen TIA Portal Application Examples based on CFL RectifierOEMProcess Equipment Assembly (PEA) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 228 SIMATIC Control Function Library SIMATIC Process Function Library .mtp Program blocks PLC data types Screens … MTP Creator Add-in SIMATIC MTP Creator library Custom Library TIA Portal goes MTP - Engineering Efficiency for Modules Modular automation – SIMATIC MTP Creator SIMATIC MTP Creator for exporting an MTP-conform file from an existing TIA project, by only one-click! ➢ The MTP file contains MTP relevant Contents like control modules, services, OPC UA configuration and the pictures based on the STEP 7 (TIA Portal) and WinCC Unified engineering. ➢ Supports VDI/VDE/NAMUR 2658 Part 1 / 2 / 3 / 4 ➢ Supports SIMATIC Process Function Library (PFL), SIMATIC Control Function Library (CFL) and Customer Libraries New Latest Version on : Simatic MTP SIOS Landing Page Module Type Package (MTP) TIA Portal - Process Orchestration Modular automation - MTP Integrator for WinCC Unified Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 229 No. of Package Units / Machines : Unified PC RT: 10 // Unified Comfort Panel: 3 MTP Import & Integration in WinCC Unified Process Equipment Assemblies SIMATIC WinCC Unified PC WinCC Unified ES + MTP Integrator Import Integrate standardized MTP package units / machines in WinCC Unified, including PLC and HMI components ➢ Standardized, line operation of package units / machines Use MTP files (Siemens or 3rd party) to integrate (cross- vendor ) machines automatically ➢ By instantiating the machine type within your project, the OPC UA connections, PLC tags and HMI components are created with just one click. Controlling complete units / machines in an abstract way ➢ Operators can focus on the production without needing to understand details of each multi-vendor machine. ➢ Maximized operational efficiency, reduced training effort and consistency regarding operation, even if new modules are added modified due to changing market demands. Latest Version on : Simatic MTP SIOS Landing Page Control and Operate for Discrete IndustriesEnd customer & System IntegratorsProcess Orchestration Layer (POL) Unified Basic Panel Unified Comfort Panel WinCC Unified PC Module Type Package (MTP) TIA Portal - Process Orchestration Reduce engineering effort by -70% 1) and Increase flexibility by +80% 1) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 230 1) Source: ZVEI, 2022 2) Implementation compliant to the noted parts of the MTP Specification (VDI/VDE/NAMUR 2658) 3) Concepts for runtime interoperability (part 5/5.1) and alarming (part 6/7) are not fully specified, yet ➢ MTP Import in WinCC Unified Engineering2) ➢ Type management incl. full versioning for your MTP files ➢ PEA instance management ➢ Static and dynamic HMI Integration (MTP Part 2 + 3) ➢ Monitoring and control via Faceplate (block icons and detailed views) Orchestration of plantwide HMI (part 3) ➢ Manual operation of MTP Services via HMI (part 4) ➢ MTP Multilanguage Support ➢ Native OPC UA communication with configurable levels of security mechanisms (draft part 5/5.1) 3) ➢ POL-based alarms (draft part 6/7) 3) New New Unified Basic Panel Unified Comfort Panel WinCC Unified PC Latest Version on : Simatic MTP SIOS Landing Page Control and Operate for Discrete Industries Module Type Package (MTP)End customer & System IntegratorsProcess Orchestration Layer (POL)End customer & System IntegratorsProcess Orchestration Layer (POL) TIA Portal - Process Orchestration SIMATIC MTP Integrator for WinCC Unified Trial – Simply try it out Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 231 MTP trial – Simply try it out Try our 30-day rapid line automation engineering with MTP trial. No installation is required. Start exploring in minutes. (Chrome/Firefox/Edge/Safari recommended) Easily adapt production lines to fast-changing consumer demands with a module based standardized approach ➢ Adding new equipment or modifying an existing and running production line is typically complex, time consuming and risky ➢ Cell or line visualization required for better overview and central operation needs, if manually engineered, consumes substantial time and effort and is error prone ➢ With the standardized Module Type Package (MTP) approach, you can reduce risk, engineering effort and downtime, as well as shorten the time to easily integrate new equipment into an existing production line ➢ MTP is a widely standardized and market-proven technology that can be purchased off-the-shelf Unified Basic Panel Unified Comfort Panel WinCC Unified PC Module Type Package (MTP) TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 232 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Portal V20 SIMATIC Energy Suite Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Energy Efficiency Monitor for Machines • Full integration of S7 Energy Efficiency Monitor for Machines into the Energy Suite • Automatic program generation of the PLC