2.4 KiB
Setup Photocell distance
Enter on the parameters Menu
Press SELECT
!Pasted image 20241205162522.png
Password: 4310
7 - Parameter to set the distance between the trigger photocell to the center of the pusher
- This distance can be changed to adjust the time to push the bottles. Setting a bigger time helps to push the bottle instead of leading.
Setup EXTERNAL SIGNAL timing
Enter on the parameters Menu
Press SELECT
!Pasted image 20241205162522.png
!Pasted image 20241209160400.png
External Signals Dist. Autodetect:
!Pasted image 20241209160441.png
-
After press Enter need to wait the expulsion signal from the camera. With this signal the machine will calculate the time automatically to the trigger photocell.
-
With the EXTERNAL SIGNALS DIST. AUTODETECT function the system automatically calculates the time and set the EXTERNAL SIGNAL1 DIST. (st): parameter. This time should be set carefully as the maximum allowable time because the Marken Telecamera does ==not always trigger with the same time==. If the telecamera takes longer to send the expulsion signal, Logic&Control might reject the ==wrong bottle== (next one). Therefore, set the shortest possible time to ensure the correct bottle is rejected. One method to determine this time is by using the autodetect feature and then reducing this distance with the minimal gap between bottles. On the factory testing we used 160 with a 200mm distance on a 22m/min speed.
!Pasted image 20241209160755.png
Logics & Control - Box:
!Pasted image 20241216082532.png
- 24 v
- 0 v
- X1.420: Camera Not Online - Reject All
- X1.47: Bottle expulsion signal
- X1.400: 0v - jumper on (2)
Markem IOBox Connections:
- ==Aggiornato 16/01/2025 - Markem a modificato il collegamento== - In vece di K2 adesso se utilizzano KA1 e KA2
- Markem.IOCabinet.EXT24out: 24v External <- Logic&Control.X1.24v
- Markem.IOCabinet.K2 : Expulsion ( 14.NO ) -> Logic&Control.X1.47
- Markem.IOCabinet.KA2 : Camera Online ( 12.NC ) -> Logic&Control.X1.420
Markem with 2 Telecamere
!Pasted image 20241216083846.png
A jump from (1) to (2) must be done to get the camere online signal from the Markem.IOCabinet.KA2
This is the Camera Online rele.