1.4 KiB
1.4 KiB
#AllenBradley
From Tody:
Hmi PVP_A45140
Desktop system passwords
Administrator : 82549
Runtime factory talk
Pass RunTime: L82549m/
Domanda sicurezza: In quale azienda lavori?
Risposta: vetromeccanica
Pass VNC 100
1-The first startup we need to calibrate the Touch and set the panel password:
password: Vetromeccanica24
After this we set the IP
2-Set the IP on the PLC:
Press Disable BOOTP to save the IP on the EPPROM:
Best way is to only connect to the device you want to set the ip. Then we Add Relation on the Boot DHCP Tool from Rockwell.
3-Then we need to start the Firmware client on the PanelView
==For selecting the firmware we need to check our software version. == If we have a FactoryTalk v13 the maximun firmaware version will be 13.7. This can be checked in the Rockwell Software, under the "Software" tab and then selecting "Version Information".
4-Then we update the firmware of the PLC using the ControlFLASH Plus:
- After give the IP to the panel
- ==Need to Start the Firmware update from the panel==
- Start the update on the ControlFLASH Plus
Desktop Access Password
!Pasted image 20240930115247.png
Vetromeccanica24 Vetromeccanica24 Vetromeccanica Vetromeccanica24