program for S7-1500 controllers • Generation of the visualization with SiVArc (no additional SiVArc license required) WinCC Unified • Improved user experience by revision of WinCC Unified visualization • Evaluation of energy data and automatic creation of reports with the Energy Suite Export Tool for WinCC Unified Acquisition EE-Monitor Page 233 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 234 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 235 SIMATIC S7-1500 UMAC can connect to UMC to use centrally managed users and groups • CPU services can now be used by centrally managed users and user groups from UMC and a connected Microsoft Active Directory. • The central user data can be changed directly in the central user administration or the MS Active Directory without changes to the CPU configuration. Benefit • Central user management is available for a growing supported product portfolio, allowing an efficient user management • Further supported products are: TIA Portal Engineering | WinCC Unified RT | WinCC Advanced RT | SINEMA RC | SINEC NMS | SINEC INS, SIMATIC PCS neo | OpCenter Execution Central Users and Groups UMC Server … MS Active Directory … Central Users & Groups UMC supported devices and applications S7-1500 CPU S7-1500 CPU UMC supported devices and applications UMC supported devices and applications Central User Management (UMC) Support of SIMATIC S7-1500 CPU for Central User Management Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 236 Active Directory … UMC Ring Server / Domain …  different →DNS name NetBIOS name ✓ Support of unconventional AD configuration • UMC now supports Active Directory configurations that deviate from Microsoft recommendations but are frequently used by customers. • UMC can now connect to Active Directory even if the DNS and NetBIOS names are different. Benefit • This enables a better integration of UMC into existing customer infrastructures and a more flexible deployment. Central User Management (UMC) Support for MS Active Directory configurations with different FQDN and NetBIOS name TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 237 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant Modular Application Creator – Generating instead of programming Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Generation of the TIA Portal project incl. drives: HW Config in TIA Portal Modular Application Creator 19.1 Equipment Modules ECAD/HWCN • Generating instead of programming TIA Portal projects • Easy configuration with technological view and graphical guided assistance as well as automatic validation • Management of projects and versioned/signed equipment modules Module Builder Visual Studio Extension to create your own custom modules OMAC Intel. Belt TO Gen. Robotics MCS ConvertingPrinting Weihen-stephan Weihen- stephan SIMIT HMI (Openness) TIA Portal project I-Mall I-Mall I-Mall Update! Update! Update! Page 238 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 239 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant ProDiag Customer Benefits: Key questions to make decisions Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides You are faced with the task of adapting your process diagnostics very often and do not want to change your library function blocks every time? You want to cycles granularly record all process errors in order to identify causalities? You want to reliably identify sporadic errors and display them on the HMI? You want to handle your supervisions centrally in a separate view, independent of your user program? Page 240 ProDiag Availability Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides SIAMTIC S7-1500 family SIMATIC HMI WinCC Unified/Unified Comfort Panels SIMATIC HMI WinCC Professional/WinCC Scada (V.8 or higher) SIMATIC HMI WinCC Advanced/Comfort Panels WinCC Adv. WinCC WinCC WinCC WinCC WinCC Adv. Page 241 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Auto Update • PLC is available as a central alarm server for 3 languages • System ensure the data consistency • No consideration of different engineering steps required → Download to PLC → ready • Easy maintenance → No specialist staff for HMI required • Changing alarms during operation Configuration Instead of programming Visualize Jump into PLC code Page 242 System advantage: Automatic Update of the HMI during runtime TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 243 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Portal Teamcenter Gateway Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 244 TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 245 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Package Manager Download libraries and application examples with one click Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesUnrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 247 TIA Package manager (Desktop Client) TIA Package Manager - Introduction The TIA Package Manager is a tool designed to streamline the process of