#### Brake without DynaStop option:

![[Pasted image 20241107151714.png]]

#### DynaStop enabled motors:
***
![[Imagen de WhatsApp 2024-11-07 a las 14.49.30_547095fc.jpg|625]]
# Activating the function


https://download.sew-eurodrive.com/download/html/27802922/en-EN/2508655041141416666507.html

##### Danger due to falling loads.

##### Severe or fatal injuries.

- Do **not** use the "Release brake/deactivate DynaStop® with FCB01" function in lifting devices or applications with loads that might potentially fall down.
- Inhibit the function via the following steps:

- Deactivate the function of DIP switch S1/2 using parameter _Deactivation_ = **"1"** (Path: _Functions > Inputs/Outputs > Basic device > DIP switch functions > Release brake/deactivate DynaStop_® _deactivate with FCB01_ – _Enable_)

- Inhibit the function using the parameter _Release brake/deactivate DynaStop® with FCB 01 – enable_ = **"0"** (path: _Functions_ > _Drive functions_ > _FCB 01 Output stage inhibit_).

In case the output stage is inhibited by a control signal (digital input or process data bit), the DynaStop® function can be deactivated using the function "Release brake/deactivate DynaStop® with FCB01". For example, this allows to move loads freely using a horizontal conveyor.

Now make the following settings:

1. **Enabling the function**:

- **Via DIP switch S1/2**  
    you switch the DIP switch S1/2 "Release brake/deactivate DynaStop® with FCB01 – enable" = ON.

- **Via the parameter setting**  
    you deactivate DIP switch S1/2 by setting the parameter _Deactivation_ = **"1"**. (Path: _Functions_ > _Input/outputs_ > _Basic device_ > _DIP switch functions_ > _Release brake/deactivate DynaStop_® _with FCB01 – release)_  
    Release the function "Release brake/deactivate DynaStop® for FCB01 – enable" by setting the parameter _Release brake/deactivate DynaStop_® _for FCB01 – release_ = **"1"** [1]. (Path: _Functions_ > _Drive functions_ > _FCB 01 Output stage inhibit_)

![](https://download.sew-eurodrive.com/download/html/27802922/Images/png/18014420484359179__en__Web.png)

![](https://download.sew-eurodrive.com/download/html/27802922/assets/img/icons/x_white.png)

5. **Configuring the control signal**:

- **Control via digital input**  
    Assign a digital input with the function "Release brake/deactivate DynaStop® with FCB01" [2].

![](https://download.sew-eurodrive.com/download/html/27802922/Images/png/18014420484362123__en__Web.png)

![](https://download.sew-eurodrive.com/download/html/27802922/assets/img/icons/x_white.png)

- **Control via process data bit** (not available in DBC designs)  
    Assign a process output bit with the function "Release brake/deactivate DynaStop® with FCB01" [3].

![](https://download.sew-eurodrive.com/download/html/27802922/Images/png/27021619739106059__en__Web.png)

![](https://download.sew-eurodrive.com/download/html/27802922/assets/img/icons/x_white.png)

The set control signal can be used to deactivate DynaStop® when the function block FCB01 is active.


### On the manual

![[Pasted image 20240925131406.png]]

### To be tested
***
![[Pasted image 20240925131415.png]]