* Two main parts
	* FB Tilting
		* Sic : Synchronism?
		* Cont ? 
		* Sensor for tensioning?
		* Max ?  Overspeed?
		* Min : Stop / Start
		* Variable Speed. - = reference by filler
		* Formats: ? 66mm a 93mm => 27mm.  How is changed?
		* Start:
			* Fill to Sic with minimum accumulation
			* Run chain at fixed speed
			* Wait for phase to start ( the phase and the ramp of doser must be parametrized)
				* After some bottles go in ramp to variable speed
	* FB Skid
		* Inputs:
			* TT1 : water temperature
			* LT1 : water level sensor
			* PT1 : pressure sensor ( max control => alarm )
		* Outputs:
			* AMV1: valve to modulate cool water to the Skid
				* If P1 is running and TT1 > min -> open then valve
			* P1 : water pump
				* STOP LT1 < min
				* START LT1 > medium
			* AV1 : Water filling and top-up valve


![[Pasted image 20240410153217.png]]

### Formats:
***

| ID  |     FORMATO      |    Ø x H     | Ø collo | Tempo di tilting (s) | Max m/m | Min m/m | Produz. b/h |
|:---:|:----------------:|:------------:|:-------:|:--------------------:|:-------:|:-------:|:-----------:|
|  1  |   500 ml Piala   | 66,3 x 226,1 |   30    |          12          |   82    |   35    |   32.000    |
|  2  |   960 ml Piala   |  84 x 271,7  |  29,7   |                      |         |         |   27.000    |
|  3  | 1000 ml - Lipton | 84 x 270,21  |  29,7   |         12,6         |   79    |   42    |   30.000    |
|  4  | 1500 ml - Lipton | 93 x 320,21  |  29,7   |         20,5         |   48    |   29    |   18.500    |

Se tiltling length = 16,5m
Max => v = (16,5 m / ts )* 60
Min => bot speed 



### Promemoria:
***
* Cavo valvola modulante & scheda uscita?
* Disegno 3D per sinotico?