CtrEditor.csproj

@@ -15,11 +15,6 @@
   </ItemGroup>
 
   <ItemGroup>
-    <None Remove="Icons\connect.png" />
-    <None Remove="Icons\disconnect.png" />
-    <None Remove="Icons\save.png" />
-    <None Remove="Icons\start.png" />
-    <None Remove="Icons\stop.png" />
     <None Remove="motor2.png" />
     <None Remove="tank.png" />
   </ItemGroup>
@@ -53,11 +48,6 @@
   </ItemGroup>
 
   <ItemGroup>
-    <Resource Include="Icons\connect.png" />
-    <Resource Include="Icons\disconnect.png" />
-    <Resource Include="Icons\save.png" />
-    <Resource Include="Icons\start.png" />
-    <Resource Include="Icons\stop.png" />
     <Resource Include="motor2.png" />
     <Resource Include="tank.png" />
   </ItemGroup>

MainViewModel.cs

@@ -38,10 +38,8 @@ namespace CtrEditor
         public ObservableCollection<string> listaImagenes { get; private set; }  // Publicación de las claves del diccionario        
         public ObservableCollection<TipoSimulable> ListaOsBase { get; } = new ObservableCollection<TipoSimulable>();
         private ObservableCollection<osBase> _objetosSimulables = new ObservableCollection<osBase>();
-        public PLCViewModel plcViewModelData;
+        public PLCViewModel _plcViewModelData;
         public Stopwatch stopwatch;
-        private bool isSimulationRunning;
-        private bool isConnected;
 
         public SimulationManagerFP simulationManager = new SimulationManagerFP();
 
@@ -51,11 +49,6 @@ namespace CtrEditor
         public ICommand StopSimulationCommand { get; }
         public ICommand ItemDoubleClickCommand { get; private set; }
 
-        public ICommand TBStartSimulationCommand { get; }
-        public ICommand TBStopSimulationCommand { get; }
-        public ICommand TBSaveCommand { get; }
-        public ICommand TBConnectPLCCommand { get; }
-        public ICommand TBDisconnectPLCCommand { get; }
 
         // Evento que se dispara cuando se selecciona una nueva imagen
         public event EventHandler<string> ImageSelected;
@@ -68,8 +61,8 @@ namespace CtrEditor
             datosDeTrabajo = new DatosDeTrabajo();
 
             // Inicializa el PLCViewModel
-            plcViewModelData = new PLCViewModel();
-            plcViewModelData.RefreshEvent += OnRefreshEvent;
+            _plcViewModelData = new PLCViewModel();
+            _plcViewModelData.RefreshEvent += OnRefreshEvent;
 
             InitializeTipoSimulableList();
 
@@ -82,12 +75,6 @@ namespace CtrEditor
             StartSimulationCommand = new RelayCommand(StartSimulation);
             StopSimulationCommand = new RelayCommand(StopSimulation);
 
-            TBStartSimulationCommand = new RelayCommand(StartSimulation, () => !IsSimulationRunning);
-            TBStopSimulationCommand = new RelayCommand(StopSimulation, () => IsSimulationRunning);
-            TBSaveCommand = new RelayCommand(Save);
-            TBConnectPLCCommand = new RelayCommand(ConnectPLC, () => !IsConnected);
-            TBDisconnectPLCCommand = new RelayCommand(DisconnectPLC, () => IsConnected);
-
             stopwatch = new Stopwatch();
         }
 
@@ -141,27 +128,6 @@ namespace CtrEditor
             }
         }
 
-        public bool IsSimulationRunning
-        {
-            get => isSimulationRunning;
-            set
-            {
-                isSimulationRunning = value;
-                OnPropertyChanged(nameof(IsSimulationRunning));
-                CommandManager.InvalidateRequerySuggested(); // Notificar que el estado de los comandos ha cambiado
-            }
-        }
-
-        public bool IsConnected
-        {
-            get => isConnected;
-            set
-            {
-                isConnected = value;
-                OnPropertyChanged(nameof(IsConnected));
-                CommandManager.InvalidateRequerySuggested();
-            }
-        }
 
         private void StartSimulation()
         {
@@ -172,14 +138,12 @@ namespace CtrEditor
 
