34 lines
976 B
Markdown
34 lines
976 B
Markdown
# SIMATIC ET 200SP Distributed I/O system
|
||
|
||
| | | | | |
|
||
|---|---|---|---|---|
|
||
|Document:|Distributed I/O system (11/2023, English)||||
|
||
|Type of topic:|Action|
|
||
|
||
|
||
|
||
Replacing an I/O module
|
||
|
||
|
||
|
||
#### Introduction
|
||
|
||
When an I/O module is installed for the first time, a part of the coding element clicks into the BaseUnit. When you replace an I/O module with the same type of module, the correct coding element is already present in the BaseUnit.
|
||
|
||
#### Requirement
|
||
|
||
Refer to section [Application planning](https://support.industry.siemens.com/cs/mdm/58649293?c=158604469259&lc=en-de&dl=en).
|
||
|
||
#### Replacing an I/O module
|
||
|
||
You have already removed the I/O module.
|
||
|
||
To replace an I/O module, follow these steps:
|
||
|
||
1. Remove the coding element (part) from the underside of the new I/O module.
|
||
2. Insert the new I/O module (same module type) into the BaseUnit until you hear it click into place.
|
||
3. Mark the new I/O module (labeling strip, equipment labeling plate).
|
||
|
||
|
||
|
||
--- |