Obsidean_VM/03-Revised/93762 - Clevertech USA - VetroPET Oil/Inputs-Outputs.md

///////////////////////   Motors     ////////////////////////

//ingressi motore M231 - M20160
if Motor[1].Presence then
	CPS(M20160:I,Motor[1].Drive.Telegram.I,1);
	Motor[1].I.CircuitBreaker:=IO45340.0; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[1].I.Thermic:=1;
 	Motor[1].I.Pht1:=IO45341.0;  // B50010

end_if;

//ingressi motore M232
if Motor[2].Presence then
	CPS(M20260:I,Motor[2].Drive.Telegram.I,1);
	Motor[2].I.CircuitBreaker:=IO45340.1; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[2].I.Thermic:=1;
	Motor[2].I.Sn1:=IO45341.2; // S50030 PROD SPEED ALIGNER
	Motor[2].I.Sn2:=IO45341.3; // S50040 MIN ACCUM ALIGNER
end_if;

//ingressi motore M233
if Motor[3].Presence then
	CPS(M20360:I,Motor[3].Drive.Telegram.I,1);
	Motor[3].I.CircuitBreaker:=IO45340.2; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 

end_if;

//ingressi motore M234
if Motor[4].Presence then
	CPS(M20460:I,Motor[4].Drive.Telegram.I,1);	
	Motor[4].I.CircuitBreaker:=IO45340.3; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[4].I.Thermic:=1;
	Motor[4].I.Pht1:=IO45341.5; // B50060 FALLEN BOTTLE HIGH CONTROL
	Motor[4].I.Pht2:=IO45341.6; // B50070 FALLEN BOTTLE LOW CONTROL
	Motor[4].I.Pht3:=IO45350.0; // B50110 ALIGNER FULL
	Motor[4].I.Pht4:=IO45350.1; // B50120 JAMMINH CONTROL ALIGNER

end_if;

//ingressi motore M235
if Motor[5].Presence then
	CPS(M20560:I,Motor[5].Drive.Telegram.I,1);
	Motor[5].I.CircuitBreaker:=IO45340.4; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[5].I.Thermic:=1;

end_if;

//ingressi motore M236
if Motor[6].Presence then
	CPS(M20660:I,Motor[6].Drive.Telegram.I,1);
	Motor[6].I.CircuitBreaker:=IO45340.5; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[6].I.Thermic:=1;
	Motor[6].I.Pht1:=IO45350.4;	// B50150 ACCUM M20660

end_if;

//ingressi motore M237
if Motor[7].Presence then
	CPS(M20760:I,Motor[7].Drive.Telegram.I,1);
	Motor[7].I.CircuitBreaker:=IO45340.6; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[7].I.Thermic:=1;
	Motor[7].I.Pht1:=IO45351.1;  // B50220 ACCUM M20760 LEFT
	Motor[7].I.Pht2:=IO45351.4;  // B50250 ACCUM M20760 RIGHT

	Motor[7].I.Sn1:=IO45351.2; 		// S50230 CHANNEL RH DIVIER M20760-M23160
	Motor[7].I.Sn2:=IO45351.5; 		// S50260 CHANNEL LH DIVIER M20860-M27460

end_if;

//ingressi motore M238
if Motor[8].Presence then
	CPS(M20860:I,Motor[8].Drive.Telegram.I,1);
	Motor[8].I.CircuitBreaker:=IO45340.7; // Added direct plc input as disconnector feedback cable removed //Motor[1].Drive.Telegram.I.DigIn3Active; 
    Motor[8].I.Thermic:=1;

end_if;

////////////////////////   External Signals     ////////////////////////

//segnali esterni Depal
if  ExtMachine[KDepal].Presence then
	ExtMachine[KDepal].I.Signal_0:=IO45360.0;  // DEPAL RUNNING
	ExtMachine[KDepal].I.Signal_1:=IO45360.1;  // DEPAL IN ALLARM
	ExtMachine[KDepal].I.Signal_2:=IO45360.2;  // DEPAL SPARE

end_if;