             _timerSimulacion.Start();
             simulationManager.stopwatch.Start();
-            IsSimulationRunning = true;
         }
 
         private void StopSimulation()
         {
             _timerSimulacion.Stop();
             simulationManager.stopwatch.Stop();
-            IsSimulationRunning = false;
         }
 
         private void OnTickSimulacion(object sender, EventArgs e)
@@ -195,23 +159,10 @@ namespace CtrEditor
 
         }
 
-        private void ConnectPLC()
-        {
-            plcViewModelData.Connect();
-        }
-
-        private void DisconnectPLC()
-        {
-            plcViewModelData.Disconnect();
-            IsConnected = false;
-        }
-
         private void OnRefreshEvent(object sender, EventArgs e)
         {
-            if (plcViewModelData.IsConnected)
+            if (_plcViewModelData.IsConnected)
             {
-                if (!isConnected)
-                    IsConnected = true;
                 // Detener el cronómetro y obtener el tiempo transcurrido en milisegundos
                 stopwatch.Stop();
                 float elapsedMilliseconds = (float)stopwatch.Elapsed.TotalMilliseconds;
@@ -220,7 +171,7 @@ namespace CtrEditor
                 stopwatch.Restart();
 
                 foreach (var objetoSimulable in ObjetosSimulables)
-                    objetoSimulable.UpdatePLC(plcViewModelData.PLCInterface, (int) elapsedMilliseconds);
+                    objetoSimulable.UpdatePLC(_plcViewModelData.PLCInterface, (int) elapsedMilliseconds);
             } else
                 stopwatch.Stop();
 
@@ -255,10 +206,10 @@ namespace CtrEditor
 
         public PLCViewModel PLCViewModel
         {
-            get { return plcViewModelData; }
+            get { return _plcViewModelData; }
             set
             {
-                plcViewModelData = value;
+                _plcViewModelData = value;
                 OnPropertyChanged(nameof(PLCViewModel));
             }
         }
@@ -399,7 +350,7 @@ namespace CtrEditor
                             PixelToMeter.Instance.calc = simulationData.UnitConverter;
 
                             // Re-register to the events
-                            plcViewModelData.RefreshEvent += OnRefreshEvent;
+                            _plcViewModelData.RefreshEvent += OnRefreshEvent;
 
                             // Recorrer la colección de objetos simulables
                             foreach (var objetoSimulable in ObjetosSimulables)

MainWindow.xaml

@@ -9,35 +9,15 @@
         Height="900" Width="1600"
         ResizeMode="CanResize" Title="{Binding directorioTrabajo}">
 
-    <Window.DataContext>
-        <ctreditor:MainViewModel/>
-    </Window.DataContext>
-
     <Window.Resources>
         <convert:FloatToFormattedStringConverter x:Key="floatFormatter"/>
         <convert:BrushToColorNameConverter x:Key="BrushToColorNameConverter"/>
-
-        <!-- Style for Start/Stop Button -->
-        <Style x:Key="StartStopButtonStyle" TargetType="Button">
-            <Setter Property="Background" Value="Transparent"/>
-            <Style.Triggers>
-                <DataTrigger Binding="{Binding IsSimulationRunning}" Value="True">
-                    <Setter Property="Background" Value="LightGreen"/>
-                </DataTrigger>
-            </Style.Triggers>
-        </Style>
-
-        <!-- Style for Connect/Disconnect Button -->
-        <Style x:Key="ConnectDisconnectButtonStyle" TargetType="Button">
-            <Setter Property="Background" Value="Transparent"/>
-            <Style.Triggers>
-                <DataTrigger Binding="{Binding IsConnected}" Value="True">
-                    <Setter Property="Background" Value="LightGreen"/>
-                </DataTrigger>
-            </Style.Triggers>
-        </Style>
     </Window.Resources>
 