downloading, and managing application packages – global libraries, TIA Add-Ins and example projects. It enhances productivity by simplifying the process of searching, installing and managing libraries - and TIA Add-Ins - for TIA Portal ▪ TIA Portal global libraries ▪ TIA Portal projects ▪ TIA Add-Ins ▪ Ready-to-use applications (HMI & PLC) DPV TIA Package Manager – User Interface Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 248 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 249 TIA Package Manager - Main features Advanced search filters Real-time results and suggestions Powerful search engine Direct links to SIOS Access major software requirements directly. Verify which TIA Portal version is required for the package Compatibility check Installation tracking Monitor which libraries and TIA Add-Ins were installed. Uninstall or update: Manage installed libraries and TIA Add-Ins. Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 250 8+ Apps ➢ LSKI ➢ LAxisCtrl ➢ LCamHdl ➢ LLnCtrl ➢ LCalcMC ➢ LDrvSafe ➢ .... October / 2024 V 1.0.0 SIOS release 20 + TIA Add-Ins TIA Package Manager – SIOS release TIA Package manager (Desktop Client) How to get the TIA Package Manager Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 251 TIA Package manager (Desktop Client) www.siemens.com/tia-package-manager TIA Portal V20 TIA Portal Options Unrestricted | © Siemens 2024 | TIA Portal V20 Technical Slides Content Page 252 01 01 SIMATIC STEP 7 Safety SIMATIC STEP 7 Safety 02 02 SIMATIC Safe Kinematics SIMATIC Safe Kinematics 03 03 TIA Portal Multiuser TIA Portal Multiuser 04 04 SIMATIC Robot Library SIMATIC Robot Library 05 05 OPC UA OPC UA 06 06 SIMATIC S7-PLCSIM / S7-PLCSIM Advanced SIMATIC S7-PLCSIM / S7-PLCSIM Advanced 07 07 SIMATIC Target for Simulink SIMATIC Target for Simulink 08 08 TIA Portal Test Suite TIA Portal Test Suite 09 09 SIMATIC Visualization Architect (SiVArc) SIMATIC Visualization Architect (SiVArc) 11 11 SIMATIC Energy Suite SIMATIC Energy Suite 12 12 Central User Management (UMC) Central User Management (UMC) 13 13 Modular Application Creator Modular Application Creator 14 14 SIMATIC ProDiag / SysDiag SIMATIC ProDiag / SysDiag 15 15 TIA Portal Teamcenter Gateway TIA Portal Teamcenter Gateway 16 16 TIA Package Manager TIA Package Manager 10 10 SIMATIC Modular Automation (MTP) SIMATIC Modular Automation (MTP) 17 17 TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant TIA Portal Safety Validation Assistant Obligation of verification and validation is stated in the standards Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 253 Machinery Directive EN ISO 13849-2 Section 8 | EN ISO 62061 Section 9 “[…] function test of the safety functions in all operating modes of the machine to determine whether they comply with the specified characteristics […]” One important step: Verification & validation Time-consuming function test → Test and document whether the safety functions are implemented as previously specified CE label Each machine needs to have the CE label which confirms that all of the relevant directives have been complied Road to CE marking of a machine … TIA Portal Safety Validation Assistant Overview of machine validation Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 254 Solution Guided validation of the machine safety functions Easily validate the parametrization of the entire chain of a safety function by using software-guided test wizards. The Safety Activation Test in TIA Portal Safety Validation Assistant validates the safety function of the entire chain from sensor to actuator. It supports SIMATIC as well as SINAMICS products. The results can be exported afterwards in a single test report to proof the correct function of the entire safety function chain. The test report is an integral part of the machine documentation. Safety concept, design and engineering Safety Concept Safety Design Engineering Validation TIA Portal Validation Safety Validation Assistant Detect Evaluate React Documentation TIA Portal Safety Validation Assistant Delivery forms Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 255 TIA Portal Safety Validation Assistant V20 Software Update Service Article number for DVD – – Article number for license download (OSD) 6SL3072-5LA05-0XG5 6SL3072-5AA05-0XY8 Delivery with STEP 7 Prof. X1 X1 Updates in TIA Portal Updater X X 1 No installation required TIA Portal Safety Validation Assistant Safety Activation Test workflow & required license Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 256 Workflow Safety Validation is an important step on the way to the required CE marking of the machine! Definition: All safety functions via the wizard: Operating mode, input conditions, expected response (this step can be initiated by the configuration engineer before Commissioning phase are executed) 01 After machine commissioning: Performing the tests and run through all defined safety functions via the guided step-by-step wizard 02 Automatic creation of the test report