67 lines
1.4 KiB
Markdown
67 lines
1.4 KiB
Markdown
***
|
|
|
|
#AllenBradley
|
|
|
|
From Tody:
|
|
***
|
|
```
|
|
Hmi PVP_A45140
|
|
|
|
Desktop system passwords
|
|
Administrator : 82549
|
|
|
|
|
|
Runtime factory talk
|
|
|
|
Pass RunTime: L82549m/
|
|
Domanda sicurezza: In quale azienda lavori?
|
|
Risposta: vetromeccanica
|
|
|
|
Pass VNC 100
|
|
```
|
|
|
|
### 1-The first startup we need to calibrate the Touch and set the panel password:
|
|
|
|
password: Vetromeccanica24
|
|
|
|
After this we set the IP
|
|
### 2-Set the IP on the PLC:
|
|
|
|
![[Pasted image 20240930103200.png]]
|
|
|
|
Press Disable BOOTP to save the IP on the EPPROM:
|
|
|
|
![[Pasted image 20240930141113.png]]
|
|
|
|
|
|
Best way is to only connect to the device you want to set the ip. Then we Add Relation on the Boot DHCP Tool from Rockwell.
|
|
|
|
### 3-Then we need to start the Firmware client on the PanelView
|
|
|
|
==For selecting the firmware we need to check our software version. ==
|
|
If we have a FactoryTalk v13 the maximun firmaware version will be 13.7. This can be checked in the Rockwell Software, under the "Software" tab and then selecting "Version Information".
|
|
|
|
|
|
![[Pasted image 20240930113049.png]]
|
|
|
|
|
|
### 4-Then we update the firmware of the PLC using the ControlFLASH Plus:
|
|
|
|
1. After give the IP to the panel
|
|
2. ==Need to Start the Firmware update from the panel==
|
|
3. Start the update on the ControlFLASH Plus
|
|
|
|
![[Pasted image 20240930112757.png]]
|
|
|
|
|
|
![[Pasted image 20240930114604.png]]
|
|
|
|
### Desktop Access Password
|
|
***
|
|
|
|
![[Pasted image 20240930115247.png|625]]
|
|
|
|
Vetromeccanica24
|
|
Vetromeccanica24
|
|
Vetromeccanica
|
|
Vetromeccanica24 |