+    <Window.DataContext>
+        <ctreditor:MainViewModel/>
+    </Window.DataContext>
+
     <Grid>
         <!-- Menú Principal sobre toda la ventana -->
         <Menu VerticalAlignment="Top" HorizontalAlignment="Stretch">
@@ -80,47 +60,7 @@
 
             <!-- Segunda Columna -->
             <Grid Grid.Column="1">
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="Auto" />
-                    <RowDefinition Height="*" />
-                </Grid.RowDefinitions>
-
-                <ToolBarTray Grid.Row="0">
-                    <ToolBar>
-                        <Button Command="{Binding TBStartSimulationCommand}" ToolTip="Iniciar Simulación" Style="{StaticResource StartStopButtonStyle}">
-                            <StackPanel>
-                                <Image Source="Icons/start.png" Width="16" Height="16"/>
-                                <TextBlock Text="Iniciar"/>
-                            </StackPanel>
-                        </Button>
-                        <Button Command="{Binding TBStopSimulationCommand}" ToolTip="Detener Simulación">
-                            <StackPanel>
-                                <Image Source="Icons/stop.png" Width="16" Height="16"/>
-                                <TextBlock Text="Detener"/>
-                            </StackPanel>
-                        </Button>
-                        <Button Command="{Binding TBSaveCommand}" ToolTip="Guardar">
-                            <StackPanel>
-                                <Image Source="Icons/save.png" Width="16" Height="16"/>
-                                <TextBlock Text="Guardar"/>
-                            </StackPanel>
-                        </Button>
-                        <Button Command="{Binding TBConnectPLCCommand}" ToolTip="Conectar PLC" Style="{StaticResource ConnectDisconnectButtonStyle}">
-                            <StackPanel>
-                                <Image Source="Icons/connect.png" Width="16" Height="16"/>
-                                <TextBlock Text="Conectar"/>
-                            </StackPanel>
-                        </Button>
-                        <Button Command="{Binding TBDisconnectPLCCommand}" ToolTip="Desconectar PLC">
-                            <StackPanel>
-                                <Image Source="Icons/disconnect.png" Width="16" Height="16"/>
-                                <TextBlock Text="Desconectar"/>
-                            </StackPanel>
-                        </Button>
-                    </ToolBar>
-                </ToolBarTray>
-
-                <ScrollViewer Grid.Row="1" x:Name="ImagenEnTrabajoScrollViewer" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" PanningMode="Both">
+                <ScrollViewer x:Name="ImagenEnTrabajoScrollViewer" HorizontalScrollBarVisibility="Auto" VerticalScrollBarVisibility="Auto" PanningMode="Both">
                     <Canvas x:Name="ImagenEnTrabajoCanvas" Margin="20">
                         <!-- El Margin puede ser ajustado según el espacio adicional que quieras proporcionar -->
                         <Canvas.LayoutTransform>

ObjetosSim/UserControlFactory.cs

@@ -29,9 +29,6 @@ namespace CtrEditor.ObjetosSim
                 return new ucBoton();
             if (tipoObjeto == typeof(osTanque))
                 return new ucTanque();
-            if (tipoObjeto == typeof(osSensTemperatura))
-                return new ucSensTemperatura();
-
 
             // Puedes añadir más condiciones para otros tipos
 
@@ -56,8 +53,6 @@ namespace CtrEditor.ObjetosSim
                 return new osBoton();
             if (tipoObjeto == typeof(osTanque))
                 return new osTanque();
-            if (tipoObjeto == typeof(osSensTemperatura))
-                return new osSensTemperatura();
 
 
             // Puedes añadir más condiciones para otros tipos

ObjetosSim/osBase.cs

@@ -70,22 +70,6 @@ namespace CtrEditor.ObjetosSim
         public SimulationManagerFP simulationManager;
 
