{
    "block_name": "TestLAD",
    "block_number": 2,
    "language": "LAD",
    "block_comment": "",
    "interface": {
        "Temp": [
            {
                "name": "All_Auto_RETVAL",
                "datatype": "Int"
            },
            {
                "name": "Reset_SP_Word_RETVAL",
                "datatype": "Int"
            },
            {
                "name": "mResetWaterTot",
                "datatype": "Bool"
            },
            {
                "name": "mResetSyrupTot",
                "datatype": "Bool"
            },
            {
                "name": "mResetCO2Tot",
                "datatype": "Bool"
            },
            {
                "name": "mResetProductTot",
                "datatype": "Bool"
            },
            {
                "name": "Block_Move_Err",
                "datatype": "Int"
            }
        ],
        "Return": [
            {
                "name": "Ret_Val",
                "datatype": "Void"
            }
        ]
    },
    "networks": [
        {
            "id": "9",
            "title": "Manual Syrup Drain Valve Open - Operator Alarm",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "30",
                    "uid": "30",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gSyrupRoomEn\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_"
                },
                {
                    "instruction_uid": "31",
                    "uid": "31",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {
                        "operand": true
                    },
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gIN_HVP301_Aux\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "30",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & ~v1_"
                },
                {
                    "instruction_uid": "32",
                    "uid": "32",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {
                        "operand": true
                    },
                    "inputs": {
                        "operand": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Blender_Parameters\".\"Processor_Options\".\"Blender_OPT\".\"_FastChangeOverEnabled\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "31",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & ~v1_ & ~v2_"
                },
                {
                    "instruction_uid": "33",
                    "uid": "33",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "24",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"Procedure_Variables\".\"FTP302Line_Preparation\".\"Done\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "32",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v3_ & ~v1_ & ~v2_"
                },
                {
                    "instruction_uid": "34",
                    "uid": "34",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {
                        "operand": true
                    },
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"Procedure_Variables\".\"Syr_RunOut\".\"Done\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "33",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v3_ & ~v1_ & ~v2_ & ~v4_"
                },
                {
                    "instruction_uid": "35",
                    "uid": "35",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "26",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gBlenderCIPMode\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "31",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v5_ & ~v1_"
                },
                {
                    "instruction_uid": "36",
                    "uid": "36",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "27",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gIN_CIP_CIPRunning\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "35",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v5_ & v6_ & ~v1_"
                },
                {
                    "instruction_uid": "37",
                    "uid": "37",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "28",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"Procedure_Variables\".\"Blender_Run\".\"Running\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "36",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v5_ & v6_ & v7_ & ~v1_"
                },
                {
                    "instruction_uid": "38",
                    "uid": "38",
                    "type": "O_sympy_processed",
                    "template_values": {
                        "Card": "Cardinality"
                    },
                    "negated_pins": {},
                    "inputs": {
                        "in1": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "34",
                            "source_pin": "out"
                        },
                        "in2": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "37",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy O: (v0_ & v5_ & v6_ & v7_ & ~v1_) | (v0_ & v3_ & ~v1_ & ~v2_ & ~v4_)"
                },
                {
                    "instruction_uid": "39",
                    "uid": "39",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "29",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gHVP301_Open\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "O",
                            "source_instruction_uid": "38",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "\"gHVP301_Open\" := (\"gSyrupRoomEn\" AND \"gBlenderCIPMode\" AND \"gIN_CIP_CIPRunning\" AND \"Procedure_Variables\".\"Blender_Run\".\"Running\" AND NOT \"gIN_HVP301_Aux\") OR (\"gSyrupRoomEn\" AND \"Procedure_Variables\".\"FTP302Line_Preparation\".\"Done\" AND NOT \"gIN_HVP301_Aux\" AND NOT \"HMI_Blender_Parameters\".\"Processor_Options\".\"Blender_OPT\".\"_FastChangeOverEnabled\" AND NOT \"Procedure_Variables\".\"Syr_RunOut\".\"Done\");"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "1A",
            "title": "Manual Syrup Drain Valve Open - Operator Alarm",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "25",
                    "uid": "25",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gIN_HVM302_Aux\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v8_"
                },
                {
                    "instruction_uid": "26",
                    "uid": "26",
