#### 1. Set de IP with the BootP-DHCP Tool or the fix selectors

#### 2. Connect:
![[Pasted image 20241113143906.png|925]]

#### Start commissioning:
![[Pasted image 20241113144039.png|925]]

![[Pasted image 20241106143030.png|925]]

![[Pasted image 20241106143044.png|925]]

![[Pasted image 20241106143204.png|925]]

![[Pasted image 20241106143130.png|625]]

![[Pasted image 20241106143229.png|925]]

![[Pasted image 20241106143319.png|925]]

![[Pasted image 20241106143403.png|925]]

![[Pasted image 20241111140802.png|900]]

### Option with Analog:

0x2636:001 : 0
0x2636:002 : 20hz ( Da testare il minimo )
0x2636:003 : 120hz

![[Pasted image 20241113144249.png|900]]

### Option for Network control:

![[Pasted image 20241111144606.png|900]]


![[Pasted image 20241106143747.png|900]]

0x2631:037 : 1 ( Constant True )
0x23A1:005 : 0 ( IP Static )

![[Pasted image 20241113144544.png|900]]
#### Save parameter on Drive:
![[Pasted image 20241111150316.png|900]]
#### Restart with current values:
![[Pasted image 20241111150227.png|900]]

#### Reset:
![[Pasted image 20241111150411.png|925]]

#### Device name / Set point / Run enable:
![[Pasted image 20241111150832.png|925]]


## Parameter to be downloaded:

![[i550 protec EtherNetIP standard IO 60 Hz_192_168_1_131_M23160.gdc]]


### Important Parameters:
***

| Index  | Subindex |     Value     |                    Text                    | Unit |      Display Value       |
| :----: | :------: | :-----------: | :----------------------------------------: | :--: | :----------------------: |
| 0x2001 |    0     |    M23160     |                Device name                 |      |                          |
| 0x23A1 |    1     | 192.168.1.131 |      EtherNet/IP settings: IP address      |      |                          |
| 0x23A1 |    5     |       0       |   EtherNet/IP settings: IP configuration   |      |      Stored IP [0]       |
| 0x2540 |    1     |       2       |    Mains settings: Rated mains voltage     |      |       480 Veff [2]       |
| 0x2631 |    2     |       1       |             Function list: Run             |      |    Constant TRUE [1]     |
| 0x2631 |    13    |       0       | Function list: Reverse rotational direct.  |      |    Not connected [0]     |
| 0x2631 |    37    |       1       |  Function list: Activate network control   |      |    Constant TRUE [1]     |
| 0x2634 |    1     |      50       |      Digital outputs function: Relay       |      |       Running [50]       |
| 0x2634 |    2     |      51       | Digital outputs function: Digital output 1 |      | Ready for operation [51] |
| 0x2636 |    2     |      50       |    Analog input 1: Min frequency value     |  Hz  |                          |
| 0x2636 |    3     |      120      |    Analog input 1: Max frequency value     |  Hz  |                          |
| 0x2640 |    2     |       0       |   HTL input settings: Maximum frequency    |  Hz  |                          |
| 0x2860 |    1     |       5       | Frequency control: Default setpoint source |      |       Network [5]        |
| 0x2916 |    0     |      120      |             Maximum frequency              |  Hz  |                          |
| 0x2917 |    0     |       3       |            Acceleration time 1             |  s   |                          |
| 0x2918 |    0     |       3       |            Deceleration time 1             |  s   |                          |