 
-        protected osBase ObtenerLink(string NameLink, Type tipoOsBase)
-        {
-            if (!string.IsNullOrEmpty(NameLink) && _mainViewModel != null)
-            {
-                foreach (var objetoSimulable in _mainViewModel.ObjetosSimulables)
-                {
-                    if (tipoOsBase.IsInstanceOfType(objetoSimulable) && ((osBase)objetoSimulable).Nombre == NameLink)
-                    {
-                        return (osBase)objetoSimulable;
-                    }
-                }
-            }
-            return null;
-        }
-
-
         public void CanvasSetLeftinMeter(float left)
         {
             if (_visualRepresentation != null)

ObjetosSim/ucSensTemperatura.xaml

@@ -1,33 +0,0 @@
-<UserControl x:Class="CtrEditor.ObjetosSim.ucSensTemperatura"
-             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-             xmlns:local="clr-namespace:CtrEditor.ObjetosSim"
-             mc:Ignorable="d"
-             xmlns:convert="clr-namespace:CtrEditor.Convertidores">
-
-    <UserControl.Resources>
-        <convert:MeterToPixelConverter x:Key="MeterToPixelConverter"/>
-    </UserControl.Resources>
-    <Grid>
-        <Border x:Name="BackgroundRectangle"
-                BorderBrush="Black"
-                BorderThickness="2"
-                Height="{Binding Alto, Converter={StaticResource MeterToPixelConverter}, ConverterParameter=1.5}"
-                VerticalAlignment="Top"
-                Background="Gray"
-                HorizontalAlignment="Center"
-                Width="{Binding Ancho, Converter={StaticResource MeterToPixelConverter}}">
-            <Grid>
-                <Slider 
-                    HorizontalAlignment="Center" 
-                    VerticalAlignment="Center"
-                    Height="{Binding Alto, Converter={StaticResource MeterToPixelConverter}}"
-                    Orientation="Vertical" 
-                    Value="{Binding Value}" 
-                    Maximum="100"/>
-            </Grid>
-        </Border>
-    </Grid>
-</UserControl>