                    "type": "Sd_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "25",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mHVM302_Dly\""
                        },
                        "tv": {
                            "uid": "23",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#1S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "25",
                            "source_instruction_type": "Contact",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"mHVM302_Dly\"(IN := \"gIN_HVM302_Aux\", PT := S5T#1S); // TODO: Declarar \"mHVM302_Dly\" : TON;"
                },
                {
                    "instruction_uid": "27",
                    "uid": "27",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "24",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gHVM302_Open\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Sd",
                            "source_instruction_uid": "26",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {},
                    "scl": "\"gHVM302_Open\" := \"mHVM302_Dly\".Q;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "2B",
            "title": "ResetTotalizer",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "24",
                    "uid": "24",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gBlendResetTotalizer\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v9_"
                },
                {
                    "instruction_uid": "25",
                    "uid": "25",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "24",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetTotalizerTmr\""
                        },
                        "tv": {
                            "uid": "23",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#2S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "24",
                            "source_instruction_type": "Contact",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mResetTotalizerTmr\"(IN := \"gBlendResetTotalizer\", PT := S5T#2S); // TODO: Declarar \"mResetTotalizerTmr\" : TP;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "3C",
            "title": "ResetWaterTot",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "26",
                    "uid": "26",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gFTN301_ResetTot\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v10_"
                },
                {
                    "instruction_uid": "27",
                    "uid": "27",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetTotalizerTmr\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v11_"
                },
                {
                    "instruction_uid": "28",
                    "uid": "28",
                    "type": "O_sympy_processed",
                    "template_values": {
                        "Card": "Cardinality"
                    },
                    "negated_pins": {},
                    "inputs": {
                        "in1": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "26",
                            "source_pin": "out"
                        },
                        "in2": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "27",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy O: v10_ | v11_"
                },
                {
                    "instruction_uid": "29",
                    "uid": "29",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "O",
                            "source_instruction_uid": "28",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetFTN301TotTmr\""
                        },
                        "tv": {
                            "uid": "24",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#2S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "28",
                            "source_instruction_type": "O",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"mResetFTN301TotTmr\"(IN := \"gFTN301_ResetTot\" OR \"mResetTotalizerTmr\", PT := S5T#2S); // TODO: Declarar \"mResetFTN301TotTmr\" : TP;"
                },
                {
                    "instruction_uid": "30",
                    "uid": "30",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "LocalVariable",
                            "type": "variable",
                            "name": "\"mResetWaterTot\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Se",
                            "source_instruction_uid": "29",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mResetWaterTot\" := \"mResetFTN301TotTmr\".Q;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "4D",
            "title": "ResetCO2Tot",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "27",
                    "uid": "27",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gFTP302_ResetTot\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v12_"
                },
                {
                    "instruction_uid": "28",
                    "uid": "28",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetTotalizerTmr\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v11_"
                },
                {
                    "instruction_uid": "29",
                    "uid": "29",
                    "type": "O_sympy_processed",
                    "template_values": {
                        "Card": "Cardinality"
                    },
                    "negated_pins": {},
                    "inputs": {
                        "in1": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "27",
                            "source_pin": "out"
                        },
                        "in2": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "28",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy O: v11_ | v12_"
                },
                {
                    "instruction_uid": "30",
                    "uid": "30",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "O",
                            "source_instruction_uid": "29",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetFTP302TotTmr\""
                        },
                        "tv": {
                            "uid": "24",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#2S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "29",
