2.9 KiB
2.9 KiB
241GM - pag 241
!Pasted image 20250313130357.png
!
!
!
!Pasted image 20250313125925.png
!
| FEm | Motor | Motor | Male | ==PLC - Cabinet== |
|---|---|---|---|---|
| 1 | Gnd | Blue | 2 | Blue-Red |
| 2 | +24v | Brown | 1 | Brown |
| 3 | OUT Outwards | Yellow | 7 | Green |
| 4 | OUT Inwards | Green | 6 | Yellow |
| 5 | IN Retract | Red | 5 | Black |
| 6 | IN Extend | Black | 4 | Red |
| 7 | Analog- | Orange | 3 | White |
| x | Analog+ | LightBlue | x | Blue |
!
!Pasted image 20250313150710.png
LINAK LA25IO Actuator Specifications
Model: 250601000000CB2B=A2ACZA0000210
| Parameter | Specification |
|---|---|
| General Information | |
| Model | LA25IO |
| Type | 250601000000CB2B=A2ACZA0000210 |
| Item No. | 250673-00 |
| Production Date | 2025.02.05 |
| Made in | Denmark |
| Performance Specifications | |
| Max Load | Push 1500N / Pull 1500N |
| Spindle Pitch | 6mm |
| Speed (no load) | ~6.4 mm/s |
| Speed (full load) | ~5.5 mm/s |
| Protection Class | IP66 |
| Electrical Specifications | |
| Power Supply | 24V DC |
| Max Current | 2.3A |
| Duty Cycle | 20% Max (4 min on / 16 min off) |
| Platform | I/O Customised |
| Physical Specifications | |
| Back Fixture Type | A (ø10.2 stainless steel) |
| Back Fixture Orientation | 2 (90 degrees) |
| Piston Rod Eye | A (ø10.2 stainless steel) |
| Built-in Dimension | 210mm |
| Connection Specifications | |
| Brown Wire | +24V DC Power Supply |
| Blue Wire | GND (Power Supply Negative) |
| Red Wire | Extend Actuator (Digital Input) |
| Black Wire | Retract Actuator (Digital Input) |
| Yellow Wire | Endstop Reached Inwards (Digital Output) |
| Green Wire | Endstop Reached Outwards (Digital Output) |
| Orange Wire | Position Feedback + (Analog Output) |
| Light Blue Wire | Position Feedback - (Analog Output) |
| Grey Wire | Bluetooth® Antenna (Configuration) |
| Compatible Software | |
| Configuration Tool | Actuator Connect™ via Bluetooth® |
Input/Output Technical Details
| Signal Type | Specification | Comments |
|---|---|---|
| Digital Input (Red/Black) | Signal becomes active at >67% of VIN | Input current: 10 mA |
| Digital Output (Yellow/Green) | Output voltage min: VIN - 2V | Current draw max: 100 mA |
| Analog Feedback | 0-10V or 4-20mA (model dependent) | Differential output |
Environmental Conditions
- Operating temperature: -40°C to +85°C
- Full performance: +5°C to +40°C
- Storage temperature: -55°C to +105°C
!
!
Setup Motors
!Pasted image 20250327100008.png
!
!Pasted image 20250327104037.png !Pasted image 20250327101403.png