ObjetosSim/ucSensTemperatura.xaml.cs

@@ -1,222 +0,0 @@
-using CtrEditor.Convertidores;
-using CtrEditor.Siemens;
-using Siemens.Simatic.Simulation.Runtime;
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Threading.Tasks;
-using System.Windows;
-using System.Windows.Controls;
-using System.Windows.Data;
-using System.Windows.Documents;
-using System.Windows.Input;
-using System.Windows.Media;
-using System.Windows.Media.Imaging;
-using System.Windows.Navigation;
-using System.Windows.Shapes;
-
-namespace CtrEditor.ObjetosSim
-{
-    /// <summary>
-    /// Interaction logic for ucSensTemperatura.xaml
-    /// </summary>
-    public class osSensTemperatura : osBase
-    {
-        // Otros datos y métodos relevantes para la simulación
-
-        private string _nombre = "Temperatura";
-        private float _ancho;
-        private float _alto;
-        private float _left;
-        private float _top;
-        private float _angulo;
-        private string _tag;
-        private float _value;
-        private float _max_OUT_Scaled;
-        private float _min_OUT_Scaled;
-
-        public string Tag
-        {
-            get => _tag;
-            set
-            {
-                if (_tag != value)
-                {
-                    _tag = value;
-                    OnPropertyChanged(nameof(Tag));
-                }
-            }
-        }
-
-        public float Min_OUT_Scaled
-        {
-            get => _min_OUT_Scaled;
-            set
-            {
-                _min_OUT_Scaled = value;
-                OnPropertyChanged(nameof(Min_OUT_Scaled));
-            }
-        }
-        public float Max_OUT_Scaled
-        {
-            get => _max_OUT_Scaled;
-            set
-            {
-                _max_OUT_Scaled = value;
-                OnPropertyChanged(nameof(Max_OUT_Scaled));
-            }
-        }
-
-        public float Value
-        {
-            get => _value;
-            set
-            {
-                _value = value;
-                OnPropertyChanged(nameof(Value));
-            }
-        }
-        public override float Left
-        {
-            get => _left;
-            set
-            {
-                _left = value;
-                CanvasSetLeftinMeter(value);
-                OnPropertyChanged(nameof(Left));
-            }
-        }
-        public override float Top
-        {
-            get => _top;
-            set
-            {
-                _top = value;
-                CanvasSetTopinMeter(value);
-                OnPropertyChanged(nameof(Top));
-            }
-        }
-
-        public float Ancho
-        {
-            get => _ancho;
-            set
-            {
-                _ancho = value;
-                OnPropertyChanged(nameof(Ancho));
-            }
-        }
-        public float Alto
-        {
-            get => _alto;
-            set
-            {
-                _alto = value;
-                OnPropertyChanged(nameof(Alto));
-            }
-        }
-
-        public float Angulo
-        {
-            get => _angulo;
-            set
-            {
-                _angulo = value;
-                OnPropertyChanged(nameof(Angulo));
-            }
-        }
-
-        public override string Nombre
-        {
-            get => _nombre;
-            set
-            {
-                if (_nombre != value)
-                {
-                    _nombre = value;
-                    OnPropertyChanged(nameof(Nombre));
-                }
-            }
-        }
-
-        public osSensTemperatura()
-        {
-            Ancho = 0.4f;
-            Alto = 1f;
-            Max_OUT_Scaled = 27648;
-            Min_OUT_Scaled = 0;
-        }
-
-        public override void UpdateGeometryStart()
-        {
-            // Se llama antes de la simulacion
-
-        }
-        public override void UpdateGeometryStep()
-        {
-        }
-        public override void UpdatePLC(PLCModel plc, int elapsedMilliseconds)
-        {
-            if (Tag.Length > 0)
-            {
-                SDataValue s = new SDataValue();
-                s.UInt16 = (ushort)((Value / 100.0 * Max_OUT_Scaled) + Min_OUT_Scaled);
-                plc.EscribirTag(Tag, s);
-            }
-        }
-
-        public override void UpdateControl()
-        {
-
-        }
-        public override void ucLoaded()
-        {
-            // El UserControl ya se ha cargado y podemos obtener las coordenadas para 
-            // crear el objeto de simulacion
-        }
-
-    }
-
-    public partial class ucSensTemperatura : UserControl, IDataContainer
-    {
-        public osBase? Datos { get; set; }
-
-        public ucSensTemperatura()
-        {
-            InitializeComponent();
-            this.Loaded += OnLoaded;
-        }
-        private void OnLoaded(object sender, RoutedEventArgs e)
-        {
-            Datos?.ucLoaded();
-        }
-        public void Resize(float width, float height)
-        {
-            if (Datos is osSensTemperatura datos)
-            {
-                datos.Ancho = PixelToMeter.Instance.calc.PixelsToMeters(width);
-                datos.Alto = PixelToMeter.Instance.calc.PixelsToMeters(width);
-            }
-        }
-        public void Move(float LeftPixels, float TopPixels)
-        {
-            if (Datos != null)
-            {
-                Datos.Left = PixelToMeter.Instance.calc.PixelsToMeters(LeftPixels);
-                Datos.Top = PixelToMeter.Instance.calc.PixelsToMeters(TopPixels);
-            }
-        }
-        public void Rotate(float Angle)
-        {
-            if (Datos != null)
-                if (Datos is osSensTemperatura datos)
-                    datos.Angulo = Angle;
-        }
-        public void Highlight(bool State) { }
-        public int ZIndex()
-        {
-            return 10;
-        }
-    }
-}

