Miguel
/
Obsidean_VM
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Obsidean_VM/EXTRA/06-BARILA AMES - PROCOMAC M.../Notes to migrate.md

2.3 KiB
Raw Blame History

For conversion from SCL-500 to control Logix

Open the RSS project and then Save As ACD Select

!Pasted image 20240227220304.png

For the OP panel

  1. Open FactoryTalk View Studio
    1. New Application
    2. Select resolution
    3. Import..

!Pasted image 20240227220644.png

https://www.youtube.com/watch?v=CaJQ9lVweYY

  • RSLogix Project Migrator
  • Convert 3 Rockwell SLC 505 PLC to Contrologix.
    • Transport PLC QT1(keep existing 1734 remote I/O but convert from Device Net to ethernet communications)
    • Robot 1 PLC QR1 (keep existing 1734 remote I/O but convert from Device Net to ethernet communications)
    • Robot 2 PLC QR2 (keep existing 1734 remote I/O but convert from Device Net to ethernet communications) ( Program will be similar to Robot 1)
  • Convert all Rockwell Device Net to Ethernet. Barilla will be responsible for all wiring changes. The following list is the device Net components:
    • Power Flex 70 VFD drives.
    • 1734 remote I/O
    • Robots
    • All Panel View stations are using ethernet communications and will remain the same.
  • There are 4 electrical cabinets as follows:
    • QT1 – Main PLC cabinet for transport located near case packers.
    • QT2 – Remote cabinet for transport located in warehouse near robots 1 and 2.
    • QR1 – Robot 1 PLC
    • QR2—Robot 2 PLC
    • I will provide a link, so you receive a copy of the prints.
      • QR1 and QT1 and QT2 are combined in a single file.
      • QR2 is a separate file.

• Replace old Rockwell SLC 505’s (3 total) with new Contrologix 1756-L82E or –L83E • Convert SLC programs (3 total) to Contrologix. Robot 1 and Robot 2 PLC programs are similar. • Keep existing point I/O but replace Device Net communication module with Ethernet • Replace all HIM with Touch Screen HIM 2711P-T10C22D9P • Remove any Device net communication and replace with Ethernet • Convert robots to Ethernet communication • Replace all VFD drives with AB 525 series • Provide Barilla with hardware parts list for conversion • Increase SKU memory in PLC to minimum of 300 • Give possible suggestion for improvements to system • List any possible software/firmware changes to Robots • Provide a quote for conversion by February 2022 • Provide a timeline for conversion to determine downtime • Update prints. Barilla will provide PDF copy of existing prints.