Obsidean_VM/01-Documentation/Vetromeccanica/EMD Guides/FB223 - Guide EMD.md

52 lines
1.7 KiB
Markdown

![[Pasted image 20250130101306.png|800]]
Modified this Aux_Open_1 & Aux_Close_1 Default value to allow start after the creation of new DBs.
This guides use 2 pulses to go in the close direction and 2 pulses to go in the open direction.
![[Pasted image 20250130104639.png|800]]
==need to be finish== ...
(5) Time to wait with the valves open : air on the pistons
(6) Time to wait between pulses. This time allows the system to recuperate air flow and pressure before the next pulse.
(7) Pulses to overopen after the system arrive to the all open position. The open position arrive when the (1) Conter Impulse is = 0. This number is substracted to the Counter_Position (1) before start opening.
(8) Distance between guides after the system do the homing ( all open ) position.
(9) This are the pressure sensors of each area. The system normally can command 10 areas at the same time.
(10) This are the outputs to the valves. The Yellow/Blu for the opening and the White/Black for the close.
The functioning can be auto / manual.
The logic of the FB use the Counter Impulse as the misure of the guides. The
The setup button can be used to reset the guides. The FB will open the guides all the way out and then will count the Reset ON pulses after it reaches the 0 on the Counter Impulse.
![[Pasted image 20250130104223.png]]
![[Pasted image 20250130104213.png]]
![[Pasted image 20240402162511.png|800]]
![[20240402_160111.jpg|800]]
![[20240402_160101.jpg|800]]
![[20240402_160051.jpg|800]]
![[20240402_155914.jpg|800]]
![[20240402_155834.jpg|800]]
![[20240402_155844.jpg|800]]
![[20240402_154350.jpg|800]]
![[20240402_155914 1.jpg|800]]
![[20240402_154332.jpg|800]]