ObjetosSim/ucTanque.xaml

@@ -18,16 +18,8 @@
                Source="/tank.png"
                Width="{Binding Alto, Converter={StaticResource MeterToPixelConverter}}"
                Height="{Binding Ancho, Converter={StaticResource MeterToPixelConverter}}"
-               Stretch="Uniform">
-        </Image>
-        <Slider 
-                    HorizontalAlignment="Left" 
-                    VerticalAlignment="Center"
-                    Height="{Binding Alto, Converter={StaticResource MeterToPixelConverter}}"
-                    Orientation="Vertical" 
-                    Value="{Binding Level}" 
-                    Maximum="100"/>
-
+               Stretch="Uniform"/>
+       
         <Rectangle x:Name="WaterLevel"
                    Fill="Blue"
                    VerticalAlignment="Bottom"
@@ -42,7 +34,6 @@
                 </MultiBinding>
             </Rectangle.Height>
         </Rectangle>
-        
         <Label Content="{Binding Level}" HorizontalAlignment="Center" Margin="10,10,0,0" VerticalAlignment="Top"/>
     </Grid>
 </UserControl>

ObjetosSim/ucTanque.xaml.cs

@@ -1,6 +1,5 @@
 using CtrEditor.Convertidores;
 using CtrEditor.Siemens;
-using Newtonsoft.Json.Linq;
 using OpenCvSharp.Flann;
 using Siemens.Simatic.Simulation.Runtime;
 using System;
@@ -35,8 +34,7 @@ namespace CtrEditor.ObjetosSim
         private float _angulo;
         private float _level;
         private string _tag;
-        private float _max_OUT_Scaled;
-        private float _min_OUT_Scaled;
+
 
         public string Tag
         {
@@ -50,27 +48,6 @@ namespace CtrEditor.ObjetosSim
                 }
             }
         }
-
-        public float Min_OUT_Scaled
-        {
-            get => _min_OUT_Scaled;
-            set
-            {
-                _min_OUT_Scaled = value;
-                OnPropertyChanged(nameof(Min_OUT_Scaled));
-            }
-        }
-        
-        public float Max_OUT_Scaled
-        {
-            get => _max_OUT_Scaled;
-            set
-            {
-                _max_OUT_Scaled = value;
-                OnPropertyChanged(nameof(Max_OUT_Scaled));
-            }
-        }
-
         public float Level
         {
             get => _level;
@@ -148,8 +125,6 @@ namespace CtrEditor.ObjetosSim
         {
             Ancho = 0.30f;
             Alto = 0.30f;
-            Max_OUT_Scaled = 27648;
-            Min_OUT_Scaled = 0;
         }
 
         public override void UpdateGeometryStart()
@@ -165,7 +140,7 @@ namespace CtrEditor.ObjetosSim
             if (Tag.Length > 0)
             {
                 SDataValue s = new SDataValue();
-                s.UInt16 = (ushort)((Level / 100.0 * Max_OUT_Scaled) + Min_OUT_Scaled);
+                s.UInt16 = (ushort)(Level / 100.0 * 26600);
                 plc.EscribirTag(Tag, s);
             }
         }

ObjetosSim/ucTransporteGuias.xaml.cs

@@ -196,17 +196,24 @@ namespace CtrEditor.ObjetosSim
         public override void UpdateControl()
         {
         }
-        public override void UpdatePLC(PLCModel plc, int elapsedMilliseconds)
+        public override void UpdatePLC(PLCModel plc, int elapsedMilliseconds) 
         {
             if (_osMotor != null)
             {
                 if (_osMotor is osVMmotorSim motor)
                     VelocidadActual = motor.Velocidad;
+            } else
+            {
+                if (Motor.Length > 0)
+                    if (_mainViewModel != null)
+                        foreach (var objetoSimulable in _mainViewModel.ObjetosSimulables)
+                            if (objetoSimulable.Nombre == _motor)
+                            {
+                                _osMotor = objetoSimulable;
+                                break;
+                            }
             }
-            else
-                _osMotor = ObtenerLink(_motor, typeof(osVMmotorSim));
         }
-
         public override void ucLoaded()
         {
             // El UserControl ya se ha cargado y podemos obtener las coordenadas para 

