1.5 KiB
Notes on the order:
• A meeting on site is planned to review/evaluate and define the synchronization of the operation of the two Labelers (existing MCC and new PE). • It will be necessary, before realizing the software, to verify that the MCC's min/nominal/max speeds are in line with those of PE. • The choice of operation (PE / MCC) will be through supervision and not locally. • The transports will indicate to MCC and PE to increase/decrease speed based on the accumulation on the line and the Labelers will confirm the speed to the VM transports.
To do list:
Change CPU on Q3 of TL22 : 1515-2 PN for the actual 1513 CPU
- Change SD on Q3
- Change SD on supervisor PLC to 32MB.
- Change SD on the Backup PLC to 32MB.
- Define one bit for the Remote mode selection for the Labeller:
- Can be di10.x[6] : if this bit is 0 means LC Enabled - 1: means PE Enabled
Q3 PLC - Modification
Added Selector Panel
Th FC2101 Network 6 was modified to allow the selection of labelers in local mode or in Remote mode.
Was added the DB Setup Labeller-Loc-Rem
to remembers the selection.
!Pasted image 20231017094044.png FC2101-N6
!Pasted image 20231017105601.png FC173-N8 Created two new warning for showing the selection.
New Formats:
We dont know the speed of the new PE Labeller so this info must be updated on site to control the speeds of the merger near M98.