Obsidean_VM/03-Revised/9.... Nuovo Ordine - Logop.../Notes.md

85 lines
2.1 KiB
Markdown
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Il nuovo lavoro consiste nellinserire un “Card Reader” ed il tracking delle modifiche dati hmi(GMP) eseguendo dei test sul programma di una linea esistente nel progetto di Tabler Station.
#### Ti anticipo che:
***
Nello stabilimento abbiamo più di 16 linee di cui il 95% sono state fatte con i seguenti programmi:
* Plc Step7 V5.5
* Hmi Tia Portal V13
1- Capire quale Tia Portal usare (Il lettore tessere può essere installato con lutilizzo di Tia Portal >15) in modo da mantenere la possibilità di simulare i software(Compatibilità programmi siemens-piattaforme siemens).
2- Verificare se il limite sia veramente il Tia 15 e se occorre aggiornare il firmware dei pannelli
3- Capire le tempistiche per fare una Linea in modo da poter calcolare lofferta.
Se ti serve ho la disponibilità dei seguenti componenti:
***
* Cpu s7300
* Hmi TP700
* Lettore tessere
* 1 Tessera
Ti ho caricato nella nostra cartella di scambio i seguenti dati:
* Info Siemens per Option+ complete di progetto esempio
* Software linea con divisore (92656), ==consiglio questa  per le prove.==
* Software linea senza divisore (92657)
# SIMATIC Ident Configuration Guide
***
https://support.industry.siemens.com/cs/document/67384964/simatic-ident-configuration-guide?dti=0&lc=en-IT
* Abbiamo il RF1060R
* MDS D100
#### Download of the "Ident profile" S7 block
https://support.industry.siemens.com/cs/document/109476945/download-of-the-ident-profile-s7-block?dti=0&lc=en-IT
The function Iden profile can be run on S7300
### Guide:
![[Ident_Configuration_Guide_2022-07.pdf]]
### On Tia V13
https://support.industry.siemens.com/cs/mdm/109096785?c=22024143371&dl=en&lc=es-CO
* Enable GMP
![[Pasted image 20231020161702.png]]
### Audit report
https://support.industry.siemens.com/cs/mdm/109096785?c=24425383435&dl=en&lc=es-CO
* Every tag
![[Pasted image 20231020164328.png]]
#### PLC S315:
![[Pasted image 20231023112416.png]]
![[Pasted image 20231023115554.png]]
#### Administrator User
****
For bypassing the Audit is possible to have a User from the User administrator group that can disable the Audit logic
![[Pasted image 20240109135314.png]]