ObjetosSim/ucTransporteTTop.xaml.cs

@@ -153,7 +153,16 @@ namespace CtrEditor.ObjetosSim
                     VelocidadActual = motor.Velocidad;
             }
             else
-                _osMotor = ObtenerLink(_motor, typeof(osVMmotorSim));
+            {
+                if (Motor.Length > 0)
+                    if (_mainViewModel != null)
+                        foreach (var objetoSimulable in _mainViewModel.ObjetosSimulables)
+                            if (objetoSimulable.Nombre == _motor)
+                            {
+                                _osMotor = objetoSimulable;
+                                break;
+                            }
+            }
         }
 
         public override void UpdateControl()

Siemens/PLCControl.xaml.cs

@@ -104,24 +104,17 @@ namespace CtrEditor.Siemens
 
         public void Connect()
         {
-            try
-            {
-                // Implementa la conexión utilizando PLCModel
-                PLCInterface.Instance = SimulationRuntimeManager.CreateInterface(Name);
-                PLCInterface.Instance.OnSoftwareConfigurationChanged += Instance_OnSoftwareConfigurationChanged;
-                //_plcModel.Instance.CommunicationInterface = ECommunicationInterface.Softbus;
+            // Implementa la conexión utilizando PLCModel
+            PLCInterface.Instance = SimulationRuntimeManager.CreateInterface(Name);
+            PLCInterface.Instance.OnSoftwareConfigurationChanged += Instance_OnSoftwareConfigurationChanged;
+            //_plcModel.Instance.CommunicationInterface = ECommunicationInterface.Softbus;
 
-                if (PLCInterface.Instance != null)
-                {
-                    PLCInterface.UpdateTagList();
-                    _timer.Start();
-                    ConnectionStatus = "connected";
-                    IsConnected = true;
-                }
-            } catch (Exception ex)
+            if (PLCInterface.Instance != null)
             {
-                LastError = ex.Message;
-                ConnectionStatus = "offline";
+                PLCInterface.UpdateTagList();
+                _timer.Start();
+                ConnectionStatus = "connected";
+                IsConnected = true;
             }
         }
 

Simulacion/FPhysics.cs

@@ -12,7 +12,6 @@ using CtrEditor.Convertidores;
 using FarseerPhysics.Common;
 using System.Windows;
 using System.Diagnostics;
-using System.Windows.Documents;
 
 namespace CtrEditor.Simulacion
 {
@@ -183,32 +182,7 @@ namespace CtrEditor.Simulacion
             if (fixtureB.Body.UserData is simRectangle)
             {
                 simRectangle conveyor = fixtureB.Body.UserData as simRectangle;
-                CircleShape circleShape = fixtureA.Shape as CircleShape;
-                PolygonShape polygonShape = fixtureB.Shape as PolygonShape;
-
-                // Obtener centro y radio del círculo
-                Vector2 centroCirculo = fixtureA.Body.Position;
-                float radio = circleShape.Radius;
-
-                // Obtener los vértices del polígono (rectángulo)
-                Vector2[] vertices = new Vector2[polygonShape.Vertices.Count];
-                float cos = (float)Math.Cos(fixtureB.Body.Rotation);
-                float sin = (float)Math.Sin(fixtureB.Body.Rotation);
-
-                for (int i = 0; i < polygonShape.Vertices.Count; i++)
-                {
-                    Vector2 vertex = polygonShape.Vertices[i];
-                    float rotatedX = vertex.X * cos - vertex.Y * sin + fixtureB.Body.Position.X;
-                    float rotatedY = vertex.X * sin + vertex.Y * cos + fixtureB.Body.Position.Y;
-                    vertices[i] = new Vector2(rotatedX, rotatedY);
-                }
-
-                // Calcular el porcentaje de la superficie compartida
-                float porcentajeCompartido = InterseccionCirculoRectangulo.CalcularSuperficieCompartida(vertices, centroCirculo, radio);
-
-                // Aplicar el efecto del transportador usando el porcentaje calculado
-                ApplyConveyorEffect(conveyor, fixtureA, porcentajeCompartido);
-
+                ApplyConveyorEffect(conveyor, fixtureA);
                 return true; // No aplicar respuestas físicas
             }
             return true; // No aplicar respuestas físicas
@@ -219,11 +193,11 @@ namespace CtrEditor.Simulacion
             // Aquí puedes restablecer cualquier estado si es necesario al separarse de un simRectangle
         }
 