                            "source_instruction_type": "O",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"mResetFTP302TotTmr\"(IN := \"mResetTotalizerTmr\" OR \"gFTP302_ResetTot\", PT := S5T#2S); // TODO: Declarar \"mResetFTP302TotTmr\" : TP;"
                },
                {
                    "instruction_uid": "31",
                    "uid": "31",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gSyrupRoomEn\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Se",
                            "source_instruction_uid": "30",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v0_ & v23_"
                },
                {
                    "instruction_uid": "32",
                    "uid": "32",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "26",
                            "scope": "LocalVariable",
                            "type": "variable",
                            "name": "\"mResetSyrupTot\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "31",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mResetSyrupTot\" := \"gSyrupRoomEn\" AND \"mResetFTP302TotTmr\".Q;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "5E",
            "title": "ResetProductTot",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "26",
                    "uid": "26",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gFTM303_ResetTot\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v13_"
                },
                {
                    "instruction_uid": "27",
                    "uid": "27",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetTotalizerTmr\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v11_"
                },
                {
                    "instruction_uid": "28",
                    "uid": "28",
                    "type": "O_sympy_processed",
                    "template_values": {
                        "Card": "Cardinality"
                    },
                    "negated_pins": {},
                    "inputs": {
                        "in1": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "26",
                            "source_pin": "out"
                        },
                        "in2": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "27",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy O: v11_ | v13_"
                },
                {
                    "instruction_uid": "29",
                    "uid": "29",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "O",
                            "source_instruction_uid": "28",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetFTM303TotTmr\""
                        },
                        "tv": {
                            "uid": "24",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#2S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "28",
                            "source_instruction_type": "O",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"mResetFTM303TotTmr\"(IN := \"mResetTotalizerTmr\" OR \"gFTM303_ResetTot\", PT := S5T#2S); // TODO: Declarar \"mResetFTM303TotTmr\" : TP;"
                },
                {
                    "instruction_uid": "30",
                    "uid": "30",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "LocalVariable",
                            "type": "variable",
                            "name": "\"mResetCO2Tot\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Se",
                            "source_instruction_uid": "29",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mResetCO2Tot\" := \"mResetFTM303TotTmr\".Q;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "6F",
            "title": "ResetCO2Tot",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "26",
                    "uid": "26",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"gProductMFMResetTot\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v14_"
                },
                {
                    "instruction_uid": "27",
                    "uid": "27",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetTotalizerTmr\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v11_"
                },
                {
                    "instruction_uid": "28",
                    "uid": "28",
                    "type": "O_sympy_processed",
                    "template_values": {
                        "Card": "Cardinality"
                    },
                    "negated_pins": {},
                    "inputs": {
                        "in1": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "26",
                            "source_pin": "out"
                        },
                        "in2": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "27",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy O: v11_ | v14_"
                },
                {
                    "instruction_uid": "29",
                    "uid": "29",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "O",
                            "source_instruction_uid": "28",
                            "source_pin": "out"
                        },
                        "timer": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mResetProductTotTmr\""
                        },
                        "tv": {
                            "uid": "24",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#2S"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "28",
                            "source_instruction_type": "O",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"mResetProductTotTmr\"(IN := \"mResetTotalizerTmr\" OR \"gProductMFMResetTot\", PT := S5T#2S); // TODO: Declarar \"mResetProductTotTmr\" : TP;"
                },
                {
                    "instruction_uid": "30",
                    "uid": "30",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "LocalVariable",
                            "type": "variable",
                            "name": "\"mResetProductTot\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Se",
                            "source_instruction_uid": "29",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mResetProductTot\" := \"mResetProductTotTmr\".Q;"
                }
            ],
            "language": "LAD"
        },
        {
            "id": "80",
            "title": "Mod Copy Recipe",
            "comment": "",
            "logic": [
                {
                    "instruction_uid": "33",
