Obsidean_VM/03-Revised/9.... Nuovo Ordine - Logoplast - NFC Batch/Notes for Updating the HMI Projects.md

## For setup the WinCC Tia Portal:


#### RFID LOGON: - RF1060R and Option+
***

#### Enable OPC-Server on the HMI:
 
![[Pasted image 20231023134819.png]]


* Copy the tags `06_Option+_PMLogon` from the example project
	* ![[Pasted image 20231024170948.png]]

* Copy the Scripts: `PMLOGON_UID_Changed` and `UpdatePopUp` 

* Change the Update Event of the PLC Time tag:
 ![[Pasted image 20231024171057.png]]

Copy the Text field 3 on Layer_12 on the Template to have the message for the User Logged:

![[Pasted image 20231024172004.png]]

##### Creating all user on the HMI Panel:
***
We must to delete all users except the Superuser. The Superuser must have a new password and this user it will be used for seting up all the operators on the HMI Panel.
Then all the UID can be read with the AccessControlDemo and the UID without the 0x will be the password to be used for every user/card.

##### Creating users on the Tia Portal
***
Using the DEMO software AccessControlDemo and inverting the UID 

![[Pasted image 20231023170326.png]]

The UID can be read and then on the user admin of the Tia Portal can be created all the necessary's users with the password replaced by the UID

![[Pasted image 20231023170944.png]]



The documentation of reference is: 3.7 from SimaticHMIOptionPlus : https://1drv.ms/b/s!Ap46vAtZDpwSiro8IljITp1twd6WEw?e=UReKIQ


### AUDIT - GMP 
***


* Enable GMP

![[Pasted image 20231020161702.png]]


### Audit report

https://support.industry.siemens.com/cs/mdm/109096785?c=24425383435&dl=en&lc=es-CO



![[Pasted image 20231020164328.png]]
* Every tag that need to be tracked

![[Pasted image 20231024100007.png]]
* Must be added one item on the Historical data
* Select where to save the data and the type of file

![[Pasted image 20231024100616.png]]
![[Pasted image 20231024100628.png]]

#### Storage location
- Storage location
    You can choose between:
    - RDB file
    - a CSV file (ASCII)
    - a TXT file (Unicode)
- Path
    Depending on the HMI device, enter the storage location of the Audit Trail under "Path".
- Minimum space in MB
    Specify the size of remaining storage space that triggers the "Little available memory" event.

#### Inspector window settings
***
You can set the following parameters under "Audit trail > Properties > Properties > Settings":

Logging activation
- Enable logging at runtime start
Forcing
- Bypass electronic signature
    Specifies whether the administrator is permitted to run operator actions without entering an electronic signature or comments.
- Forcing allowed if storage space is exhausted
    This function allows the administrator to interrupt audit trail logging in the following scenarios:
    - There is no free storage space available.
    - The storage medium is missing.
    - Access to required storage medium is not possible.
    
    You can thus prevent the process from stopping.
    After Forcing was carried out, the audit trail log switches off.
    After the end of "Forcing", the audit trail must be restarted with the system function "StartLogging".




#### The Scripts:
***
```pascal
Sub PMLOGON_UID_Changed()

Dim Panel_LogonUid_Value
Panel_LogonUid_Value = SmartTags("Panel_LogonUid")

' Card not available
If Panel_LogonUid_Value = "-1" Then
	Logoff
	SmartTags("StatusRFID") = 0
	
' Card available	
Else
	Dim Password
	Password = Panel_LogonUid_Value
    Logon Password, "UserName"
    SmartTags("StatusRFID") = 1
    GetUserName "CurrentUser"  
    
' User does not exist   
	Dim s_user
	Dim lenght
	s_user = SmartTags("CurrentUser")
	lenght = Len(s_user)
	
	If lenght < 1 Then
		 SmartTags("StatusRFID") = 2
		 ActivateScreen "901- Utenti",901
	Else
		SmartTags("PopUpLogon") = 5 
	End If    
End If

End Sub
```

```pascal
Sub UpdatePopUp()

   If SmartTags("PopUpLogon") > 0 Then
   		SmartTags("PopUpLogon") = SmartTags("PopUpLogon") - 1
   End If

End Sub
```

`SmartTags("PopUpLogon") = 5 ` this set the second that the message of user logged is active


### To resolve the problem when the superuser login with the normal way and then the last batch user try to login

* On the template add this event to clear the Tag used for the Option+ to login
![[Pasted image 20231026104046.png]]