-        private void ApplyConveyorEffect(simRectangle conveyor, Fixture circleFixture, float porcentajeCompartido)
+        private void ApplyConveyorEffect(simRectangle conveyor, Fixture circleFixture)
         {
             float speedMetersPerSecond = conveyor.Speed / 60.0f;
             Vector2 desiredVelocity = new Vector2((float)Math.Cos(conveyor.Body.Rotation), (float)Math.Sin(conveyor.Body.Rotation)) * speedMetersPerSecond;
-            circleFixture.Body.LinearVelocity += desiredVelocity * porcentajeCompartido;
+            circleFixture.Body.LinearVelocity = desiredVelocity;
         }
     }
 

Simulacion/InterseccionCirculoRectangulo.cs

@@ -1,73 +0,0 @@
-using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
-using System.Threading.Tasks;
-using FarseerPhysics.Collision;
-using Microsoft.VisualBasic.Devices;
-using Microsoft.Xna.Framework;
-
-namespace CtrEditor.Simulacion
-{
-    internal class InterseccionCirculoRectangulo
-    {
-        // Definición de la función CalcularSuperficieCompartida
-        public static float CalcularSuperficieCompartida(Vector2[] vertices, Vector2 center, float r)
-        {
-            float totalCircleArea = (float)Math.PI * r * r;
-
-            // Distancia a líneas ajustado
-            float[] distances = new float[4];
-            for (int i = 0; i < 4; i++)
-            {
-                distances[i] = DistanceFromLine(center, vertices[i], vertices[(i + 1) % 4]);
-            }
-
-            float minDistance = float.MaxValue;
-            foreach (var dist in distances)
-            {
-                if (Math.Abs(dist) < Math.Abs(minDistance))
-                    minDistance = dist;
-            }
-            float d = Math.Abs(minDistance);
-
-            float sharedArea = 0;
-            if (Array.TrueForAll(distances, dist => Math.Abs(dist) > r))
-            {
-                sharedArea = totalCircleArea;
-            }
-            else if (d < r)
-            {
-                float cosTheta = Math.Min(1, d / r);
-                float sinTheta = (float)Math.Sqrt(Math.Max(0, r * r - d * d));
-                if (minDistance < 0) // El centro está dentro del rectángulo
-                {
-                    float areaOutside = r * r * (float)Math.Acos(cosTheta) - d * sinTheta;
-                    sharedArea = totalCircleArea - areaOutside;
-                }
-                else // El centro está fuera del rectángulo
-                {
-                    sharedArea = r * r * (float)Math.Acos(cosTheta) - d * sinTheta;
-                }
-            }
-            else
-            {
-                sharedArea = 0;
-            }
-
-            return sharedArea / totalCircleArea;
-        }
-
-        public static float DistanceFromLine(Vector2 point, Vector2 start, Vector2 end)
-        {
-            float A = end.Y - start.Y;
-            float B = start.X - end.X;
-            float C = end.X * start.Y - start.X * end.Y;
-            float distance = (A * point.X + B * point.Y + C) / (float)Math.Sqrt(A * A + B * B);
-            return distance;
-        }
-
-    }
-}
-
-