                    "uid": "33",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "21",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Variables_Cmd\".\"Recipe\".\"Main_Page\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v15_"
                },
                {
                    "instruction_uid": "34",
                    "uid": "34",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {
                        "operand": true
                    },
                    "inputs": {
                        "operand": {
                            "uid": "22",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mFP_Recip_Main_Page\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "33",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v15_ & ~v16_"
                },
                {
                    "instruction_uid": "35",
                    "uid": "35",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "23",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mAux_FP_M700_1\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "34",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mAux_FP_M700_1\" := \"HMI_Variables_Cmd\".\"Recipe\".\"Main_Page\" AND NOT \"mFP_Recip_Main_Page\";"
                },
                {
                    "instruction_uid": "36",
                    "uid": "36",
                    "type": "Coil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "24",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mFP_Recip_Main_Page\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "33",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "\"mFP_Recip_Main_Page\" := \"HMI_Variables_Cmd\".\"Recipe\".\"Main_Page\";"
                },
                {
                    "instruction_uid": "37",
                    "uid": "37",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "25",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Variables_Cmd\".\"Recipe\".\"Main_Page\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v15_"
                },
                {
                    "instruction_uid": "38",
                    "uid": "38",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "26",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Variables_Cmd\".\"Recipe\".\"Edit\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "37",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v15_ & v17_"
                },
                {
                    "instruction_uid": "39",
                    "uid": "39",
                    "type": "Se_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "tv": {
                            "uid": "28",
                            "scope": "TypedConstant",
                            "type": "constant",
                            "datatype": "TypedConstant",
                            "value": "S5T#500ms"
                        },
                        "timer": {
                            "uid": "27",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"T_Pulse_Recipe_Edit\""
                        },
                        "s": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "38",
                            "source_pin": "out"
                        },
                        "en": {
                            "type": "connection",
                            "source_instruction_uid": "38",
                            "source_instruction_type": "Contact",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {
                        "q": []
                    },
                    "scl": "\"T_Pulse_Recipe_Edit\"(IN := \"HMI_Variables_Cmd\".\"Recipe\".\"Main_Page\" AND \"HMI_Variables_Cmd\".\"Recipe\".\"Edit\", PT := S5T#500ms); // TODO: Declarar \"T_Pulse_Recipe_Edit\" : TP;"
                },
                {
                    "instruction_uid": "40",
                    "uid": "40",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "29",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"T_Pulse_Recipe_Edit\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "SdCoil",
                            "source_instruction_uid": "39",
                            "source_pin": "q"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v18_ & v26_"
                },
                {
                    "instruction_uid": "41",
                    "uid": "41",
                    "type": "RCoil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "30",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Variables_Cmd\".\"Recipe\".\"Edit\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "40",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "IF \"T_Pulse_Recipe_Edit\" AND \"T_Pulse_Recipe_Edit\".Q THEN\n  \"HMI_Variables_Cmd\".\"Recipe\".\"Edit\" := FALSE;\nEND_IF;"
                },
                {
                    "instruction_uid": "42",
                    "uid": "42",
                    "type": "Contact_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "31",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"mAux_FP_M700_1\""
                        },
                        "in": {
                            "type": "powerrail"
                        }
                    },
                    "outputs": {
                        "out": []
                    },
                    "scl": "// SymPy Contact: v19_"
                },
                {
                    "instruction_uid": "43",
                    "uid": "43",
                    "type": "SCoil_sympy_processed",
                    "template_values": {},
                    "negated_pins": {},
                    "inputs": {
                        "operand": {
                            "uid": "32",
                            "scope": "GlobalVariable",
                            "type": "variable",
                            "name": "\"HMI_Variables_Cmd\".\"Recipe\".\"Edit\""
                        },
                        "in": {
                            "type": "connection",
                            "source_instruction_type": "Contact",
                            "source_instruction_uid": "42",
                            "source_pin": "out"
                        }
                    },
                    "outputs": {},
                    "scl": "IF \"mAux_FP_M700_1\" THEN\n  \"HMI_Variables_Cmd\".\"Recipe\".\"Edit\" := TRUE;\nEND_IF;"
                }
            ],
            "language": "LAD"
        }
    ]
}