with all necessary information03 Safety Activation Test is part of the Safety Validation Assistant and thus also part of the TIA Portal Safety Validation Assistant license. TIA Portal Safety Validation Assistant How to start Location in TIA Portal The Safety Activation Test is located under Cross- device functions Supported Hardware Depending on the installed software, the following devices are supported: With STEP 7: • SIMATIC PLC (Standard and Failsafe) • Distributed IOs (Standard and Failsafe) With Startdrive: • SINAMICS Drives (With enabled Safety Integrated Functions) Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 257 TIA Portal Safety Validation Assistant Possible evaluation devices Every Safety Activation Test needs a device that acts as evaluation device. The following devices are supported: • SIMATIC PLCs • SINAMICS Drives The evaluation device contains the logic of the Safety function. The Safety Activation Tests supports the trace functionality on the evaluation device. SIMATIC as evaluation device • For any SIMATIC in TIA Portal • Access boolean tags for test • Access all tags for trace • Access networked devices (periphery, SINAMICS, …) for test Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 258 SINAMICS as evaluation device - For any SINAMICS with more than 1 F-DI - Access Safety Integrated Function status and F-DI status for test - Access all parameters for trace Detect Evaluate React TIA Portal Safety Validation Assistant Intelligent network analysis Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 259 PLC as evaluation device – Access all networked devices in Safety Activation Test Drive as evaluation device – Access only the drive TIA Portal Safety Validation Assistant Trace functionality PLC as evaluation device • 1 trace instance can be used • All PLC tags available • Trigger „on value change“ Drive as evaluation device • 1 trace instance can be used • All drive parameters available • Trigger on Boolean signals • Automatic cycle time calculation Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 260 Copy functionality • Duplicate or copy & paste test cases • Copy & paste a whole Safety Activation Test TIA Portal Safety Validation Assistant Reusing the Safety Activation Test Library support • Use project and global libraries with Safety Activation Test • Storage as Master copy Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 261 copy paste Access TIA help directly by following the -- TIA Portal Safety Validation Assistant Accessing the TIA help Having a question regarding the Safety Activation Test? Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 262 The link will guide you to the correct place inside TIA help! ? ! TIA Portal Safety Validation Assistant Test report Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 263 Overview all relevant data (firmware version, safety parameters) → Time savings compared to manual documentation All test results of the Activation Test (incl. trace images) Separate sheet for signatures Same look and feel as the report from Startdrive Safety Acceptance Test for SINAMICS A perfect match! Download and Trial https://support.industry.siemens.com/cs/ww/en/view/109963850 https://support.industry.siemens.com/cs/ww/en/view/109963851 https://support.industry.siemens.com/cs/ww/en/view/109772248 Download TIA Portal V20 and try it for free for 21 days https://support.industry.siemens.com/cs/ww/en/view/109963850 Download TIA Portal V20 updates https://support.industry.siemens.com/cs/ww/en/view/109963851 Add page to mySupport favorites and activate email notification to receive latest updates immediately. Try without installation effort via TIA Portal Cloud Activate your 21 days TRIAL access for TIA Portal V20 and previous versions: https://support.industry.siemens.com/cs/ww/en/view/109772248 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 264 Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 265 Disclaimer http://www.openssl.org/ © Siemens 2024 Subject to changes and errors. The information given in this document only contains general descriptions and/or features which may not always specifically reflect those described, or which may undergo modification in the course of further development of the products. The requested features are binding only when they are expressly agreed upon in the concluded contract. All product designations may be trademarks or other rights of Siemens Aktiengesellschaft, its affiliated companies or other companies whose use by third parties for their own purposes could violate the rights of the respective owner. MATLAB and Simulink are registered trademarks of The MathWorks, Inc. Open Source Software License Information: The products shown in this presentation include software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/) Contact siemens.com/tia-portal Published by Siemens siemens.com/tia-portal Unrestricted | © Siemens 2024 | TIA Portal V20 Technical SlidesPage 266","libVersion":"0.3.2","langs":""}